GRAUGEAR G-PS5HS02

GRAUGEAR M.2 2280 NVMe SATA SSD Heatsink

Model: G-PS5HS02

Manwal ta' Istruzzjoni

1. Prodott Aktarview

The GRAUGEAR G-PS5HS02 is an aluminum alloy heatsink designed to enhance the thermal performance of M.2 2280 NVMe and SATA SSDs. It is compatible with both PlayStation 5 consoles and personal computers, effectively reducing SSD operating temperatures by up to 20°C. This helps maintain optimal performance and prolong the lifespan of your SSD.

GRAUGEAR M.2 2280 NVMe SATA SSD Heatsink installed in a PlayStation 5

Image 1.1: The GRAUGEAR G-PS5HS02 heatsink installed in a PlayStation 5 console, demonstrating its compact and effective design for memory expansion.

2. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti fil-pakkett:

  • 1 x GRAUGEAR G-PS5HS02 Heatsink
  • 2 x Silicone Thermal Pads
  • 1 x SSD Mounting Screw
  • 1 x tornavit
  • 1 x Manwal għall-Utent
  • 1 x Karta ta' Garanzija
Contents of the GRAUGEAR G-PS5HS02 heatsink package including heatsink, thermal pads, screwdriver, and screws.

Image 2.1: All items included in the GRAUGEAR G-PS5HS02 heatsink kit, laid out for inspection.

3. Setup u Installazzjoni

Follow these steps to install the GRAUGEAR G-PS5HS02 heatsink onto your M.2 2280 SSD:

  1. Ipprepara l-SSD: Carefully remove any existing labels or stickers from your M.2 2280 SSD to ensure proper contact with the thermal pads.
  2. Apply Thermal Pads: Peel off the protective films from both sides of the two silicone thermal pads. Place one thermal pad on the top surface of the SSD and the other on the bottom surface. Ensure they cover the main components of the SSD.
  3. Waħħal is-Sink tas-Sħana: Gently place the GRAUGEAR heatsink onto the SSD, aligning it so that the thermal pads make full contact with both the SSD and the heatsink. The heatsink is designed with an aluminum groove structure for optimal heat transfer.
  4. Assigura l-Assemblea: Insert the SSD with the attached heatsink into the M.2 slot of your PlayStation 5 or PC motherboard. Use the provided SSD mounting screw and screwdriver to secure the SSD in place.
Sploda view of the GRAUGEAR heatsink, thermal pads, M.2 SSD, and stainless steel bracket

Image 3.1: Exploded diagram showing the assembly order of the heatsink, thermal pads, and M.2 SSD.

Diagram illustrating the easy installation of the GRAUGEAR heatsink into an M.2 slot, showing alignment with the screw hole.

Image 3.2: Visual guide for installing the heatsink and SSD into the designated slot, highlighting the precise fit.

Gwida tal-Vidjow tal-Installazzjoni

Video 3.1: An official GRAUGEAR video demonstrating the step-by-step installation process of the M.2 SSD heatsink.

4. Prinċipji Operattivi

The GRAUGEAR G-PS5HS02 heatsink operates passively, utilizing its aluminum alloy plate-fin design to maximize surface area for heat dissipation. Heat generated by the M.2 SSD is transferred through the thermal pads to the heatsink, which then releases the heat into the surrounding air. This process effectively lowers the SSD's operating temperature, preventing thermal throttling and ensuring consistent high performance.

Comparison showing an M.2 SSD without a heatsink running at higher temperatures (red) versus with the GRAUGEAR heatsink running cooler (blue).

Image 4.1: Visual representation of temperature reduction with the GRAUGEAR heatsink, illustrating improved cooling efficiency.

Diagram showing airflow over the aluminum groove design of the GRAUGEAR heatsink, indicating efficient heat dissipation.

Image 4.2: Illustration of the aluminum groove design facilitating airflow and heat transfer away from the M.2 SSD.

