Manwal tal-Istruzzjonijiet tal-Vivo Dual Monitor Desk Mount STAND-V032

Introduzzjoni

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your VIVO Dual Monitor Desk Mount STAND-V032. Designed for two LCD/LED screens ranging from 13 to 32 inches and weighing up to 22 lbs each, this mount offers enhanced ergonomic flexibility and helps reclaim valuable desk space. Please read all instructions carefully before installation and use.

Informazzjoni dwar is-Sigurtà

TWISSIJA:

Do not exceed the weight capacity of 22 lbs (10 kg) per screen. Failure to do so may result in serious injury or property damage.
Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
Uża dan il-prodott biss għall-iskop maħsub tiegħu.
If you do not understand these instructions or have doubts about the safety of the installation, please contact VIVO Customer Support.
Check that all components are present and undamaged before assembly. Do not use damaged parts.
Żomm partijiet żgħar 'il bogħod mit-tfal.

Setup u Installazzjoni

Follow these steps to correctly assemble and install your VIVO Dual Monitor Desk Mount. For a visual guide, please refer to the official assembly video below.

Vidjow: VIVO Dual Monitor Desk Mount Assembly Guide (Model STAND-V002, similar to STAND-V032)

This video demonstrates the step-by-step assembly process for a VIVO dual monitor desk mount, including attaching the clamp, installing the arms, and mounting the monitors. While the video references model STAND-V002, the assembly procedure is largely identical for the STAND-V032.

Step 1: Attach Desk Clamp lejn Pollakk

Loosen the knob on the C-clamp.
Insert the main pole into the clamp.
Tighten the knob to secure the pole to the clamp.
Poġġi l-clamp on your desktop (up to 3.25" thick) and tighten the knob until the assembly is firmly secured. Ensure your desktop is flat and has a straight edge for proper clamping.

Image showing the C-clamp attachment to a desk, highlighting desktop compatibility.

Immaġni: Desktop Compatibility and C-Clamp Installation. This image illustrates how the C-clamp attaches to a desk edge, emphasizing compatibility with flat and straight-edged desktops up to 3.25 inches thick.

Step 2: Install Swivel Arm and Cable Clips

Slide the swivel arm assembly onto the main pole at your desired height.
Secure the swivel arm in place using the provided Allen wrench.
Place the pole cap atop the main pole.
Attach the pole cable clip to the main pole and the arm cable clips to the swivel arms. These will be used for cable management.

Pass 3: Waħħal Pjanċi VESA mal-Moniters

Attach the VESA plates to the back of your monitors using the appropriate screws. Ensure your monitors have VESA 75x75mm or 100x100mm mounting holes.
Carefully slide the monitors (with attached VESA plates) onto the ends of the swivel arms.
Secure the monitors in place using the provided cap nuts.

Image showing VESA mounting patterns on the back of a monitor.

Immaġni: VESA Compatibility. This image displays the VESA 75x75mm and 100x100mm mounting patterns on the back of a monitor, indicating where the VESA plate should be attached.

Istruzzjonijiet Operattivi

The VIVO Dual Monitor Desk Mount offers extensive adjustability to optimize your viewing experience and ergonomic posture.

Aġġustament Għoli

To adjust the height of both monitors simultaneously, loosen the screws on the swivel arm assembly where it attaches to the main pole.
Slide the entire arm assembly up or down the pole to your desired height.
Tighten the screws firmly to secure the arms in the new position.

Image illustrating custom viewing height adjustment along the 16-inch pole.

Immaġni: Custom Viewing Height. This image demonstrates how the monitor height can be adjusted along the 16-inch central pole for optimal viewing.

Inklinazzjoni, Dawra, u Rotazzjoni

Mejjel: The adjustable brackets allow for a tilt range of +90° to -90°. Loosen the tilt adjustment screw behind the VESA plate, adjust the monitor to the desired angle, and then re-tighten.
Dawwar: Monitors can swivel 180° (90° left, 90° right) at the arm joints. Gently push or pull the monitor to achieve the desired angle.
Rotazzjoni: Monitors can rotate 360° for portrait or landscape orientation. Simply turn the monitor to the preferred orientation.

Image showing articulation options: tilt, swivel, and rotation.

Immaġni: Easy Articulation. This image visually explains the tilt (+90° to -90°), swivel (180°), and rotation (360°) capabilities of the monitor arms.

Ġestjoni tal-Cable

Utilize the provided cable clips along the arms and main pole to route and organize your monitor cables. This helps maintain a clean and clutter-free workspace.

