1. Prodott Aktarview
The Pokitter PKT-PTC1200 is a compact and efficient ceramic fan heater designed to provide rapid and comfortable warmth. Featuring advanced PTC ceramic heating technology, it offers energy-saving operation, multiple safety features, and a quiet, light-free heating experience. Its portable design makes it suitable for various indoor environments.
Figure 1.1: The Pokitter PKT-PTC1200 ceramic heater in operation, demonstrating its wide oscillation and warm air output.
2. Informazzjoni dwar is-Sigurtà
Jekk jogħġbok aqra l-istruzzjonijiet kollha tas-sigurtà bir-reqqa qabel ma tuża dan l-apparat. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment serju.
- Dejjem poġġi l-ħiter fuq wiċċ sod u livellat.
- Do not cover the heater or block the air inlets/outlets.
- Żomm materjali fjammabbli mill-inqas metru (3 piedi) 'il bogħod mill-ħiter.
- Do not use in bathrooms, laundry areas, or similar wet locations.
- Aqla’ l-heater mill-plagg meta ma jkunx qed jintuża jew qabel ma tnaddaf.
- This appliance is equipped with an automatic tip-over switch and overheat protection for enhanced safety.
Figure 2.1: Key safety features of the PKT-PTC1200 heater, including rapid heat dissipation, automatic tip-over shut-off, overheat protection, and the use of flame-retardant ABS material.
3. Setup
Setting up your Pokitter ceramic heater is quick and easy.
- Ippakkja: Neħħi l-ħiter mill-imballaġġ tiegħu bir-reqqa. Żomm l-imballaġġ għal ħażna jew trasport fil-futur.
- Pjazzament: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and prevent overheating.
- Konnessjoni tal-Enerġija: Ipplaggja l-korda tal-enerġija f'sokit elettriku standard. Kun żgur li l-volumtage matches the heater's requirements (refer to specifications).
Figure 3.1: The heater and its packaging, ready for setup.
4. Istruzzjonijiet Operattivi
The Pokitter PKT-PTC1200 heater features intuitive controls for ease of use.
4.1 Power On/Off
Press the power button on the top panel to turn the heater on or off. The heater will begin operating in the last used mode or default to a low heat setting.
Figure 4.1: Operating the control panel on the top of the heater.
4.2 Issettjar tas-Sħana
The heater offers three heat settings:
- Fan Only (7W): Jiċċirkola l-arja mingħajr sħana.
- Sħana Baxxa (700W): Provides gentle warmth for smaller spaces or energy saving.
- Sħana Għolja (1200W): Delivers maximum warmth for quick heating of larger areas.
Cycle through the settings using the mode button on the control panel.
Figure 4.2: The heater's three power modes and 80-degree oscillation feature.
4.3 Funzjoni ta' Oxxillazzjoni
Press the oscillation button to activate the 80-degree wide-angle oscillation, distributing heat more evenly across the room. Press again to stop oscillation.
Figure 4.3: The heater's oscillation feature in action.
4.4 Funzjoni Timer
The built-in 12-hour timer allows you to set the heater to automatically turn off after a specified period. Press the timer button repeatedly to select the desired duration.
Figure 4.4: The 12-hour timer function for convenient operation.
5. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-ħiter tiegħek.
- Tindif: Before cleaning, always unplug the heater and allow it to cool down completely. Use a soft, damp drapp biex timsaħ l-uċuħ ta’ barra. Tużax prodotti tat-tindif jew solventi li joborxu.
- Ħażna: Meta ma tkunx qed tuża l-ħiter, aħżenh f'post frisk u niexef, preferibbilment fl-imballaġġ oriġinali tiegħu, biex tipproteġih mit-trab u l-ħsara.
- Dħul/Ħruġ tal-Arja: Periodically check and clean the air inlets and outlets to ensure they are free from dust and debris, which can impede airflow and reduce efficiency.
6 Issolvi l-problemi
Jekk tiltaqa' ma' problemi bil-heater tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-heater ma jixgħelx. | No power, tip-over switch activated, or overheat protection activated. | Check power cord connection. Ensure heater is upright. Unplug and allow to cool for 30 minutes before restarting. |
| Ebda output tas-sħana. | Fan-only mode selected, or heating element issue. | Ensure a heat mode (700W or 1200W) is selected. If problem persists, contact customer support. |
| Il-ħiter jieqaf ħesrem. | Overheat protection or tip-over switch activated. | Check for obstructions around the heater. Ensure it is on a stable surface. Allow to cool down. |
| Storbju mhux tas-soltu. | Dust buildup or internal component issue. | Clean air inlets/outlets. If noise persists, discontinue use and contact customer support. |
If the problem is not listed or persists after attempting the solutions, please contact Pokitter customer support.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | PKT-PTC1200 |
| Brand | Pokitter |
| Output ta 'Qawwa | 7W (Fan), 700W (Low Heat), 1200W (High Heat) |
| Angolu ta 'Oxxillazzjoni | 80° |
| Timer | Sa 12 sigħat |
| Karatteristiċi tas-Sigurtà | Overheat Protection, Tip-over Auto-Off (30°), Flame-retardant ABS material |
| Dimensjonijiet (L x W x H) | Madwar 21 x 21 x 45 ċm (8.3 x 8.3 x 17.7 pulzieri) |
| Piż | Madwar 2.25 kg (4.96 lbs) |
| Kulur | Abjad |
8. Garanzija u Appoġġ
Pokitter products are designed for reliability and performance. For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Pokitter website. Please have your model number (PKT-PTC1200) and purchase date ready when contacting support.
Għal aktar għajnuna, tista' tirreferi wkoll għall- Pokitter Brand Store on Amazon.
