1. Introduzzjoni
The Babymoov Milky Now is an automatic water warmer and dispenser designed to simplify baby bottle preparation. This device provides warm water at the desired temperature quickly and hygienically, suitable for preparing formula or other hot beverages. Please read this manual carefully before first use and keep it for future reference.
2. Istruzzjonijiet Importanti dwar is-Sigurtà
- Always ensure the device is placed on a stable, flat, heat-resistant surface, away from children.
- Do not immerse the device, cord, or plug in water or any other liquid.
- Spluggja mill-iżbokk meta ma tkunx qed tuża u qabel tnaddaf. Ħallih jiksaħ qabel ma tpoġġi jew tneħħi l-partijiet, u qabel tnaddaf l-apparat.
- Tħaddim l-ebda apparat b'korda jew plagg bil-ħsara, jew wara li l-apparat ma jaħdimx jew ikun ġie bil-ħsara b'xi mod.
- Use only distilled or filtered water to prevent mineral buildup and ensure optimal performance.
- Keep children away from the device, especially when it is heating or dispensing hot water.
- Dan l-apparat huwa għall-użu fid-dar biss. Tużax barra.
3. Prodott Aktarview
The Babymoov Milky Now features a sleek design with intuitive controls. Key components include the water tank, control panel, and dispenser nozzle.
4. Setup Inizjali
- Ippakkja: Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Żomm l-imballaġġ għal ħażna jew trasport fil-futur.
- Pjazzament: Place the Milky Now on a clean, dry, stable, and heat-resistant surface, away from direct sunlight or heat sources.
- Tindif Inizjali: Before first use, clean the water tank and all removable parts as described in the 'Cleaning and Maintenance' section.
- Imla t-Tank tal-Ilma: Fill the stainless steel water tank with distilled or filtered water up to the 'MAX' line.
- Konnessjoni tal-Enerġija: Plug the power cord into a suitable electrical outlet. The device will power on.
5. Istruzzjonijiet Operattivi
5.1. Mili tat-Tank tal-Ilma
Ensure the water level is always between the 'MIN' and 'MAX' indicators inside the stainless steel tank. For optimal hygiene and to prevent mineral buildup, use distilled or filtered water.
5.2. L-issettjar tat-Temperatura
Use the control panel to select your desired water temperature. The digital screen will display the current water temperature. The device can heat water from 71°F (22°C) to 212°F (100°C).
5.3. Tqassim tal-Ilma
Place a baby bottle or cup directly under the dispenser nozzle. Press the dispense button. The device is programmed to automatically dispense approximately 2 oz (60ml) of water with a single press. For continuous dispensing, press and hold the button until the desired quantity is reached.
5.4. Funzjoni Żomm Sħun
The Milky Now features an automatic 'keep warm' function, maintaining the set water temperature for up to 6 hours. This ensures warm water is readily available whenever needed.
5.5. Vidjo ta' Dimostrazzjoni tal-Prodott
6. Tindif u Manutenzjoni
6.1. Tindif ta 'Kuljum
After each use, unplug the device and allow it to cool. Empty any remaining water from the tank. Wipe the exterior with a damp cloth. Rinse the stainless steel tank thoroughly with clean water.
6.2. Funzjoni ta' Tindif Awtomatiku
To maintain a healthy and clean environment, use the 'CLEAN' function regularly. This function heats the water to 212°F (100°C) for 3 minutes, sterilizing the water channels. For enhanced cleaning, add a few drops of lemon juice to the water before activating the 'CLEAN' function.
6.3. Tneħħija tal-Ġir
Depending on your water hardness, mineral deposits may accumulate over time. Regular descaling is recommended. Consult the Babymoov website or customer support for specific descaling instructions and recommended products.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Apparat mhux qed jixgħel | Mhux imdaħħal fil-plakka; problema bil-plakka tal-elettriku; apparat li ma jaħdimx sew. | Ensure the power cord is securely plugged into a working outlet. Check the power switch. If the issue persists, contact customer support. |
| Water not heating to desired temperature | Incorrect temperature setting; mineral buildup; device malfunction. | Verify the temperature setting on the control panel. Perform the auto-clean function or descale the device. |
| Inconsistent water dispense volume | Air in the system; mineral buildup in dispenser. | Ensure the water tank is adequately filled. Run the auto-clean cycle to clear any blockages. |
| Water has an unusual taste or odor | Poor water quality; device needs cleaning. | Use only distilled or filtered water. Perform a thorough cleaning and auto-clean cycle. |
8. Speċifikazzjonijiet Tekniċi
- Dimensjonijiet tal-Prodott: 10 x 6.69 x 11.69 pulzieri
- Numru tal-Mudell tal-Oġġett: A002301_US
- Tip ta' Materjal: Stainless Steel
- Sors tal-Enerġija: Corded Elettriku
- Piż tal-oġġett: 10.2 uqija
- Kapaċità tal-Ilma: Approximately 4 cups (1.1 Liters)
- Firxa tat-Temperatura: 71°F (22°C) sa 212°F (100°C)
9. Garanzija u Appoġġ għall-Klijent
The Babymoov Instant Baby Bottle Prep Milky Now is backed by Babymoov's lifetime warranty, ensuring peace of mind for your purchase. For warranty claims, technical assistance, or any questions regarding your product, please visit the official Babymoov webis-sit jew ikkuntattja l-appoġġ għall-klijenti tagħhom direttament. Żomm il-prova tax-xiri tiegħek għall-validazzjoni tal-garanzija.
