Introduzzjoni
This instruction manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Crown Schnor 2 Battery 16V Cordless Drill (Model CT21082H-2). Please read this manual thoroughly before using the tool and keep it for future reference.
The Crown Schnor 2 is a versatile cordless drill designed for various drilling and screwdriving tasks. It features a 16V Lithium-ion battery, a 10mm chuck, and adjustable torque settings for optimal performance.
Istruzzjonijiet Ġenerali dwar is-Sigurtà
Dejjem segwi l-prekawzjonijiet bażiċi ta' sigurtà biex tnaqqas ir-riskju ta' nar, xokk elettriku, u korriment personali meta tħaddem għodod tal-enerġija.
- Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
- Sigurtà Elettrika: Evita kuntatt tal-ġisem ma' uċuħ ertjati jew ertjati bħal pajpijiet, radjaturi, fuklari, u refriġeraturi. Tesponix għodod tal-elettriku għax-xita jew għal kundizzjonijiet imxarrbin.
- Sigurtà Personali: Dejjem ilbes protezzjoni għall-għajnejn. Uża tagħmir ta’ sigurtà xieraq bħal maskri tat-trab, żraben tas-sigurtà li ma jiżolqux, elmi protettivi, jew protezzjoni għas-smigħ meta jkun meħtieġ. Ilbes sew; evita ħwejjeġ jew ġojjelli laxki.
- Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Skonnettja l-pakkett tal-batterija mill-għodda tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.
- Użu u Kura tal-Pakkett tal-Batterija: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. When the battery pack is not in use, keep it away from other metal objects.
Kontenut tal-Pakkett
Iftaħ il-kontenut bir-reqqa u kun żgur li l-oġġetti kollha huma preżenti u mhux imħassra. Jekk xi oġġetti huma neqsin jew imħassra, ikkuntattja lill-bejjiegħ tiegħek.
- Crown Schnor 2 Cordless Drill (CT21082H-2)
- 16V Lithium-ion Battery (2 Ah) - Quantity: 2
- Ċarġer tal-batterija
- Kawża tal-Ġarr tal-plastik
- Manwal għall-Utent
- Assorted Drill Bits/Accessories (may vary)
Prodott Overview
Familiarize yourself with the components of your cordless drill before operation.
- Chuck: Holds drill bits or screwdriver bits.
- Ċirku tal-Aġġustament tat-Torque: Jagħżel l-issettjar tat-torque mixtieq għall-modalità ta' invitar jew tħaffir.
- Swiċċ tas-Selettur tal-Veloċità: Changes between high and low-speed gears.
- Swiċċ 'il Quddiem/Lura: Jikkontrolla d-direzzjoni tar-rotazzjoni.
- Trigger Switch: Activates the drill and controls speed (variable speed).
- Dawl tax-Xogħol LED: Iddawwal iż-żona tax-xogħol.
- Pakkett tal-batterija: Jipprovdi l-enerġija lill-għodda.
- Buttuni tar-Rilaxx tal-Batterija: Użat biex jitneħħa l-pakkett tal-batterija.
- Clip taċ-ċinturin: For convenient carrying (if included).
Setup
1. Iċċarġjar tal-Batterija
Il-pakkett tal-batterija mhux iċċarġjat kompletament fil-ħin tax-xiri. Huwa rakkomandat li l-batterija tiċċarġja kompletament qabel l-ewwel użu.
- Qabbad il-ċarġer ma' sokit standard tal-enerġija.
- Żerżaq il-pakkett tal-batterija fuq il-ċarġer sakemm tikklikkja f'postu.
- Id-dawl indikatur tal-iċċarġjar fuq il-ċarġer juri l-istatus tal-iċċarġjar. Irreferi għall-istruzzjonijiet speċifiċi tal-ċarġer għall-indikazzjonijiet tad-dawl.
- Ċarġ sħiħ tipikament jieħu madwar 60 minuta.
- Once charged, disconnect the charger from the power outlet and remove the battery pack.
2. Installazzjoni u Tneħħija tal-batterija
- Installazzjoni: Align the battery pack with the base of the drill handle and slide it in until it clicks securely into place. Ensure it is fully seated.
- Tneħħija: Press the battery release buttons on both sides of the battery pack and slide the battery out of the drill handle.
3. Installazzjoni u Tneħħija ta' Bits/Aċċessorji tat-Tħaffir
- Biex Tinstalla: Rotate the chuck counter-clockwise to open the jaws. Insert the drill bit or accessory fully into the chuck. Rotate the chuck clockwise to tighten the jaws securely around the bit. Hand-tighten firmly.
- Biex tneħħi: Dawwar iċ-chuck kontra l-arloġġ biex ittaffi x-xedaq u iġbed il-bit 'il barra.
Nota: Always ensure the drill bit or accessory is centered and securely tightened to prevent slippage and potential injury.
Istruzzjonijiet Operattivi
1. Ixgħel/Itfi u Kontroll tal-Veloċità
- Biex Tixgħel: Press the trigger switch. The LED work light will illuminate.
- Biex Tintefa: Erħi l-iswiċċ tal-grillu.
- Veloċità Varjabbli: The speed of the drill is controlled by how far the trigger switch is pressed. Pressing it further increases the speed.
