1. Introduzzjoni
The SCUBAPRO Luna 2.0 AI is a wrist-mounted dive computer designed to provide essential dive data with clarity and ease of use. It features a large, high-contrast display and wireless air integration for monitoring tank pressure and calculating true remaining bottom time (RBT). This manual provides instructions for the proper setup, operation, and maintenance of your Luna 2.0 AI dive computer.
2. Informazzjoni Importanti dwar is-Sigurtà
Always prioritize safety during diving activities. This dive computer is a tool to assist in dive planning and execution, but it does not replace proper dive training, experience, or adherence to safe diving practices. Always follow the guidelines of your certifying agency. Regularly check your equipment before each dive. Consult a physician before diving if you have any health concerns.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tal-prodott tiegħek:
- SCUBAPRO Luna 2.0 AI Wrist Scuba Dive Computer
- Kawża Protettiva
- Silicone Arm Strap
- Read First Manual (Quick Start Guide)
Image: The Luna 2.0 AI dive computer securely placed within its zippered protective case, alongside its accessories.
4. Prodott Aktarview
The Luna 2.0 AI features a robust design with a clear, intuitive display and simple controls.
Immaġni: Quddiem view of the SCUBAPRO Luna 2.0 AI dive computer, showcasing its large, high-contrast display with dive data visible.
Immaġni: Side profile of the Luna 2.0 AI dive computer, highlighting its slim design and control buttons.
Immaġni: Minn fuq għal isfel view of the Luna 2.0 AI dive computer, showing the full length of the silicone arm strap and buckle.
Karatteristiċi ewlenin:
- Skrin faċli biex jinqara: Wide, high-contrast black and white LCD display with large characters and a bright LED backlight.
- Thin, Low Profile: Slim thermoplastic housing with oil fill technology for reliable performance.
- Simple Two-Button Control: Intuitive menu and control for straightforward operation.
- Wireless Air Integration: Monitors tank pressure and provides true remaining bottom time (RBT) calculations based on breathing workload.
- Choice of 2 Algorithms: Predictive Multi-Gas Buhlmann ZH-L16 ADT MB PMG or ZH-L16+GF (Gradient Factor).
- Three Dive Modes & Nitrox Compatible: Scuba, Gauge, & Apnea modes. Nitrox compatible (100%) with 3 selectable gases.
- PDIS (Profile Dependent Intermediate Stops): Calculates an intermediate stop based on N2 loading, current and previous dives, and breathing mixes for safer diving.
- Personalization (MB Levels): Adjust the level of conservatism in the ADT algorithm to match experience, age, and physical conditioning.
- Human Factor Diving: Optional heart rate monitor (sold separately) records heartbeat and skin temperature for decompression calculation.
- Convenient Bluetooth LE Interface: Download dives to iOS or Android devices, or PC/Mac. Firmware is user-updatable.
Image: Close-up of the Luna 2.0 AI display, illustrating key features such as wireless air integration, easy-to-read screen, and multiple dive modes.
5. Setup
5.1 L-Ewwel Tixgħel u s-Settings Bażiċi
- Press and hold any button to power on the device.
- Follow the on-screen prompts to set basic parameters such as language, time, date, and measurement units (metric/imperial).
- Confirm settings to proceed.
5.2 Attaching the Silicone Arm Strap
The silicone arm strap is designed for comfortable and secure wear. Ensure it is properly attached to the dive computer and adjusted to fit snugly on your wrist or arm.
5.3 Wireless Air Integration Setup
The Luna 2.0 AI supports wireless air integration with a compatible SCUBAPRO transmitter (sold separately). To pair:
- Ensure your transmitter is active and within range of the dive computer.
- Navigate to the 'Air Integration' or 'Transmitter Pairing' menu on your Luna 2.0 AI.
- Follow the on-screen instructions to search for and pair with your transmitter.
- Verify that the tank pressure is displayed correctly on the computer.
6. It-Tħaddim tal-Kompjuter tal-Għadis
6.1 Modi ta' Għaddas
The Luna 2.0 AI offers three primary operating modes:
- Scuba Mode: Standard dive mode for recreational and technical diving, providing full decompression calculations.
- Modalità tal-Gauge: Operates as a bottom timer, displaying depth, time, and temperature without decompression calculations.
