Silvercrest SHBS 700 A1 Hair and Beard Trimmer

1. Istruzzjonijiet Importanti dwar is-Sigurtà

Jekk jogħġbok aqra dawn l-istruzzjonijiet bir-reqqa qabel ma tuża l-apparat u żommhom għal referenza futura. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment serju.

• Do not use this appliance near water or in wet environments.
• This appliance is not suitable for use on infants.
• Avoid direct contact with eyes during operation.
• Żomm l-apparat fejn ma jintlaħaqx mit-tfal.
• Uża biss l-adapter tal-enerġija pprovdut għall-iċċarġjar.
• Do not attempt to repair or disassemble the appliance yourself. Contact qualified service personnel.

2. Prodott Aktarview

The Silvercrest SHBS 700 A1 is a versatile hair and beard trimmer designed for cutting, trimming, shaping, and styling. It features a titanium-coated blade block with a ceramic cutting blade for precise and efficient grooming.

Figura 1: Silvercrest SHBS 700 A1 Hair and Beard Trimmer with its charging base. The trimmer features an LED display and power button.

Key features include two speed levels (normal and turbo), a 5-level fine adjustment for cutting length from 0.8 to 2.0 mm, and operation via battery or mains power with a direct drive function. An LED display provides operational information, and a travel lock function prevents accidental activation.

3. X'hemm fil-Kaxxa

The Silvercrest SHBS 700 A1 package includes the following items:

• Trimmer tax-xagħar u tad-daqna
• Bażi tal-Iċċarġjar
• Power Adapter (100-240 V~)
• 1 Thinning Attachment
• 6 Comb Attachments for various cutting lengths:
  • 3.8-5 mm
  • 6.8-8 mm
  • 9.8-11 mm
  • 12.8-14 mm
  • 20.8-22 mm
  • 30.8-32 mm
• Pinzell tat-tindif
• Żejt tax-Xafra
• Imqass tax-xagħar
• Moxt tax-xagħar
• Borża tal-Ivvjaġġar

Figura 2: Complete set of accessories for the Silvercrest SHBS 700 A1 Hair and Beard Trimmer.

4. Setup

4.1 Iċċarġjar tat-Trimmer

1. Place the trimmer into the charging base.
2. Connect the power adapter to the charging base and then plug it into a suitable power outlet (100-240 V~).
3. The LED display will indicate the charging status. Ensure the trimmer is fully charged before first use for optimal battery life.

4.2 Attaching and Detaching Comb Attachments

The trimmer comes with 6 comb attachments and 1 thinning attachment to achieve various cutting lengths.

1. To attach a comb: Align the comb attachment with the trimmer head and slide it on until it clicks securely into place.
2. To detach a comb: Gently push the comb attachment upwards and away from the trimmer head.

Figura 3: Example of a comb attachment (3.8-5mm) for adjusting cutting length.

5. Istruzzjonijiet Operattivi

5.1 Tixgħel/Jitfi

Press the power button located on the front of the trimmer to turn the device on or off.

5.2 Settings tal-Veloċità

The trimmer offers two speed levels: Normal and Turbo. Press the speed selection button (if separate from power, otherwise cycle through with power button) to switch between these modes. The LED display will indicate the current speed setting.

5.3 Cutting Length Adjustment

The trimmer features a 5-level fine adjustment for blade length, ranging from 0.8 mm to 2.0 mm. This can be adjusted directly on the trimmer body. For longer lengths, use the appropriate comb attachments (e.g., 3.8-5 mm, 6.8-8 mm, 9.8-11 mm, 12.8-14 mm, 20.8-22 mm, 30.8-32 mm).

5.4 Travel Lock Function

To prevent unintentional discharge or activation during travel, the trimmer is equipped with a travel lock function. Refer to the specific instructions in your manual for activating and deactivating this feature, typically involving a long press of the power button.

5.5 Pariri Ġenerali dwar l-Użu

• Ensure hair is clean and dry before trimming for best results.
• Always start with a longer comb attachment and gradually reduce the length if desired.
• Mexxi t-trimmer kontra d-direzzjoni tat-tkabbir tax-xagħar għal qatgħa uniformi.
• Use the thinning attachment for reducing hair volume without significantly changing length.

6. Manutenzjoni

6.1 Tindif tat-Trimmer

Tindif regolari jiżgura prestazzjoni ottimali u jestendi l-ħajja tat-trimmer tiegħek.

1. Itfi t-trimmer u skonnettjah mis-sors tal-enerġija.
2. Neħħi kwalunkwe moxt imwaħħal.
3. Use the provided cleaning brush to remove hair clippings from the blades and the trimmer body.
4. The blade block can typically be removed for more thorough cleaning. Refer to your specific manual for instructions on removing and reattaching the blade block.

Figura 4: The included cleaning brush for maintaining the trimmer.

6.2 Blade Care and Oiling

To maintain the sharpness and smooth operation of the blades, apply a small drop of the included blade oil to the blades after every few uses, or as needed. Turn the trimmer on for a few seconds to distribute the oil evenly.

7 Issolvi l-problemi

If you encounter issues with your Silvercrest SHBS 700 A1 trimmer, refer to the following common solutions:

• Trimmer ma jixgħelx: Ensure the battery is charged. Connect the trimmer to the power adapter and try operating it directly from the mains. Check if the travel lock is activated.
• Prestazzjoni ħażina tat-tqattigħ: Clean the blades thoroughly to remove any trapped hair. Apply blade oil. Ensure the blade block is correctly assembled. The blades may be dull and require replacement if the issue persists after cleaning and oiling.
• Storbju mhux tas-soltu: Clean and oil the blades. If the noise persists, contact customer support.

8. Speċifikazzjonijiet Tekniċi

9. Garanzija u Appoġġ

This Silvercrest SHBS 700 A1 Hair and Beard Trimmer is covered by a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or to purchase replacement parts, please contact the retailer or the manufacturer's customer service department. Contact information can typically be found on the product packaging or the manufacturer's official websit.