Okin 2-Pin Y Splitter Cable Power Cord Replacement (4.6ft & 0.66ft)

1. Prodott Aktarview

The Okin 2-Pin Y Splitter Cable is designed to provide a multi-functional power solution for electric furniture. This cable allows a single power supply transformer to power two motors simultaneously, commonly found in electric recliners and lift chairs. It features a 2-pin hybrid plug (one round, one flat) for connection to the transformer and two 2-pin sockets with clips for motor attachment. This product is ideal for replacing damaged cords or expanding existing power systems.

Image 1: The Okin 2-Pin Y Splitter Cable, showing the main cable and two branch cables.

2. Informazzjoni dwar is-Sigurtà

Always disconnect power from the main power supply before installing or removing the splitter cable.
Ensure all connections are secure and free from damage before restoring power.
Do not expose the cable to water or excessive moisture.
Avoid placing heavy objects on the cable or bending it sharply, as this can cause damage.
If the cable appears damaged, discontinue use immediately and replace it.

3. Kontenut tal-Pakkett

1 x Okin 2-Pin Y Splitter Cable Power Cord (Main cable: 4.6 ft, Branch cables: 55 inches and 8 inches)

Note: Motor and transformer are not included.

4. Setup u Installazzjoni

Follow these steps to correctly install your Okin Y Splitter Cable:

Skonnettja l-Enerġija: Ensure the electric recliner or lift chair is unplugged from the wall outlet to prevent electrical hazards.
Identifika Konnessjonijiet: Locate the power supply transformer and the motor connection ports on your electric furniture.
Qabbad mat-Trasformatur: Take the 2-pin hybrid plug (one round, one flat) of the Okin Y splitter cable and securely connect it to the output port of your power supply transformer.
Connect to Motors: Attach each of the two 2-pin sockets with clips from the Y splitter cable to the corresponding input ports on your recliner motors. Ensure the clips are fully engaged for a secure connection.
Organizza Kejbils: Route the cables neatly to avoid pinching or tripping hazards.
Irrestawra l-Enerġija: Once all connections are secure, plug the electric recliner or lift chair back into the wall outlet.

Diagram showing Okin Y Splitter Cable connections to transformer and motors

Image 2: Connection diagram illustrating how to connect the Y splitter cable to a power supply transformer and two recliner motors.

5. Istruzzjonijiet Operattivi

Once the Okin Y Splitter Cable is correctly installed, the operation of your electric recliner or lift chair remains unchanged. Use the existing controls (hand remote or integrated buttons) of your furniture to operate the motors as usual. The splitter cable simply facilitates power distribution from a single source to two motors.

6. Manutenzjoni

Tindif: Wipe the cable with a dry, soft cloth. Do not use liquid cleaners.
Spezzjoni: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors.
Ħażna: If storing the cable, coil it loosely. Avoid tight coiling or kinking, which can damage the internal wires.
Ambjent: Keep the cable away from extreme temperatures, direct sunlight, and areas where it might be chewed by pets or damaged by furniture movement.

7 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
No power to either motor.	Main power supply unplugged. Faulty power supply transformer. Y splitter cable not securely connected to transformer. Damaged Y splitter cable.	Check wall outlet and main power cord. Test transformer with a single motor if possible, or replace. Ensure the 2-pin hybrid plug is fully inserted into the transformer. Inspect cable for visible damage; replace if necessary.
Only one motor receives power.	Loose connection to the non-working motor. Mutur difettuż. Damage to one branch of the Y splitter cable.	Check the 2-pin socket connection to the non-working motor. Test the motor directly if possible, or swap connections to isolate the issue. Inspect the specific branch cable for damage; replace the Y splitter if damaged.

8. Speċifikazzjonijiet

Numru tal-Mudell: R5.216.01.024D
Main Cable Length: 1.4 metru (4.6 pied)
Branch Cable Lengths: 140 ċm (55 pulzier) u 20 ċm (8 pulzier)
Connector Type (Input): 2-pin hybrid plug (one round, one flat)
Connector Type (Output): Two 2-pin sockets with clips
Materjal: High-quality pure copper core
Piż tal-oġġett: Madwar 2.89 uqija
Dimensjonijiet tal-pakkett: 8.7 x 6.34 x 1.14 pulzieri

9. Kompatibilità

This Okin 2-Pin Y Splitter Cable is compatible with a wide range of electric recliners and lift chairs that utilize a 2-pin hybrid connection for their power supply and motors. Known compatible brands include:

Okin
Dewert
Lazyboy
Kburija
Catnapper
Limoss

Always verify the plug design of your existing components to ensure compatibility before purchase.

10. Garanzija u Appoġġ

For any questions, concerns, or support regarding your Okin 2-Pin Y Splitter Cable, please contact Okin customer service. Refer to your product packaging or the Okin official webis-sit għall-aktar informazzjoni ta' kuntatt u dettalji tal-garanzija aġġornati.

	Istruzzjonijiet tal-Assemblaġġ għas-Siġġu Recliner Power Lift YB2213 Gwida tal-assemblaġġ pass pass għas-siġġu recliner power lift YB2213, inkluż il-kontenut tal-pakkett, il-passi tal-konnessjoni, u l-istruzzjonijiet tal-wajers għall-qawwa u r-remotes. Jinkludi funzjonijiet ta' sħana u massaġġi.
	Gwida għas-Sostituzzjoni tal-Kontrollur Remot OKIN HSW306 minn 5-Pin għal 7-Pin Istruzzjonijiet pass pass għas-sostituzzjoni ta' kontrollur remot OKIN HSW306 b'5 pinnijiet għal siġġu recliner b'mudell b'7 pinnijiet, inkluż bypass tal-wajers, passi ta' installazzjoni, u aċċessorji rakkomandati.
	Gwida għas-Soluzzjoni tas ...Sistemi Okin: Tiswija u Manutenzjoni tas-Siġġijiet tal-Irfigħ Gwida komprensiva għas-soluzzjoni tal-problemi għas-Sistemi Okin użati fis-siġġijiet tal-irfigħ. Tgħallem tiddijanjostika u tirranġa problemi komuni bil-kontrolli tal-idejn, transformers, muturi, u ġewż tal-ispindle. Tinkludi pariri dwar l-installazzjoni.
	Manwal tal-Utent tas-Sistema ta' Kontroll mill-Bogħod OKIN RF.31.24.01 Manwal komprensiv għall-utent għas-sistema ta' kontroll remot OKIN RF.31.24.01 b'22 ċavetta, li jiddeskrivi l-funzjonijiet tal-buttuni, il-proċeduri tal-issettjar tal-pożizzjoni, u l-komponenti tas-sistema għal sodod aġġustabbli.
	Gwida għall-Istruzzjonijiet u t-Tħaddim tal-Funzjoni tal-Kaxxa tal-Kontroll OKIN CB3433A This document provides a detailed function instruction for the OKIN CB3433A control box, a component for adjustable furniture systems manufactured by OKIN, a Phoenix Mecano Company. It outlines the electrical configuration, describes the control box interface, and explains the operation of various actuators (head, foot, lumbar), massage motors, and underbed RGB lighting. The guide also covers LED indicators, pairing procedures, connectivity options (SYNC, USB, UART), power requirements, and includes FCC and ISED RSS regulatory warnings. Written by Jarek from the R&D Division.
	OKIN S2-2# Dual Column System: Instruction Manual & Operation Guide Comprehensive guide for the OKIN S2-2# Dual Column System. Learn how to operate, set limits, troubleshoot errors, and understand technical specifications for your height-adjustable desk.

Okin R5.216.01.024D