- Apnea Mode: Optimized for freediving, tracking dive time, surface interval, and depth.
To switch between modes, access the main menu and select the desired mode.
6.2 Issettjar tan-Nitrox
The computer is Nitrox compatible up to 100% oxygen. You can set up to three different gas mixes. To configure Nitrox settings:
- Enter the 'Gas Settings' menu.
- Select the gas number (G1, G2, G3).
- Adjust the oxygen percentage (O2%) and partial pressure of oxygen (PO2) limit for each gas.
6.3 Algorithm Selection and Personalization
The Luna 2.0 AI allows you to choose between two decompression algorithms and adjust conservatism:
- Predictive Multi-Gas Buhlmann ZH-L16 ADT MB PMG: A widely recognized algorithm.
- ZH-L16+GF (Gradient Factor): Offers additional control over decompression profiles.
MB (Microbubble) Levels: Adjusting MB levels allows you to increase or decrease the conservatism of the algorithm to suit your personal physiology, experience, and dive conditions. Refer to the detailed manual for specific guidance on MB level adjustments.
6.4 PDIS (Profile Dependent Intermediate Stops)
This feature calculates an intermediate stop based on nitrogen loading, current and previous dives, and breathing mixes, enhancing dive safety.
6.5 Bluetooth LE Interface
Use the integrated Bluetooth LE to connect your dive computer to a compatible iOS or Android device, or a PC/Mac. This allows for:
- Downloading dive logs for analysis and storage.
- Updating the device firmware.
Vidjo: Overview of the SCUBAPRO Luna 2.0 Wrist Dive Computer in use, demonstrating its features and readability during a dive. Duration: 0:15.
Image: A diver underwater, clearly wearing the Luna 2.0 AI dive computer on their wrist, demonstrating its practical application during a dive.
7. Manutenzjoni
7.1 Tindif u Ħażna
- After each dive, rinse the dive computer thoroughly with fresh water.
- Allow it to air dry completely before storage.
- Store the computer in its protective case in a cool, dry place away from direct sunlight.
7.2 Aġġornamenti tal-Firmware
Periodically check for firmware updates via the Bluetooth LE interface. Updates can provide new features, performance enhancements, or bug fixes. Follow the instructions provided with the update software.
8 Issolvi l-problemi
If you encounter issues with your Luna 2.0 AI, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-wiri huwa baxx jew ma jistax jinqara | Low battery, backlight setting, or environmental conditions | Check battery level. Adjust backlight intensity in settings. Ensure proper viewangolu tal-ing. |
| No air integration data | Transmitter not paired, out of range, or low transmitter battery | Verify transmitter is on and paired. Ensure proximity. Check transmitter battery. |
| Computer does not power on | Batterija eżawrita | Charge the battery or replace if necessary (refer to service center for battery replacement). |
| Kwistjonijiet ta 'konnessjoni Bluetooth | Device not in pairing mode, interference, or software issue | Ensure Bluetooth is enabled on both devices. Restart both devices. Try pairing again. |
For issues not listed here, or if solutions do not resolve the problem, contact SCUBAPRO customer support.
9. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | Luna 2.0 Air Integrated (AI) Wrist Dive Computer |
| Numru tal-Parti | 05.200.101 |
| Brand | Scubapro |
| Materjal | Plastik |
| Kulur | Blu |
| Dimensjonijiet tal-oġġett (LxWxH) | 9 x 7 x 4 pulzieri |
| Piż tal-Pakkett | 0.46 Kilogrammi |
| Utenti Suġġeriti | Unisex-adult |
| Komponenti Inklużi | Computer, Case, Silicone Arm Strap, Read First Manual |
| L-Ewwel Data Disponibbli | 6 ta’ Settembru, 2023 |
10. Garanzija u Appoġġ
10.1 Informazzjoni dwar Garanzija
The SCUBAPRO Luna 2.0 AI Wrist Scuba Dive Computer comes with a garanzija ta 'senaDin il-garanzija tkopri difetti fil-manifattura taħt użu normali. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
10.2 Appoġġ għall-Klijent
For technical assistance, warranty service, or further information, please contact SCUBAPRO customer support through their official website or authorized service centers. Do not attempt to open or repair the device yourself, as this may void the warranty.