5. Manutenzjoni

The GRAUGEAR G-PS5HS02 heatsink requires minimal maintenance. Periodically, inspect the heatsink for dust accumulation. If dust is present, gently clean it using a soft brush or compressed air to ensure optimal airflow and heat dissipation. Avoid using liquid cleaners directly on the heatsink or SSD.

6 Issolvi l-problemi

If you experience issues after installing the heatsink, consider the following:

  • SSD Mhux Individwat: Ensure the M.2 SSD is fully seated in its slot and the mounting screw is securely fastened.
  • Tħassib dwar is-sħana żejda: Verify that the thermal pads are correctly applied and making full contact with both the SSD and the heatsink. Ensure there is adequate airflow within your system's chassis or PlayStation 5.
  • Ħsara Fiżika: Inspect the heatsink and SSD for any visible damage. If damage is found, contact customer support.

7. Speċifikazzjonijiet

KaratteristikaDettall
BrandGRAUGEAR
Numru tal-MudellG-PS5HS02
MaterjalLiga tal-Aluminju
KompatibilitàM.2 2280 NVMe/SATA SSDs, PlayStation 5, PC
Dimensjonijiet (L x W x H)2.87" x 0.91" x 0.39" (73mm x 23mm x 10mm)
Piż tal-oġġett23 Gramm
Tip ta 'ImmuntarMuntaġġ tax-chassis

8. Garanzija u Appoġġ

GRAUGEAR products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the included Guarantee Card or visit the official GRAUGEAR websit: www.graugear.de.

Dokumenti Relatati - G-PS5HS02

Preview GRAUGEAR G-M2HS08-F Heat Pipe Cooler għal M.2 2280 SSD - Gwida għall-Installazzjoni u s-Sigurtà
Gwida komprensiva għall-GRAUGEAR G-M2HS08-F Heat Pipe Cooler, li tiddeskrivi l-kontenut tal-pakkett, il-karatteristiċi, l-ispeċifikazzjonijiet, il-passi tal-installazzjoni, u informazzjoni essenzjali dwar is-sigurtà għall-SSDs M.2 2280.
Preview GRAUGEAR Heat Pipe Cooler for PS5 Slim & PS5 Pro: Installation Guide
Comprehensive guide to installing the GRAUGEAR Heat Pipe Cooler (G-PS5HS05+) for PlayStation 5 Slim and PS5 Pro consoles to enhance M.2 NVMe SSD cooling.
Preview GrauGear G-M2HS07-GC Heat Pipe Cooler for M.2 SSD Installation Guide
Comprehensive guide for installing the GrauGear G-M2HS07-GC Heat Pipe Cooler on M.2 NVMe SSDs for PlayStation 5 and Desktop Computers, including features, specifications, and safety information.
Preview GRAUGEAR G-M2HS03-F Cooler tal-Pajp tas-Sħana għal M.2 2280 SSD
Ittejjeb il-prestazzjoni u l-lonġevità tal-M.2 2280 SSD tiegħek bil-GRAUGEAR G-M2HS03-F Heat Pipe Cooler. Din il-gwida tipprovdi passi ta' installazzjoni, karatteristiċi ewlenin, speċifikazzjonijiet, u informazzjoni essenzjali dwar is-sigurtà għal tkessiħ ottimali tal-SSD tiegħek.
Preview GrauGear G-M2ST235-CL Clone Station: User Manual and Guide
User manual for the GrauGear G-M2ST235-CL Clone Station, detailing its features for bidirectional cloning of M.2 NVMe/NGFF SSDs and SATA 2.5"/3.5" SSDs/HDDs, and its use as a docking station. Includes specifications and safety information.
Preview Gwida għall-Installazzjoni u s-Sigurtà tal-GRAUGEAR M.2 2280 SSD Heat Pipe Cooler
Gwida komprensiva għall-GRAUGEAR M.2 2280 SSD Heat Pipe Cooler, li tkopri l-kontenut tal-pakkett, il-karatteristiċi, l-ispeċifikazzjonijiet, il-passi tal-installazzjoni, u informazzjoni essenzjali dwar is-sigurtà.