EJEAS MS8 Motorcycle Helmet Bluetooth Intercom User Manual

1. Introduzzjoni

The EJEAS MS8 is an advanced motorcycle helmet Bluetooth intercom system designed for seamless group communication. Featuring new Mesh technology, Bluetooth 5.1, and CVC noise reduction, it provides stable and clear communication for up to 8 riders. This manual will guide you through the installation, operation, and maintenance of your MS8 intercom system.

Figure 1: EJEAS MS8 Mesh Intercom Units

2. X'hemm fil-Kaxxa

Jekk jogħġbok iċċekkja l-kontenut tal-pakkett tiegħek biex tiżgura li l-oġġetti kollha huma preżenti:

• 2* MS8 Mesh Intercom Units
• 2* Ear Speaker and Two Microphone Sets
• 2* Accessory Post and Accessory Clip Sets
• 2* Type-C Charging Cables
• 1* Manwal għall-Utent

Figura 2: Kontenut tal-Pakkett

3. Karatteristiċi tal-prodott

• 3.1. 8-Rider Mesh Intercom

  The MS8 utilizes new Mesh technology, allowing up to 8 riders to communicate simultaneously. The maximum connection distance for two units is 1.8 KM, extending to approximately 3.5-7 KM for an 8-person group. The system automatically disconnects or reconnects when riders move in or out of the effective range, ensuring continuous communication.

  

  Figure 3: 8-Rider Mesh Intercom Network

  

  Figure 4: Extended Communication Range

• 3.2. Qualcomm Bluetooth 5.1

  Equipped with an optimized Qualcomm Bluetooth 5.1 chip, the MS8 offers faster data transmission speeds and a longer, more stable, and reliable connection distance for your communication needs.

  

  Figura 5: Teknoloġija Bluetooth 5.1

• 3.3. CVC Noise Reduction Technology

  The MS8 incorporates advanced CVC (Clear Voice Capture) noise reduction technology to effectively eliminate echo and ambient noise during calls, ensuring crystal clear audio quality even at high speeds.

• 3.4. 1200mAh Large Battery

  A high-capacity 1200mAh rechargeable battery provides extended standby and usage times. The Type-C adapter design supports simultaneous charging and operation, ideal for long rides.

• 3.5. Multiple Functions

  The MS8 includes an FM radio for listening to music and road conditions. It boasts an IP67 waterproof rating, allowing use in rainy conditions. It is compatible with mobile phones, MP3 players, older EJEAS intercom models, and other Bluetooth devices. Features include auto-receiving calls, last phone number redial, voice assistant, and microphone mute function.

  

  Figure 6: Intercom and Music Simultaneously

  

  Figura 7: Karatteristiċi Ewlenin Aktar minnview (Battery, Installation, Controls, Sound)

4. Setup u Installazzjoni

Proper installation ensures optimal performance and comfort. The MS8 is designed to be compatible with most helmet types.

4.1. Immuntar tal-Unità tal-Intercom

There are typically two methods for mounting the MS8 unit to your helmet: a clip mount or an adhesive mount. Choose the method that best suits your helmet and preference.

4.2. Installazzjoni tal-Ispeakers u l-Mikrofonu

Place the speakers inside the helmet's ear pockets, ensuring they are aligned with your ears for clear audio. Secure the microphone in front of your mouth, typically on the left side, ensuring it is close enough to pick up your voice clearly but not obstructing your vision.

4.3. Iċċarġjar tal-Apparat

Before first use, fully charge the MS8 unit using the provided Type-C charging cable. Connect the cable to the MS8 unit and a standard USB power adapter (DC5V/1A recommended). The indicator light will show charging status.

Figure 8: Helmet Installation Steps (Clip and Headphone)

5. Istruzzjonijiet Operattivi

5.1. Power On/Off

• Qawwa Mixgħul: Agħfas u żomm il-buttuna tal-Qawwa għal madwar 3 sekondi sakemm id-dawl indikatur jteptep.
• Itfi: Agħfas u żomm il-buttuna tal-Power għal madwar 3 sekondi sakemm id-dawl indikatur jintefa.

