FLEXISPOT EN1 Electric Stand Up Desk User Manual

1. Introduzzjoni

Welcome to the user manual for your FLEXISPOT EN1 Electric Stand Up Desk. This document provides essential information for the safe and efficient use of your new adjustable desk. Please read all instructions carefully before assembly and operation.

Twissijiet ta' Sigurtà

• Taqbiżx il-limitu massimu ta 'piż ta' 176 lbs (80 kg).
• Keep fingers and other body parts clear of moving parts during operation to prevent injury.
• Ensure all cables are properly managed and secured to avoid entanglement or damage during height adjustments.
• Follow all assembly instructions carefully and use tools safely.
• Dan il-prodott huwa maħsub għall-użu mill-adulti.

2. Komponenti Inklużi

Before beginning assembly, verify that all parts listed below are present in your package. Refer to the installation video for visual identification of components.

• One-Piece Desktop (55 x 28 inches, Rustic Top)
• Desk Frame (Black)
• Lifting Columns (2 units)
• Desk Feet (2 units)
• Crossbeam
• Supporting Plates (2 units)
• Motor with Keypad (4-memory presets)
• Virga tat-Trażmissjoni
• Akkoppjar
• Plug tal-Qawwa
• Hooks (for headphones/accessories)
• Assembly Tools (Allen wrench, spanner)
• Manwal ta' Istruzzjoni

Nota: The desktop and desk frame may ship and arrive separately.

Image: Packaging showing separate boxes for desktop and frame.

3. Istruzzjonijiet tal-Assemblea

Follow these steps to assemble your FLEXISPOT EN1 desk. A detailed installation video is provided below for visual guidance.

Gwida tal-Vidjow tal-Installazzjoni

Video: FLEXISPOT Standing Desk Frame Installation Guide. This video demonstrates the step-by-step assembly process for the desk frame and motor components.

Assemblea Pass Pass

1. Insert Coupling into Motor: Carefully insert the coupling into the motor. Ensure it is oriented correctly as shown in the installation video (0:09 mark).
2. Insert Motor and Right Column: Waħħal l-assemblaġġ tal-mutur mal-kolonna tal-irfigħ tal-lemin. Waħħalha billi tuża l-viti u l-wrench Allen provduti (marka 0:16).
3. Install Crossbeam: Align the three protrusions on the lifting column with the holes in the crossbeam and secure it with screws (0:25 mark).
4. Install Support Plates: Attach the two support plates to the top of the lifting columns using the provided screws (0:35 mark).
5. Install Desk Feet: Secure the desk feet to the bottom of the lifting columns using the provided screws (0:40 mark).
6. Adjust Crossbeam: Loosen the screws on the crossbeam, adjust the width to fit your desktop, and then tighten the screws securely (0:47 mark).
7. Installa l-Bord tal-Mejda: Place the desktop upside down on a soft, clean surface. Carefully position the assembled frame onto the desktop. Use a drill (prepared by customer) and the provided screws to attach the desktop to the frame (0:59 mark).
8. Install Transmission Rod: Insert the transmission rod into the motor and the left lifting column, ensuring it connects properly (1:07 mark).
9. Tighten Transmission Rod Nut: Use the spanner to tighten the nut on the transmission rod (1:19 mark).
10. Installa Tastiera: Mount the control keypad to the underside of the desktop in a convenient location using screws (1:22 mark).
11. Installa Ganċijiet: Attach the accessory hooks to the underside of the desktop as desired (1:25 mark).
12. Qabbad Kejbils: Connect all necessary power and control cables as shown in the video (1:30 mark). Ensure connections are secure and cables are managed to prevent interference with movement.

Once assembly is complete, carefully flip the desk upright. Ensure it is stable before placing any items on it.

4. Istruzzjonijiet Operattivi

Your FLEXISPOT EN1 desk features smooth electric height adjustment and convenient memory presets for personalized comfort.

