Monitor Personali Bluetooth NUX DA-30BT AmpManwal ta 'l-Utent aktar ħaj

Introduzzjoni

The NUX DA-30BT is a 30-watt personal monitor amplifier designed for electronic drums, keyboards, digital pianos, and synthesizers. It features Bluetooth connectivity for audio streaming and two independent input channels, allowing multiple musicians to share monitoring in various settings.

Kontenut tal-Pakkett

Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:

• NUX DA-30BT Personal Monitor Ampaktar ħaj
• Kejbil tal-Enerġija
• Input Cables (as specified by manufacturer)
• Manwal għall-Utent (dan id-dokument)

Prodott Overview

Kontrolli tal-Panew ta' Quddiem

The front panel of the DA-30BT provides all essential controls for input, tone, and power management.

Immaġni: Quddiem view of the NUX DA-30BT amplifier, showing the speaker grille, control panel with input jacks, volume knobs, bass and treble controls, auxiliary input, and power switch.

1. INPUT 1 (1/4" Jack): Main input for instruments like electronic drums or keyboards.
2. INPUT 2 (1/4" Jack): Secondary input for another instrument or audio source.
3. INPUTS Volume Controls: Independent volume knobs for INPUT 1 and INPUT 2.
4. Kontroll tal-BASS: Jaġġusta r-rispons ta 'frekwenza baxxa tal- ampaktar ħaj.
5. Kontroll tat-TREBLE: Jaġġusta r-rispons ta' frekwenza għolja tal- ampaktar ħaj.
6. DAĦLA AUXILIARI (Ġakk ta' 3.5mm): Stereo input for connecting external audio devices like smartphones or MP3 players.
7. Swiċċ POWER: Dawwar il- amplifier mixgħul jew mitfi.
8. Indikatur Bluetooth: Lights up when Bluetooth is active and paired.

Konnessjonijiet tal-Panew ta' wara

The rear panel houses the power input and important product information.

Immaġni: Wara view of the NUX DA-30BT amplifier, showing the AC power inlet, regulatory information, and serial number label.

• Dħul tal-Enerġija AC: Qabbad il-kejbil tad-dawl ipprovdut hawn.
• Numru tas-serje: Unique identifier for your unit.
• Informazzjoni Regolatorja: Compliance markings and electrical specifications.

Setup

1. Konnessjoni tal-Enerġija:

   Connect the supplied power cable to the AC Power Inlet on the rear panel of the DA-30BT and then to a suitable electrical outlet.

2. Konnessjoni tal-Istrument:

   For electronic drums, keyboards, or other instruments, connect a 1/4" instrument cable from your device's output to either the INPUT 1 or INPUT 2 jack on the front panel.

3. Auxiliary Device Connection (Optional):

   To play audio from an external device (e.g., smartphone, MP3 player), connect a 3.5mm stereo audio cable from your device's headphone output to the AUX IN jack on the front panel.
4. Tqabbil Bluetooth:

   Turn on the DA-30BT. The Bluetooth indicator will flash, indicating it's ready for pairing. On your Bluetooth-enabled device, search for "NUX DA-30BT" and select it to pair. The indicator will become solid once paired.

Istruzzjonijiet Operattivi

1. Power On/Off:

   Agħfas is-swiċċ POWER fuq il-pannell ta' quddiem biex tixgħel amplifier on or off. Ensure all volume controls are set to minimum before powering on to prevent sudden loud noises.
2. Adjusting Input Volume:

   Use the independent volume knobs for INPUT 1 and INPUT 2 to set the desired level for each connected instrument. Adjust the master volume on your instrument as needed.

3. Kontroll tat-Tone:

   Use the BASS and TREBLE controls to adjust the amplifier's tonal characteristics. Turn clockwise to increase, counter-clockwise to decrease.

4. Using Auxiliary Input:

   When an external device is connected to the AUX IN, control its volume directly from the external device. The AUX IN signal is mixed with the instrument inputs.
5. Bluetooth Audio Playback:

   Once paired, play audio from your Bluetooth device. The volume can be controlled from your device and the overall ampvolum lifier.

Manutenzjoni

• Tindif: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Ħażna: Aħżen il- amplifier f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Immaniġġjar: Evita li twaqqa' l-unità jew li tissottomettiha għal impatti qawwija.

Issolvi l-problemi

Ebda Ħsejjes tal-Ħsejjes:

• Tiżgura l- amplifier is powered on and the power indicator is lit.
• Check all cable connections (instrument, power).
• Verify instrument and amplifier volume controls are not set to minimum.
• Test with a different instrument or cable to rule out faulty equipment.

Bluetooth Mhux Konnessjoni:

• Kun żgur li l-Bluetooth huwa attivat fuq it-tagħmir tiegħek.
• Ensure the DA-30BT is in pairing mode (Bluetooth indicator flashing).
• Forget "NUX DA-30BT" from your device's Bluetooth settings and try pairing again.
• Mexxi t-tagħmir tiegħek eqreb lejn il- ampaktar ħaj.

Ħoss Mgħawġ:

• Reduce the volume on your instrument or the amplifier's input volume controls.
• Check if the BASS or TREBLE controls are set too high, causing clipping.
• Ensure cables are fully inserted and not damaged.

Speċifikazzjonijiet

Informazzjoni Importanti dwar is-Sigurtà

Please read and follow these safety instructions to prevent damage to the product or injury to yourself and others:

• Tiftaħx il- amplifier casing. Ġewwa m'hemm l-ebda partijiet li jistgħu jiġu rranġati mill-utent. Irreferi għal kull manutenzjoni għand persunal tas-servizz kwalifikat.
• Tesponix din l-unità għax-xita jew l-umdità.
• Do not place liquid-filled objects, such as vases, on the unit.
• Aċċerta ruħek li jkun hemm ventilazzjoni xierqa. Timblokkax xi fetħiet tal-ventilazzjoni.
• Uża biss il-provvista tal-enerġija speċifikata mill-manifattur.
• Ipproteġi l-korda tad-dawl milli jimxi fuqu jew maqrusa.
• Aqla 'l-unità waqt maltempati tas-sajjetti jew meta ma tintużax għal perjodi twal.

Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għan-NUX uffiċjali website or contact your local NUX distributor. Keep your purchase receipt as proof of purchase.

Official NUX Websit: www.nuxefx.com