Manwal tal-Istruzzjonijiet tal-Kontrollur tal-Iċċarġjar Solari diymore 30A 12V/24V PWM

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your diymore 30A 12V/24V PWM Solar Charge Controller. This intelligent controller is designed to manage the power flow from your solar panel to your battery, ensuring efficient charging and protecting your battery from overcharge and over-discharge. It features a large LCD screen, dual USB outputs, and comprehensive 3-stage Ġestjoni tal-ħlasijiet PWM.

Karatteristiċi ewlenin:

• Light control and time control discharge functionality.
• Compatible with lead-acid batteries (OPEN, AGM, GEL).
• 3-stage PWM charge management: direct charge, boost charge, and float charge.
• Dual MOS reverse current protection, low heat generation.
• Built-in overcurrent, short-circuit, open-circuit, and reverse connection protection.
• Dual USB output (5V/2A Max) for mobile phone charging.
• Automatic 12V/24V voltage identifikazzjoni.

2. Informazzjoni u Prekawzjonijiet dwar is-Sigurtà

Please read all safety instructions carefully before installation and operation to prevent damage to the controller, battery, or other components.

• This solar charge controller is designed exclusively for batteriji taċ-ċomb-aċidu (OPEN, AGM, GEL). Do not use it with other battery types, including lithium batteries or nickel-metal hydride batteries.
• The controller can only use photovoltaic panels as its power source. Do not use DC or other power sources as a power source.
• Kun żgur li l-batterija għandha volum biżżejjedtage for the controller to recognize its type (12V or 24V) during the first installation.
• Install the controller close to the battery to minimize voltage drop due to excessive wire length, which can affect accurate voltagSejbien.
• The controller will generate heat during operation. Install it on a flat, well-ventilated surface to ensure proper heat dissipation.
• Always connect the components in the specified order to avoid damage.

3. Prodott Aktarview

Familiarize yourself with the components and display of the solar charge controller.

Figura 1: Quddiem view of the diymore 30A 12V/24V PWM Solar Charge Controller, showing the LCD display, control buttons, and USB ports.

Figura 2: Dettaljat view of the LCD display and control buttons. The display shows voltage, fil-mijatage, and icons for solar panel, battery, and load. Buttons are labeled for Menu, Up, and Down/Manual.

The LCD screen displays various parameters such as voltage, charging/discharging current, accumulated electricity generation, temperature, and battery status. The three buttons below the screen are used for navigation and setting adjustments.

4. Setup u Installazzjoni

Follow these steps for proper installation of the solar charge controller. Ensure all connections are secure and correct to prevent damage.

1. Prepare the Installation Location: Choose a flat, well-ventilated surface near the battery. Avoid direct sunlight, high temperatures, and humid environments.
2. Qabbad il-batterija: Connect the positive and negative terminals of the battery to the corresponding battery terminals on the controller. The controller will automatically detect the battery voltage (12V or 24V). Ensure the battery has sufficient charge for detection.
3. Qabbad il-Panel Solari: Connect the positive and negative terminals of the solar panel to the corresponding solar panel terminals on the controller.
4. Qabbad it-Tagħbija: Connect the positive and negative terminals of your DC load to the corresponding load terminals on the controller. Be careful not to reverse the connections.

Figure 3: Wiring diagram illustrating the connection order: Battery first, then Solar Panel, then Load.

Importanti: Dejjem qabbad il-batterija l-ewwel, imbagħad il-pannell solari, u fl-aħħar it-tagħbija. Skonnettja fl-ordni inversa: it-tagħbija, imbagħad il-pannell solari, imbagħad il-batterija.

5. Istruzzjonijiet Operattivi

The controller features an intuitive LCD display and three control buttons for easy operation.

5.1 Informazzjoni dwar id-Displej tal-LCD

The LCD screen provides real-time information about your solar system:

• Voltage Simbolu: Jindika l-volum kurrentitage.
• Żona tal-Wiri Diġitali: Shows numerical values for voltage, kurrent, temperatura, eċċ.
• Sigħat: Displays time-related settings or accumulated hours.
• Panels Icon: Indicates solar panel activity.
• Charging Logo: Shows charging status (steady on for straight charge/lift charge, slow flash for float charge).
• Five Battery Level Mark: Rappreżentazzjoni viżwali tal-livell tal-iċċarġjar tal-batterija.
• Load Identification: Indicates load status.
• Output Identification: Shows output status.

5.2 Funzjonijiet tal-buttuni

• Ċavetta tal-Menu: Used to cycle through display modes and enter/exit setting menus.
• Ċavetta tal-Vleġġa 'l fuq: Used to increase values or navigate upwards in menus.
• Down Arrow / Manual Key: Used to decrease values, navigate downwards in menus, or manually control the load output (when in manual mode).

5.3 Issettjar tal-Parametri

To adjust parameters like charge voltage, skarika cut-off voltage, or load control mode:

1. Agħfas il- Ewlenin tal-Menu biex tidħol fil-mod ta' l-issettjar.
2. Uża l- Up Arrow u Vleġġa 'l isfel keys to navigate through the different parameters.
3. Once you've selected a parameter, press the Ewlenin tal-Menu again to make it blink, indicating it's ready for adjustment.
4. Uża l- Up Arrow u Vleġġa 'l isfel ċwievet biex jibdlu l-valur.
5. Agħfas il- Ewlenin tal-Menu once more to confirm the setting and save it.
6. Oħroġ mill-modalità tas-settings billi tagħfas il-buttuna Ewlenin tal-Menu until the display returns to the main interface.

The controller also features light control and time control functions, allowing discharge to be controlled by sunlight and set time periods. Refer to the display icons for current status.

6. Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-kontrollur tal-iċċarġjar solari tiegħek.

• Spezzjona Konnessjonijiet: Periodically check all wire connections to ensure they are tight and free from corrosion. Loose connections can cause voltagqtar elettroniku u sħana żejda.
• Naddaf il-Kontrollur: Keep the controller clean and free from dust and debris. Use a dry cloth to wipe the surface. Do not use liquids or solvents.
• Ventilazzjoni: Kun żgur li ż-żona tal-installazzjoni tibqa' ventilata sew biex tevita li l-kontrollur jisħon iżżejjed.
• Spezzjoni tal-batterija: Regularly check the battery terminals for corrosion and ensure the battery itself is in good condition.
• Kundizzjonijiet Ambjentali: Avoid exposing the controller to extreme temperatures or excessive moisture.

7 Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom bil-kontrollur tal-iċċarġjar solari tiegħek.

Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

8. Speċifikazzjonijiet

Detailed technical specifications for the diymore 30A 12V/24V PWM Solar Charge Controller.

Figure 4: Product dimensions in millimeters and inches.

9. Garanzija u Appoġġ

Specific warranty details are not provided in the product information. For warranty claims or technical support, please contact the seller directly through your purchase platform. Ensure you have your purchase details and model number (DMXB0070-01) available when contacting support.