1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your American Standard ASH-410 Digital Hot Water Dispenser. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: American Standard ASH-410 Digital Hot Water Dispenser and accompanying brushed nickel faucet.
The American Standard ASH-410 is designed to deliver instant hot water, offering convenience for various kitchen tasks. It features a digital temperature display and a 2.4-quart stainless steel tank with a 1500-watt heating element, capable of dispensing over 60 cups of near-boiling water per hour.
2. Informazzjoni dwar is-Sigurtà
- Kun żgur li l-konnessjonijiet elettriċi kollha jikkonformaw mal-kodiċijiet lokali.
- Do not operate the dispenser without water in the tank.
- Dejjem skonnettja l-enerġija qabel isservi.
- This appliance is designed for use with open vent faucets only. Using other faucet types will void the warranty and may cause damage.
- Keep children away from the hot water faucet.
3. Setup u Installazzjoni
This section outlines the steps for installing your hot water dispenser. Professional installation is recommended.
3.1 Komponenti Fuqview
Figura 2: Fuq view of the hot water dispenser showing the inlet (blue, 3/8" NPSM x 1/4" Push fit) and outlet (red, 3/8" NPSM Brass plated barb connector) connectors.
Familiarize yourself with the dispenser's connections before proceeding.
3.2 Dispenser Dimensions
Figure 3: Dimensions of the ASH-410 dispenser: 7.5 inches (190 mm) wide, 7.5 inches (190 mm) deep, and 10.3 inches (262 mm) high.
Ensure adequate space under your sink for the dispenser unit.
3.3 Faucet Dimensions
Figure 4: Dimensions of the included dual-handle faucet: 4.8 inches wide, 1.76 inches deep at the base, and 12 inches high with a spout height of 8.9 inches.
Confirm the faucet will fit your sink opening and desired aesthetic.
3.4 Dijagramma ta' Installazzjoni
Figure 5: Diagram illustrating the typical under-sink installation. The dispenser connects to the cold water line and the hot water faucet, with the faucet also connecting to the main cold water line for cold water dispensing. The dispenser requires a standard 110V electrical outlet.
- Ipprepara ż-żona tas-sink: Ensure the power supply to the sink area is off. Turn off the main water supply.
- Installa l-Faucet: Mount the hot/cold faucet into the designated hole on your sink or countertop. Secure it according to the faucet's specific instructions.
- Mount the Dispenser: Place the hot water tank securely under the sink.
- Qabbad il-Linji tal-Ilma:
- Connect the cold water supply line to the faucet's cold water inlet.
- Connect the hot water dispenser's inlet (blue connector) to the cold water supply line (typically via a tee-fitting).
- Connect the hot water dispenser's outlet (red connector) to the hot water inlet on the faucet.
- Konnessjoni Elettrika: Plug the dispenser into a grounded 110V electrical outlet.
- Iċċekkja għal Tnixxijiet: Turn on the main water supply and check all connections for leaks.
- Imla t-Tank: Open the hot water side of the faucet to allow the tank to fill completely. Water should flow from the faucet once the tank is full.
4. Istruzzjonijiet Operattivi
This section details how to use the digital hot water dispenser.
4.1 Control Panel Overview
Figure 6: Digital display showing temperature settings and controls. Features include an On/Off button, Temperature Setting button, and Temperature Confirmation button. The display shows both the set temperature and the actual heating temperature.
4.2 L-Istartjar Inizjali
- After installation and filling the tank, ensure the dispenser is plugged in.
- Agħfas u żomm il-buttuna tal-qawwa (Buttuna mixgħul/mitfi) for 3 seconds to turn on the electronic instant hot water dispenser. The display will light up.
4.3 Issettjar tat-Temperatura
The dispenser allows you to select from several preset temperatures.
- Mess il- Issettjar tat-Temperatura button. The "SETTING" temperature will flash.
- Continue touching the Issettjar tat-Temperatura button to cycle through the available temperature options: 167°F, 176°F, 185°F, 194°F, 203°F, 206°F, and 208°F.
- Once your desired temperature is displayed, touch the Temperature Confirmation button to set it. The display will stop flashing.
- The "HEATING ACTUAL" display will show the current water temperature as it heats to your set point. An audible beep will indicate heating activity.
4.4 Tqassim ta' Ilma sħun
Once the desired temperature is reached, operate the hot water handle on your faucet to dispense hot water.
Note: The tank automatically refills with cold water as hot water is dispensed. It then reheats to the set temperature. If a large amount of hot water is drawn, there may be a brief waiting period for the water to reach the set temperature again.
5. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tad-dispenser tal-ilma sħun tiegħek.
- Tindif: Wipe the exterior of the dispenser and faucet with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
- Tneħħija tal-Ġebla: In areas with hard water, mineral deposits can accumulate. Consult a qualified plumber for descaling procedures if you notice reduced flow or heating efficiency.
- Sostituzzjoni tal-filtru: If an inline water filter is installed with your system, follow the filter manufacturer's instructions for replacement.
- Spezzjoni Perjodika: Periodically check all water connections for leaks.
6 Issolvi l-problemi
Irreferi għal din it-taqsima għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No hot water / Dispenser not heating |
|
|
| Ilma mhux sħun biżżejjed |
|
|
| Ilma jqattar mill-vit |
|
|
| Fluss ta 'ilma baxx |
|
|
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | ASH-410 (41-ASH-410-F565-BN) |
| Brand | Standard Amerikan |
| Kapaċità | 2.4 Quarts |
| Wattage | 1500 watt |
| Voltage | 110V |
| Materjal | Stainless Steel |
| Product Dimensions (Dispenser) | 7.75"D x 10.3"W x 7.75"H (madwar 19.7cm D x 26.2cm W x 19.7cm H) |
| Firxa tat-Temperatura | Selectable presets from 167°F to 208°F (75°C to 98°C) |
| Tip ta' Installazzjoni | Under-sink, Freestanding |
| Stil tal-Vit | Dual Handle (Brushed Nickel) |
| Piż tal-oġġett | 15.32 liri (madwar 6.95 kg) |
| UPC | 707534205221 |
8. Informazzjoni dwar Garanzija
American Standard products are manufactured to high-quality standards. This hot water dispenser is designed to work with open vent faucets only. The use of any other type of faucet will void the warranty.
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official American Standard websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
9. Appoġġ u Kuntatt
If you require further assistance, have questions not covered in this manual, or need to report an issue, please contact American Standard customer support.
- Appoġġ onlajn: Żur l-Istandard Amerikan uffiċjali websit għal FAQs, reġistrazzjoni tal-prodott, u riżorsi ta' appoġġ.
- Appoġġ bit-Telefon: Refer to your product packaging or the American Standard websit għan-numri ta' kuntatt tas-servizz tal-konsumatur l-aktar aġġornati.
When contacting support, please have your model number (ASH-410) and proof of purchase available.