2. Rotazzjoni 'l Quddiem/Lura
- Push the forward/reverse switch to the left for forward (clockwise) rotation, used for drilling and tightening screws.
- Push the forward/reverse switch to the right for reverse (counter-clockwise) rotation, used for removing screws or freeing a jammed drill bit.
- Meta s-swiċċ ikun fil-pożizzjoni taċ-ċentru, il-grillu jkun imsakkar, u b'hekk jipprevjeni l-istartjar aċċidentali.
3. Torque Adjustment and Mode Selection
The torque adjustment ring allows you to select the appropriate torque setting for screwdriving or switch to drilling mode.
- Tornavit: Rotate the torque adjustment ring to a numbered setting (e.g., 1-20). Lower numbers are for smaller screws or softer materials, higher numbers for larger screws or harder materials. The clutch will disengage when the set torque is reached, preventing overtightening or stripping.
- Tħaffir: Rotate the torque adjustment ring to the drill symbol. This bypasses the clutch, providing maximum torque for drilling applications.
4. Speed Gear Selection
Use the speed selector switch located on top of the drill to choose between two gear settings:
- Ger 1 (Veloċità Baxxa): For high torque applications like driving large screws or drilling large holes in hard materials. (0-380 min⁻¹)
- Ger 2 (Veloċità Għolja): For faster drilling in softer materials or smaller holes. (0-1250 min⁻¹)
Attenzjoni: Do not change the speed gear while the drill is running.
Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-għodda tiegħek.
1. Tindif
- Dejjem skonnettja l-pakkett tal-batterija qabel ma tnaddaf.
- Żomm il-fetħiet tal-ventilazzjoni tal-għodda nodfa biex tevita li tissaħħan iżżejjed.
- Uża artab, damp drapp biex timsaħ il-barra tal-għodda. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Naddaf il-ponot taċ-chuck regolarment biex tiżgura qabda xierqa fuq il-bits.
2. Ħażna
- Aħżen l-għodda u l-pakkett tal-batterija f'post frisk u niexef, 'il bogħod mix-xemx diretta u mill-umdità.
- Store the tool in its plastic carrying case to protect it from dust and damage.
- Ensure the battery pack is partially charged (around 50%) before long-term storage.
3. Kura tal-batterija
- Do not store battery packs in temperatures above 50°C (122°F) or below -20°C ( -4°F).
- Evita li tiċċarġja l-pakkett tal-batterija kompletament ta' spiss, għax dan jista' jnaqqas il-ħajja tagħha.
- Jekk il-pakkett tal-batterija jisħon waqt l-użu, ħallih jiksaħ qabel ma terġa' tiċċarġjah.
Issolvi l-problemi
This section addresses common issues you might encounter with your cordless drill.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-trapan ma jibdax. | Batterija mhux iċċarġjata jew installata ħażin. Is-swiċċ 'il quddiem/lura fil-pożizzjoni ċentrali (imsakkra). | Charge battery. Ensure battery is fully inserted. Move forward/reverse switch to either forward or reverse position. |
| Telf ta' enerġija waqt it-tħaddim. | Battery charge is low. Overload condition. | Recharge battery. Reduce pressure on the tool or use a lower speed/higher torque setting. |
| Il-bit jiżloq fil-mandrin. | Mandrin mhux issikkat biżżejjed. Ix-xkub tal-bit huwa maħmuġ jew bil-ħsara. | Tighten chuck firmly by hand. Clean or replace the bit. |
| Drill overheats. | Użu kontinwu u tqil. Slottijiet tal-ventilazzjoni mblukkati. | Allow the tool to cool down. Clear any obstructions from ventilation slots. Avoid prolonged heavy use. |
Speċifikazzjonijiet
Technical data for the Crown Schnor 2 Battery 16V Cordless Drill (CT21082H-2).
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | CT21082H-2 |
| Tip ta 'batterija | Lithium-ion |
| Rated Power (Max Voltage) | 16V |
| Vol nominalitage | 14.4V |
| Kapaċità tal-batterija | 2 Ah |
| Ħin tal-Iċċarġjar tal-Batterija | Appross. 60 minuti |
| Veloċità mingħajr tagħbija (l-1 ger) | 0-380 min⁻¹ |
| Veloċità mingħajr tagħbija (it-2 ger) | 0-1250 min⁻¹ |
| Kapaċità Chuck | 0.8-10 mm |
| Max. Torque (Soft/Solid) | 21 Nm / 35 Nm |
| Dijametru Massimu tat-Tħaffir (Injam) | 32 mm |
| Max. Drilling Diameter (Steel) | 10 mm |
| Max. Dijametru tal-Invita | 7 mm |
| Weight (Tool with Battery) | 1.24 kg |
| Materjal | Plastik |
| Kulur | Black / Grey / Red |
| Karatteristiċi Speċjali | Cordless, LED Work Light |
Garanzija u Appoġġ
For warranty information, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
Għażliet ta' garanzija estiża jistgħu jkunu disponibbli minn fornituri ta' partijiet terzi. Pereżempjuample, 1-Year and 2-Year Extended Warranties by Salama Care are offered for this product. Please check with your retailer for details on available protection plans.
For technical support or service inquiries, please visit the official Crown website or contact their customer service department. You can often find contact information on the product packaging or the manufacturer's websit.
Manifattur: Kuruna
Numru tal-Mudell: CT21082H-2
