Introduzzjoni
The PATPET Shock Collar is designed to assist in training dogs weighing 10 to 120 lbs. It features a 4000ft long-range remote control, IPX7 waterproof receiver collars, and multiple training modes including beep, vibration, and static correction. This manual provides detailed instructions for the safe and effective use of your training collar system.
Informazzjoni dwar is-Sigurtà
- This device is intended for training purposes only. Do not use it for any other purpose.
- Not suitable for aggressive dogs. If your dog exhibits aggressive behavior, consult a professional trainer.
- Ensure the collar fits properly. It should be snug enough to allow the contact points to touch the dog's skin, but not so tight as to restrict breathing or cause discomfort.
- Do not leave the collar on your dog for more than 12 hours per day to prevent skin irritation.
- Regularly check your dog's neck for signs of irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.
- The static correction feature should be used responsibly and as a last resort, after attempting beep and vibration modes.
- Żomm fejn ma jintlaħaqx mit-tfal.
Kontenut tal-Pakkett
- 1 x Trasmettitur mill-bogħod
- 2 x Receiver Collars (Light Grey and Black)
- 1 x USB Iċċarġjar Cable
- 1 x Għodda tad-Dawl tat-Test
- 2 x Sets of Short Contact Points
- 2 x Sets of Long Contact Points
- 1 x User Manual (PDF link provided in product details)

Image: The complete PATPET Shock Collar set, including the remote transmitter and two receiver collars.
Prodott Overview
Trasmettitur mill-bogħod
- Buttuna tal-Beep: Emits an audible tone.
- Buttuna tal-Vibrazzjoni: Delivers a vibrational stimulus.
- Static Correction Button: Applies a static correction (shock).
- Swiċċ tal-Kanal: Allows selection between Collar 1 and Collar 2.
- Intensity Adjustment Buttons: Adjusts the level of static correction (1-16 levels).
- Wirja Diġitali: Shows selected collar channel and intensity level.
Kullar Riċevitur
- Punti ta' Kuntatt: Deliver static correction. Choose appropriate length for your dog's coat.
- Buttuna tal-Qawwa: Turns the receiver collar on/off.
- Port tal-Iċċarġjar: For recharging the collar battery.
- Ċinga aġġustabbli: Jiżgura li joqgħod komdu u sigur.

Immaġni: Close-up view of the remote transmitter and receiver collars, highlighting their design.
Iċċarġjar tal-Mezzi
The remote transmitter and receiver collars are rechargeable. Use the provided USB charging cable to charge all devices simultaneously.
- Connect the charging cable to the charging ports on the remote and each collar.
- Plug the USB end of the cable into a USB power adapter (not included) or a computer USB port.
- The devices will indicate charging status (e.g., LED light). A full charge typically takes 2 hours.
- Disconnect the devices once fully charged to preserve battery life.

Image: The remote and collars connected to the USB charging cable.
Setup
1. Tixgħel/Jitfi
- To turn on the remote: Press and hold the power button on the side until the display lights up.
- To turn on the collar: Press and hold the power button on the receiver until the LED light flashes.
- To turn off: Repeat the process for both devices.
2. Pairing the Remote and Collars
The devices usually come pre-paired. If re-pairing is needed:
- Ensure both the remote and collar are turned off.
- Press and hold the power button on the collar until the LED light flashes rapidly.
- While the collar LED is flashing, press any training button (Beep, Vibration, or Static) on the remote.
- The collar's LED will stop flashing, indicating successful pairing. Repeat for the second collar on a different channel.
3. Twaħħil tal-Għonq
Proper fit is crucial for effectiveness and comfort.
- Place the receiver on the dog's neck so that the contact points are underneath, touching the skin.
- The collar should be snug enough that two fingers can barely fit between the strap and your dog's neck.
- Aqta’ kwalunkwe tul żejjed taċ-ċinga jekk meħtieġ.
- For long-haired dogs, use the longer contact points to ensure proper skin contact.

Image: Demonstrates the correct placement and fit of the receiver collar on a dog's neck.
Modi Operattivi
The remote offers three distinct training modes:
- Modalità Beep: Provides an audible warning. Often used as a preliminary correction before vibration or static.
- Modalità ta' Vibrazzjoni: Delivers a non-harmful vibration. Effective for getting your dog's attention or as a stronger warning.
- Static Correction Mode: Applies a static stimulus. Use at the lowest effective level. The intensity can be adjusted from 1 to 16.

Image: The remote's interface showing the dedicated buttons for Beep, Vibration, and Static Correction modes.
Switching Channels (for 2 Dogs)
The remote can control two separate collars by switching between Channel 1 and Channel 2.
- Locate the channel switch on the side of the remote transmitter.
- Slide the switch to select either Channel 1 (often indicated by orange) or Channel 2 (often indicated by green) to control the corresponding collar.
Video: Demonstrates how to switch between Channel 1 and Channel 2 on the remote to control different collars.
Funzjonalità tal-Ittestjar
To ensure the static correction is working correctly, use the provided test light tool.
- Place the test light tool over the contact points of the receiver collar.
- Press the Static Correction button on the remote.
- The test light should illuminate, indicating the static correction is functioning.
Video: Shows how to use the test light tool to verify the static correction function of the collar.
Manutenzjoni
- Naddaf regolarment il-kullar tar-riċevitur u l-punti ta' kuntatt b'adamp drapp.
- Ensure the collar is completely dry before storing or recharging.
- Inspect the collar for any damage or wear and tear. Replace if necessary.
- Aħżen l-apparat f'post frisk u niexef meta ma jkunx qed jintuża.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-kullar mhux qed jirrispondi għall-kontroll remot | Low battery; Not paired; Out of range | Charge devices; Re-pair devices; Move closer to dog |
| Static correction not working | Poor contact with skin; Low battery; Test light not used correctly | Adjust collar fit; Charge collar; Use test light as instructed |
| Dog shows signs of irritation | Collar too tight; Left on too long; Allergic reaction | Loosen collar; Reduce wear time; Consult vet if persists |
Speċifikazzjonijiet
- Ditta: PATPET
- Mudell: B0BFR64Z2M
- Piż tal-oġġett: 1.01 liri
- Manifattur: Shenzhen Patpet Technology Co., Ltd.
- Pajjiż ta' Oriġini: Iċ-Ċina
- Batteriji: 3 batteriji tal-jone tal-litju meħtieġa (inklużi)
- Dimensjonijiet tal-Pakkett tal-Oġġett L x W x H: 6.06 x 5.87 x 2.56 pulzieri
- Dimensjonijiet tal-oġġett LxWxH: 13 x 18 x 0.1 pulzieri
- Udjenza fil-mira: Small-animal-pets, dog
- Kulur: Griż ċar
- Daqs: 2 Collars
- Materjal: Poliuretejn termoplastiku
- Deskrizzjoni tal-firxa ta' l-età: Il-ħajja kollha stages
- Istruzzjonijiet għall-Kura: Wipe collar clean and ensure it is dry before storing.
- Numru ta' Oġġetti: 2
- Rakkomandazzjoni tar-Razza: Daqsijiet kollha tar-Razza
- Komponenti Inklużi: 2 Dog Collars
- Tip ta 'għeluq: Buttuna
Garanzija u Appoġġ
For warranty information or technical support, please refer to the official PATPET website or contact their customer service directly. The full user manual in PDF format is available via the link provided in the product details on Amazon.

Image: PATPET customer support is available to assist with any product inquiries.





