1. Introduzzjoni u Fuqview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Il-karatteristiċi ewlenin jinkludu:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Mobile Power Supply: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- LED Light Functions: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Twaqqif u Użu Inizjali
2.1 Iċċarġjar tal-Apparat
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Istruzzjonijiet Operattivi
3.1 Aqbeż Startjar ta' Vettura
- Kun żgur li l-jump starter ikun iċċarġjat kompletament.
- Qabbad il-batterija smart clamp to the jump starter.
- Waħħal l-aħmar (+) clamp mat-terminal pożittiv tal-batterija tal-vettura.
- Waħħal l-iswed (-) clamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Ibda l-magna tal-vettura.
- Ladarba l-vettura tibda, neħħi immedjatament il-klampiamps from the vehicle battery, then disconnect the smart battery clamp mill-jump starter.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 L-Użu tal-Kompressur tal-Arja
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Użu bħala Power Bank
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- Output USB 1: 5V=3A, 9V=2A, 12V=1.5A
- Output USB 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 LED Light Functions
The device includes multiple LED light modes:
- Dawl Stabbli: Għal illuminazzjoni ġenerali.
- Modalità SOS: Għal sinjalar ta' emerġenza.
- Dawl Strobe: For attracting attention.
Press the light button to cycle through the different modes.
4. Manutenzjoni
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Iċċarġjar regolari: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
- Ħażna: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- Tindif: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasive materials.
- Spezzjoni tal-Cable: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5 Issolvi l-problemi
Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom:
| Messaġġ ta' Żball | Kawża | Soluzzjoni |
|---|---|---|
| ŻBALL | Jumper cables connected with reversed polarity to the car battery. | Qabbad il-batterija clamps to the correct positive and negative terminals. |
| BAXXA | Batterija tal-karozza konnessa b'mod korrett, iżda batterija voltage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| OUT IN | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| BIDU | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| BIDU | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Speċifikazzjonijiet
Detailed technical specifications for the Enthuze ENT-TD6000:
| Parametru | Valur |
|---|---|
| Isem tal-Prodott | Jump Starter bil-Kumpressur tal-Ajru |
| Mudell | ENT-TD6000 |
| Daqs | 193 x 110 x 53mm |
| Medda tal-Pressjoni tal-Inflazzjoni | 0.2-8bar / 3-120psi |
| Temperatura operattiva | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Temperatura tal-Ħażna | -10°C ~ 50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Kapaċità tal-batterija | 41.44Wh (14.8V, 2.8Ah) |
| Ħoss tax-Xogħol | Inqas minn 80dB 'il bogħod minn metru |
| Input tal-Iċċarġjar | 5V=3A |
| Ħin tal-Iċċarġjar | Madwar 3.5 sigħat |
| Output USB 1 | 5V=3A, 9V=2A, 12V=1.5A |
| Output USB 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | ± 1psi |
| Start Car Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Twissijiet ta 'Sigurtà Importanti
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Iċċarġja biss il-batterija interna f'żona b'ventilazzjoni tajba.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Riskju ta' Korriment lil Persuni. Tużax dan il-prodott jekk il-korda tad-dawl jew il-kejbils tal-batterija huma mħassra b'xi mod.
- Dan l-apparat mhuwiex maħsub għall-użu f'faċilità ta' tiswija kummerċjali.
- Dan l-apparat huwa maħsub biex jinħażen ġewwa meta ma jkunx qed jintuża. Dan l-apparat m'għandux jinħażen jew jitħalla barra meta ma jkunx qed jintuża.
- Dan l-apparat huwa maħsub għal użu temporanju barra u għandha tingħata attenzjoni raġonevoli meta jintuża dan l-apparat f'kundizzjonijiet imxarrba.
8. Garanzija u Appoġġ
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
