Introduzzjoni
Thank you for choosing the Total Tools TABLI20018 Lithium-ion Blower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new blower. Please read this manual thoroughly before first use and keep it for future reference.
Image: Total Tools TABLI20018 Lithium-ion Blower, showing the main unit with the nozzle attached.
Istruzzjonijiet Importanti dwar is-Sigurtà
Dejjem segwi l-prekawzjonijiet bażiċi ta’ sigurtà meta tuża apparati elettriċi biex tnaqqas ir-riskju ta’ nar, xokk elettriku, u korriment personali. Aqra l-istruzzjonijiet kollha qabel tuża dan il-prodott.
- Sigurtà Personali: Always wear eye protection, hearing protection, and sturdy footwear. Do not operate the blower while barefoot or wearing open-toed sandals.
- Żona tax-Xogħol: Żomm iż-żona tax-xogħol nadifa u mdawwla sew. Taħdimx f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
- Sigurtà Elettrika: This appliance is battery-powered. Ensure the battery pack is fully charged before use. Do not expose the battery pack or blower to rain or wet conditions.
- Tfal u Persuni li Qegħdin fil-Viċin: Żomm lit-tfal u lil dawk li jkunu fil-qrib 'il bogħod waqt li tkun qed tħaddem il-blower.
- Użu xieraq: Use the blower only for its intended purpose, which is to move leaves, dirt, and debris. Do not point the nozzle at people or animals.
- Manutenzjoni: Disconnect the battery pack before performing any adjustments, changing accessories, or storing the blower.
Komponenti tal-Prodott
Familiarize yourself with the parts of your Total Tools TABLI20018 blower before operation.
- Blower Unit (Motor Housing and Handle)
- Żennuna tal-blower
- Battery Compartment (Battery and charger sold separately)
- Trigger mixgħul/mitfi
- Swiċċ tal-Kontroll tal-Veloċità
Image: Total Tools TABLI20018 Blower, illustrating the P20S 20V system and indicating that battery and charger are sold separately.
Setup u Assemblea
Follow these steps to prepare your blower for use.
- Spakkjar: Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Iċċekkja għal kwalunkwe ħsara.
- Attach the Blower Nozzle: Align the blower nozzle with the outlet on the main blower unit. Push and twist until it locks securely into place. Ensure it is firmly attached before operation.
- Installa Battery Pack: Ensure the battery pack is fully charged. Slide the charged battery pack into the battery compartment on the blower handle until it clicks into place. Ensure it is seated correctly.
Immaġni: Ġenb view of the Total Tools TABLI20018 Blower, showing the main unit without the nozzle, highlighting the handle and battery slot.
Istruzzjonijiet Operattivi
Before operating, ensure you have read and understood all safety instructions.
- Kif Tibda l-Blower: With the battery installed, press the On/Off trigger to start the blower.
- Aġġusta tal-Veloċità: If your model has a speed control switch, adjust it to the desired airflow for the task. The blower features 2 speeds.
- Operating Technique:
- Żomm il-blower sew b'id waħda fuq il-manku.
- Sweep the nozzle from side to side, directing debris away from yourself and others.
- Work in small sections to maintain control.
- Avoid blowing debris towards open windows, cars, or water sources.
- Twaqqif tal-Blower: Release the On/Off trigger to stop the blower.
- Wara l-Użu: Remove the battery pack from the blower after each use to prevent accidental starting and for safe storage.
Manutenzjoni u Ħażna
Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tal-blower tiegħek.
- Tindif:
- Dejjem neħħi l-pakkett tal-batterija qabel it-tindif.
- Imsaħ il-barra tal-blower b'adamp drapp. Tużax deterġenti jew solventi qawwija.
- Clear any debris from the air intake vents and blower nozzle to ensure proper airflow.
- Ħażna:
- Aħżen il-blower f'post niexef u ventilat sew, fejn ma jintlaħaqx mit-tfal.
- Neħħi l-pakkett tal-batterija qabel ma taħżnu għal perjodi twal.
- Aħżen il-pakkett tal-batteriji f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
Immaġni: Angolata view of the Total Tools TABLI20018 Blower, showing the air intake grille on the side of the motor housing.
Issolvi l-problemi
Irreferi għal din it-taqsima għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-blower ma jixgħelx. | Il-batterija mhux installata sew jew skarikata. | Kun żgur li l-batterija tkun iċċarġjata kompletament u mqiegħda sew. |
| Fluss ta 'arja mnaqqas. | Air intake or nozzle blocked by debris. | Remove battery, then clear any obstructions from the air intake and nozzle. |
| Il-blower jieqaf waqt li jkun qed jaħdem. | Il-batterija saħħnet iżżejjed jew skarikata. | Allow battery to cool down or replace with a fully charged battery. |
| Vibrazzjoni eċċessiva. | Loose nozzle or internal debris. | Check nozzle attachment. Remove battery and inspect for internal debris. If problem persists, contact customer support. |
Speċifikazzjonijiet
Technical data for the Total Tools TABLI20018 Lithium-ion Blower.
| Karatteristika | Dettall |
|---|---|
| Mudell | TABLI20018 |
| Brand | Total |
| Voltage | 20 Volts |
| Veloċità | 18000 RPM |
| Volum tal-Arja | 2.7 m³/min |
| Stil | Jinżamm fl-idejn |
| Sors tal-Enerġija | Imħaddem bil-batterija (jone tal-litju) |
| Piż tal-oġġett | 739 g (1.63 Liri) |
| Dimensjonijiet tal-Prodott | 10 x 10 x 10 ċm (madwar) |
| Karatteristiċi Speċjali | Lightweight, 2-speed |
| Komponenti Inklużi | Blower unit only (battery and charger sold separately) |
Image: Size comparison of the Total Tools TABLI20018 Blower, indicating a length of approximately 17 cm (7.0 inches).
Garanzija u Appoġġ
Specific warranty information for the Total Tools TABLI20018 blower is typically provided with the product packaging or can be obtained from the point of purchase. For technical support, service, or to inquire about replacement parts, please contact Total Tools customer service or visit their official websit.