Issolvi l-problemi

Il-moniters mhumiex livellati: Ensure the VESA plates are securely attached to the monitors and the arms are tightened evenly. Minor adjustments can be made by slightly loosening and re-tightening the arm joints.
Monitors sag or drift: Verify that all adjustment screws, especially those for tilt and height, are tightened sufficiently. The mount is designed for solid steel construction to prevent drift.
Il-muntatura tħossha instabbli: Double-check that the desk clamp is securely fastened to the desktop and that the desktop thickness is within the specified range (up to 3.25 inches).
Cables are messy: Utilize all provided cable clips to route and secure cables along the arms and pole.

Speċifikazzjonijiet

Karatteristika	Dettall
Numru tal-Mudell	STAND-V032
Kompatibbiltà tad-Daqs tal-Iskrin	13" to 32" (each)
Kapaċità tal-piż	22 lbs (10 kg) per screen
Kompatibilità VESA	75x75mm, 100x100mm
Angolu Mejjel	+90° sa -90°
Angolu li jdur	180°
Rotazzjoni	360° (Ritratt/Pajsaġġ)
Tip ta 'Immuntar	C-Clamp or Grommet (up to 3.25" desk thickness)
Materjal	Azzar Liga, Aluminju
Kulur	Iswed

Image showing key measurements and specifications of the monitor mount.

Immaġni: Product Measurements. This image provides a visual overview of the mount's dimensions, including arm span, pole height, VESA standard, weight capacity, and screen size compatibility.

Garanzija u Appoġġ

VIVO is committed to providing high-quality products and excellent customer service. Your VIVO Dual Monitor Desk Mount is backed by our commitment to quality.

U.S. Based Support: Our Sales and Technical Support team members are based in the U.S. to provide the highest quality support and availability.
Protezzjoni tal-Prodott: VIVO offers generous product protection. For specific warranty details, please refer to the product packaging or contact VIVO Customer Support directly.
Ikkuntattjana: If you have any questions, require assistance with assembly, or need troubleshooting, please reach out to VIVO Customer Support. Contact information can typically be found on the VIVO webis-sit jew l-imballaġġ tal-prodott.

Image showing VIVO's US-based support team.

Immaġni: VIVO U.S. Based Support. This image highlights VIVO's commitment to customer service with a visual of their support team.

	VIVO STAND-V032 Dual Monitor Desk Mount - Installation Guide This instruction manual provides detailed steps for assembling and installing the VIVO STAND-V032 Dual Monitor Desk Mount. It includes safety warnings, package contents, tools required, and contact information for support.
	VIVO Dual Monitor Desk Stand STAND-V032F/FW Instruction Manual Instruction manual for the VIVO Dual Monitor Desk Stand (Model STAND-V032F/FW). Includes package contents, tools needed, and step-by-step assembly instructions for mounting two monitors up to 32 inches.
	VIVO Dual Ultrawide Vertical Monitor Desk Stand STAND-V200L Instruction Manual Instruction manual for the VIVO Dual Ultrawide Vertical Monitor Desk Stand (STAND-V200L). This guide provides detailed steps for assembly, installation, and adjustment of the monitor desk stand, including package contents, tools needed, and safety warnings.
	VIVO DESK-V100EBY Qafas ta' Skrivanija bil-Wieqfa b'Mutur Uniku Elettriku Iswed - Manwal tal-Immuntar Istruzzjonijiet tal-assemblaġġ għall-Qafas tal-Iskrivanija bil-Wieqfa b'Mutur Uniku Elettriku Iswed VIVO DESK-V100EBY. Tgħallem kif tiġbor l-iskrivanija aġġustabbli tiegħek b'gwida pass pass, twissijiet ta' sigurtà, u listi tal-partijiet.
	Gwida tal-Assemblaġġ tal-VIVO Dual Monitor Desk Mount STAND-V002/W/WD Manwal ta' struzzjonijiet għall-VIVO Dual Monitor Desk Mount (STAND-V002/W/WD), li jipprovdi passi dettaljati tal-assemblaġġ, informazzjoni dwar is-sigurtà, u kuntatti tal-appoġġ għall-klijenti.
	VIVO DESK-VE36B Black Electric Desk Riser Instruction Manual This instruction manual provides assembly steps, safety warnings, and contact information for the VIVO DESK-VE36B Black Electric Desk Riser. Learn how to safely set up and use your height-adjustable desk converter.

VIVO STAND-V032