Aġġustament Għoli

• Għolli l-Iskrivanija: Agħfas u żomm il- 'Il fuq (^) button on the control panel to raise the desk to your desired standing height.
• Desk t'Isfel: Agħfas u żomm il- 'L isfel (v) button on the control panel to lower the desk to your desired sitting height.
• The desk height can be adjusted smoothly and quietly between approximately 29.1 inches (sitting) and 46.7 inches (standing), including the 1-inch tabletop thickness.

Image: Programmable Control Panel with LED display and memory presets.

Presets tal-Memorja

The control panel features four memory preset buttons (1, 2, 3, 4) to save and recall your preferred sitting and standing heights.

1. Biex Issalva Preset: Aġġusta l-iskrivanija għall-għoli mixtieq tiegħek billi tuża l-buttuni 'l fuq/'l isfel. Agħfas il-buttuna 'M' button (or similar memory set button, often labeled with an 'i' or 'f' followed by a number) once, then immediately press one of the number buttons (1, 2, 3, or 4) to save the current height to that preset. The display will confirm the setting.
2. Biex Recall Preset: Simply press the corresponding number button (1, 2, 3, or 4). The desk will automatically move to the saved height.

Prodott Overview Video

Video: Upgrade Your Space with FLEXISPOT One-Piece Desk. This video highlights the desk's features, including its quiet operation and seamless height transitions.

5. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-iskrivanija tiegħek.

• Tindif: Imsaħ id-desktop u l-qafas b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif li joborxu jew kimiċi ħarxa li jistgħu jagħmlu ħsara lill-finitura.
• Ġestjoni tal-Kejbil: Periodically check that all cables are securely fastened and not interfering with the desk's movement.
• Issikka l-Qfieli: Over time, some fasteners may loosen. Periodically check and tighten all screws and bolts to maintain stability.
• Limitu tal-Piż: Always adhere to the 176 lbs (80 kg) weight limit to prevent damage to the motor and frame.

6 Issolvi l-problemi

Jekk tiltaqa' ma' xi problemi bl-iskrivanija tiegħek, irreferi għall-pariri komuni li ġejjin għas-soluzzjoni tal-problemi:

• L-Iskrivanija Mhux Tiċċaqlaq:
  • Kun żgur li l-kejbil tal-enerġija huwa pplaggjat sew kemm fl-iskrivanija kif ukoll f'sokit tal-ħajt li jaħdem.
  • Check for any obstructions under or around the desk that might be preventing movement.
  • Perform a reset: Unplug the desk for 10 seconds, then plug it back in. Press and hold the 'Down' button until the desk reaches its lowest point and slightly rises, indicating a successful reset.
• Moviment Irregolari:
  • Iċċekkja li l-iskrivanija titqiegħed fuq wiċċ livellat.
  • Check that all assembly screws, especially those on the crossbeam and lifting columns, are securely tightened.
• Kodiċi ta' Żball:
  • If an error code appears on the display, refer to the full troubleshooting guide on the FLEXISPOT websit jew ikkuntattja l-appoġġ tal-klijent.

For persistent issues, please contact FLEXISPOT customer support.

7. Speċifikazzjonijiet

Dijagramma tad-Dimensjonijiet

Image: Visual representation of the desk's desktop size and adjustable frame height.

8. Informazzjoni dwar Garanzija

Your FLEXISPOT EN1 Electric Stand Up Desk comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your package or visit the official FLEXISPOT websit.

9. Appoġġ għall-Klijent

If you have any questions, require assistance with assembly, or need troubleshooting support, please do not hesitate to contact FLEXISPOT customer service.

• Appoġġ onlajn: Żur il-FLEXISPOT uffiċjali website for FAQs, product guides, and contact forms.
• Appoġġ bl-Email: Refer to your product packaging or the FLEXISPOT websit għall-indirizz elettroniku xieraq tas-servizz tal-konsumatur.
• Appoġġ tat-Telefon: Contact numbers can typically be found on the FLEXISPOT webis-sit jew id-dokumentazzjoni tal-prodott tiegħek.