5.2. Bluetooth Pairing (with Mobile Phone)

1. Ensure the MS8 is powered off.
2. Press and hold the Power button for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. On your mobile phone, enable Bluetooth and search for "EJEAS MS8".
4. Select "EJEAS MS8" to connect. Once connected, the indicator light will flash blue slowly.

5.3. Mesh Intercom Operation

The MS8's Mesh Intercom allows for dynamic group communication without traditional pairing.

• Initiating Mesh Intercom: With the unit powered on, press the Mesh button (M button) once. The unit will enter Mesh mode and automatically search for other MS8 units within range to form a group.
• Joining a Group: Simply power on your MS8 and activate Mesh mode. It will automatically join any active Mesh group within range.
• Tħalli minn Grupp: Press the Mesh button again to exit Mesh mode.

5.4. Daqq tal-mużika

• Play/Pawsa: Agħfas il-buttuna Power darba.
• Track li jmiss: Agħfas il-buttuna '+'.
• Track preċedenti: Agħfas il-buttuna '-'.
• Volum 'il fuq: Agħfas u żomm il-buttuna '+'.
• Volum 'l isfel: Agħfas u żomm il-buttuna '-'.

When in Mesh mode, music will automatically pause when someone speaks and resume after 5 seconds of silence.

5.5. Radju FM

• Ixgħel/Itfi l-FM: Press the FM button (if available, or a combination of buttons as per specific model instructions).
• Scan Channels: Press the '+' or '-' button briefly to scan for the next/previous station.

5.6. Telefonati

• Irrispondi Sejħa: Agħfas il-buttuna Power darba.
• Tmiem Sejħa: Agħfas il-buttuna tal-Enerġija darba waqt telefonata.
• Irrifjuta Sejħa: Agħfas u żomm il-buttuna Power għal 2 sekondi.
• Isemmi mill-ġdid l-Aħħar Numru: Agħfas darbtejn il-buttuna tal-Enerġija.
• Attiva l-Assistent tal-Vuċi: Triple-press the Power button.
• Mute tal-mikrofonu: Refer to specific button combination in the quick start guide for this function.

6. Manutenzjoni

• Tindif: Imsaħ l-unità b'artab, damp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
• Ħażna: Aħżen l-apparat f'post frisk u niexef meta ma jkunx qed jintuża. Evita temperaturi estremi.
• Kura tal-batterija: To prolong battery life, charge the unit regularly, even if not used for extended periods. Avoid fully discharging the battery frequently.
• Reżistenza għall-Ilma: While IP67 waterproof, avoid submerging the unit in water for prolonged periods. Ensure the Type-C port cover is securely closed.

7 Issolvi l-problemi

• 7.1. L-Apparat Ma Jixgħelx

  Ensure the battery is charged. Connect the unit to a power source and try again after a few minutes of charging.

• 7.2. No Sound from Speakers

  Check if the speakers are properly connected to the unit. Ensure the volume is not set to minimum. Verify that the unit is connected to the correct audio source (phone, intercom, FM).

• 7.3. Cannot Pair with Phone/Other Intercoms

  Ensure both devices are in pairing mode. Keep devices within close proximity during pairing. If issues persist, try resetting the MS8 unit (refer to the quick start guide for reset procedure) and re-attempt pairing.

• 7.4. Intercom Range is Short or Connection is Unstable

  Ensure there are no major obstructions between units. Check for strong electromagnetic interference. For Mesh Intercom, ensure all units are within the effective range and not too spread out.

8. Speċifikazzjonijiet

Figura 9: Dimensjonijiet u Speċifikazzjonijiet tal-Prodott

9. Garanzija u Appoġġ

EJEAS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official EJEAS websit. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.