House of Marley Stir It Up Wireless Bluetooth Turntable Instruction Manual

Introduzzjoni

Thank you for choosing the House of Marley Stir It Up Wireless Bluetooth Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure a high-quality listening experience. The Stir It Up Wireless turntable is crafted with sustainable materials such as bamboo, REGRIND Silicone, and REWIND Fabric, reflecting a commitment to eco-conscious design.

This turntable features a built-in switchable pre-amp, a replaceable Audio-Technica cartridge, and Bluetooth connectivity, allowing for versatile audio setups.

X'hemm fil-Kaxxa

Upon unboxing, please ensure all components are present and in good condition. The package typically includes:

• Stir It Up Wireless Bluetooth Turntable
• Adapter tal-Enerġija b'diversi plaggs internazzjonali
• Kejbils RCA
• Kejbil USB
• Slipmat (REGRIND Silicone)
• Kontrapiż
• Piż kontra l-iskejzjar
• Gwida Quick Start u Informazzjoni dwar Garanzija

Image: All components of the House of Marley Stir It Up Wireless Turntable, including the turntable unit, speakers, cables, and power adapters.

Setup Istruzzjonijiet

1. Installazzjoni tal-Platt u ċ-Ċinturin

1. Carefully place the aluminum platter onto the center spindle of the turntable.
2. Locate the drive belt. Gently stretch the belt around the sub-platter and hook it onto the motor pulley. Ensure the belt is not twisted.
3. Place the REGRIND Silicone slipmat on top of the platter.

2. Tonearm Balancing and Anti-Skating

1. Attach the counterweight to the rear of the tonearm. Rotate it until the tonearm is balanced and floats parallel to the platter.
2. Once balanced, hold the counterweight steady and rotate the numbered ring on the front of the counterweight to '0'.
3. Rotate the entire counterweight counter-clockwise to set the tracking force. For the included Audio-Technica cartridge, a tracking force of 1.0 gram is recommended.
4. Set the anti-skating dial to '1' or a value corresponding to your tracking force.

Immaġni: Dettaljata view of the tonearm's adjustable counterbalance and anti-skating control, crucial for proper record playback.

3. Konnessjonijiet tal-Awdjo

1. Ensure the turntable is powered off.
2. Connect the RCA cables from the 'LINE OUT' ports on the back of the turntable to your amplifier jew kelliema powered.
3. Jekk tiegħek amplifier has a dedicated 'PHONO' input, set the 'PRE-AMP' switch on the turntable to 'OFF'. If connecting to a standard 'LINE IN' or 'AUX' input, set the 'PRE-AMP' switch to 'ON'.
4. Connect the power adapter to the '15V DC IN' port on the turntable and then to a wall outlet.

Image: The rear panel of the turntable, highlighting the RCA output, the ON/OFF switch for the built-in pre-amplifier, and the 15V DC power input.

Istruzzjonijiet Operattivi

1. Daqq Rekord

1. Place a record on the slipmat.
2. Neħħi l-għatu tal-labra tal-istilus.
3. Turn the RPM dial to the correct speed (33 1/3 or 45 RPM) for your record. The platter will begin to spin.
4. Gently lift the tonearm using the lift lever.
5. Pożizzjona d-driegħ tat-tone fuq il-kanal tal-bidu mixtieq tar-rekord.
6. Niżżel bil-mod id-driegħ tat-ton billi tuża l-lieva tal-irfigħ. L-istilus jagħmel kuntatt mar-rekord, u jibda d-daqq.
7. To stop playback, lift the tonearm using the lever and return it to its rest. Turn the RPM dial to 'OFF'.

2. Tqabbil tal-Bluetooth

The Stir It Up Wireless turntable can connect wirelessly to any Bluetooth speaker or receiver.

1. Ensure your external Bluetooth device (speaker, headphones, etc.) is in pairing mode.
2. On the turntable, press the Bluetooth pairing button (located near the RPM dial). The Bluetooth indicator light will flash, indicating it is searching for devices.
3. Once connected, the Bluetooth indicator light will become solid blue.
4. Adjust the volume using the volume dial on the turntable or your connected Bluetooth device.

Immaġni: Minn fuq għal isfel view of the turntable, highlighting the Bluetooth pairing button with integrated volume dial and the front-facing headphone jack.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your turntable.

• Tindif tal-Istilus: Use a soft brush to gently clean the stylus from back to front. Avoid touching the stylus with your fingers.
• Tindif tat-Turntable: Wipe the bamboo plinth and other surfaces with a soft, dry cloth. Avoid abrasive cleaners.
• Qoxra tat-Trab: Use the provided REWIND Fabric dust cover to protect the turntable from dust when not in use.
• Sostituzzjoni tal-iskartoċċ: The Audio-Technica cartridge is replaceable. Refer to the Audio-Technica manual for specific replacement instructions if needed.

Issolvi l-problemi

Speċifikazzjonijiet

• Dimensjonijiet tal-Prodott: 13.78 x 16.54 x 4.72 pulzieri
• Piż tal-oġġett: 8.88 liri
• Numru tal-Mudell tal-Oġġett: EM-JT002-BK
• Ditta: Marley
• Veloċità ta' Rotazzjoni Massima: 45 RPM
• Karatteristika Speċjali: Bluetooth
• Materjal: Injam (Bambu)
• Stil: Wireless/Bluetooth
• Kulur: Iswed
• Apparati Kompatibbli: Headphone, Speaker

Garanzija u Appoġġ

The House of Marley Stir It Up Wireless Bluetooth Turntable comes with a 2-year guarantee, as indicated in the product features. For warranty claims, technical support, or further assistance, please refer to the contact information provided in your Quick Start Guide or visit the official House of Marley websit.