1. Introduzzjoni
Thank you for choosing the Onforu 65W LED Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Two Onforu 65W LED Motion Sensor Outdoor Flood Lights.
2. Informazzjoni Importanti dwar is-Sigurtà
TWISSIJA: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances. Always turn off power at the circuit breaker before installation or servicing.
- Do not connect to a dimmer switch.
- Ensure the power supply is 120V AC, 60Hz.
- Tippruvax tiżżarma jew timmodifika l-apparat.
- Żomm materjali fjammabbli 'l bogħod mill-apparat tad-dawl.
- Suitable for wet locations. Ensure all connections are properly sealed.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra qabel ma tipproċedi bl-installazzjoni.
- Onforu 65W LED Motion Sensor Outdoor Flood Light (2 units)
- Bracket tal-Immuntar
- Gasket tal-Gomma
- Wajer Ġewż
- Viti tal-Immuntar
- Manwal ta' Istruzzjoni
4. Karatteristiċi tal-prodott
- High Brightness & Energy Efficiency: 6500 Lumens output from 65W LED, equivalent to 450W traditional bulbs.
- Disinn aġġustabbli: Three adjustable heads provide a 270-degree detection zone for wide coverage.
- Sensorju tal-Mozzjoni Mtejjeb: 180-degree sensing angle, detecting motion up to 72 feet away. Adjustable lighting time from 10 seconds to 7 minutes.
- Durabbli u Reżistenti għat-Temp: IP65 waterproof and dust-proof rating, made of die-cast aluminum for excellent heat dissipation and long lifespan.
- Temperatura tal-Kulur: 6500K Daylight White for clear, bright illumination.
Image 4.1: Key features of the Onforu LED Motion Sensor Outdoor Flood Light.
Image 4.2: Aluminum construction for efficient heat dissipation.
5. Gwida għall-Installazzjoni
Qabel ma tibda: Ensure power is OFF at the circuit breaker. Recommended installation height is 8.2-16.4 feet (2.5-5 meters).
5.1 Għażliet ta 'Immuntar
The fixture can be mounted on a wall or soffit.
Image 5.1: Soffit Mounted vs. Wall Mounted installation examples.
5.2 Istruzzjonijiet tal-Wiring
- Itfi l-enerġija mill-circuit breaker prinċipali.
- Waħħal il-parentesi tal-immuntar mal-kaxxa tal-junction billi tuża l-viti pprovduti.
- Qabbad il-wajers:
- Black (L): Connect to the live wire from the power supply.
- White (N): Connect to the neutral wire from the power supply.
- Green (GND): Connect to the ground wire from the power supply.
- Ensure the rubber gasket is properly seated between the fixture and the mounting surface to maintain IP65 rating.
- Waħħal l-apparat tad-dawl mal-bracket tal-immuntar.
- Adjust the light heads to the desired angles.
- Irrestawra l-enerġija fis-circuit breaker.
Image 5.2: Wiring diagram and product dimensions.
Immaġni 5.3: Gwida viżwali għall-passi tal-installazzjoni.
6. Istruzzjonijiet Operattivi
The motion sensor has three adjustable knobs for customization:
- SENS (Sensittività): Adjusts the detection distance. Turn towards '-' for lower sensitivity (up to 10m) or '+' for higher sensitivity (up to 22m/72ft).
- LUX (Ambient Light): Determines when the sensor activates. Turn towards the moon icon for activation only at night (less than 10 LUX). Turn towards the sun icon for activation during both day and night.
- TIME (Time Delay): Sets how long the light stays on after motion is detected. Adjustable from 10 seconds to 7 minutes. Turn towards '-' for shorter duration or '+' for longer duration.
Image 6.1: Motion sensor adjustment knobs for LUX, SENS, and TIME.
7. Manutenzjoni
- Clean the fixture regularly with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
- Periodically check electrical connections for tightness and signs of wear.
- Ensure the motion sensor lens is clear of dirt, dust, or obstructions for optimal performance.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power; incorrect wiring; LUX setting too low. | Check circuit breaker; verify wiring connections; adjust LUX setting towards 'sun' icon. |
| Id-dawl jibqa' mixgħul kontinwament. | Continuous motion detected; TIME setting too long; wiring issue. | Ensure no constant motion in detection area; adjust TIME setting to shorter duration; check wiring (live and neutral might be reversed). |
| Is-senser tal-moviment mhux qed jiskopri. | SENS setting too low; obstructions; incorrect mounting height. | Adjust SENS setting towards '+'; clear obstructions from sensor view; verify mounting height is within recommended range. |
| Teptip ħafif. | Loose wiring connection; unstable power supply. | Check and tighten all wiring connections; consult an electrician for power supply issues. |
9. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Onforu |
| Numru tal-Mudell | BDB55G-3 |
| Wattage | 65 Watts |
| Luminożità | 6500 Lumens |
| Temperatura tal-Kulur | 6500 Kelvin (Daylight White) |
| Angolu tas-Sensor tal-Mozzjoni | 180° |
| Distanza ta' Sejbien tal-Moviment | Sa 72 pied |
| Aġġustament tad-Dewmien tal-Ħin | 10 sekonda sa 7 minuta |
| Livell ta 'Reżistenza għall-Ilma | IP65 Waterproof |
| Materjal | Metal (Die-cast Aluminum) |
| Voltage | 120 Volts |
| Dimensjonijiet tal-Prodott | 10.7"T x 5.8"W x 4.7"Għ |
| Numru ta' Sorsi tad-Dawl | 3 (Adjustable Heads) |
| Tip ta' Installazzjoni | Mount Wall |
10. Garanzija u Appoġġ
This Onforu product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided with your purchase or contact Onforu customer support.
For technical support, troubleshooting assistance, or any inquiries, please contact Onforu customer service through the retailer's platform or visit the official Onforu websit.
