TWIG 5-Light Farmhouse Linear Chandelier Instruction Manual

1. Introduzzjoni

Welcome to your new TWIG 5-Light Farmhouse Linear Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Image 1.1: The TWIG 5-Light Farmhouse Linear Chandelier installed in a dining room setting.

2. Informazzjoni Importanti dwar is-Sigurtà

Biex tnaqqas ir-riskju ta’ nar, xokk elettriku, jew korriment personali, dejjem segwi dawn il-prekawzjonijiet ta’ sigurtà:

• Always turn off the electrical supply at the main circuit breaker or fuse box before beginning installation, cleaning, or maintenance.
• Ikkonsulta elettriċista kwalifikat jekk m'intix ċert dwar il-proċess tal-wajers.
• Immaniġġja l-komponenti tal-ħġieġ b'attenzjoni biex tevita li jinkisru u li tagħmel xi korriment.
• Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
• Dan l-apparat huwa ddisinjat għall-użu fuq ġewwa biss.
• Initial Odor Note: This product is handmade and uses environmental protective coatings. An initial odor may be present upon opening the packaging. It is recommended to air out the product in a well-ventilated environment for a period of time before installation.

3. Kontenut tal-Pakkett

Please verify that all parts are present before discarding packaging materials:

• 1 x TWIG 5-Light Farmhouse Linear Chandelier (Model 2024072303)
• Mounting Hardware (includes mounting plate, screws, wire nuts, canopy nuts)
• Vireg Mdendlin Aġġustabbli
• Glass Shades (5 pieces)

Nota: Light bulbs are not included with this fixture.

4. Speċifikazzjonijiet tal-Prodott

Image 4.1: Product dimensions and adjustable rod lengths.

Image 4.2: Bulb compatibility for E26 base, up to 60W.

5. Setup (Installation Instructions)

This fixture is 95% pre-assembled for your convenience. Only simple assembly and electrical installation are required.

Għodod Meħtieġa:

• Tornavit (Phillips u Flathead)
• Strippers tal-Wajer
• Tejp Elettriku
• Sellum
• Nuċċalijiet tas-Sigurtà

Passi ta' qabel l-installazzjoni:

1. Itfi l-enerġija mis-circuit breaker prinċipali jew mill-kaxxa tal-fjusijiet. Ensure the power is completely off before proceeding.
2. Iftaħ il-komponenti kollha mill-pakkett bir-reqqa u spezzjonahom għal xi ħsara.
3. Familiarize yourself with the parts and the installation diagram provided.

Assembly and Electrical Installation:

1. Pass 1: Attach the mounting plate to the ceiling junction box using the provided screws. Ensure it is securely fastened.
2. Pass 2: Connect the fixture's wires to the house wiring. Connect the black wire from the fixture to the black wire from the ceiling (live/hot). Connect the white wire from the fixture to the white wire from the ceiling (neutral). Connect the ground wire from the fixture to the ground wire from the ceiling. Use wire nuts to secure all connections and wrap with electrical tape for added safety.
3. Pass 3: B'attenzjoni daħħal il-wajers kollha fil-kaxxa tal-junction.
4. Pass 4: Attach the fixture's canopy to the mounting plate, securing it with the decorative nuts.
5. Pass 5: Adjust the hanging rods to your desired height. The height can be adjusted from a minimum of 23 inches to a maximum of 46 inches.
6. Pass 6: Install the clear glass shades onto the fixture.
7. Pass 7: Screw in E26 base light bulbs (not included) into each of the five sockets. Do not exceed 60W per bulb; 40W is recommended for optimal performance and longevity.

Image 5.1: Installation steps diagram for the chandelier.

Wara l-Installazzjoni:

Once installation is complete, restore power at the main circuit breaker. Test the light fixture to ensure proper operation.

6. Istruzzjonijiet Operattivi

Your TWIG 5-Light Farmhouse Linear Chandelier is designed for straightforward operation.

• Ensure all five E26 base bulbs are securely installed in their sockets.
• Operate the light fixture using your standard wall switch.
• If you wish to use a dimmer function, ensure you install dimmable E26 bulbs and have a compatible dimmer switch (not included) installed in your electrical system.

7. Kura u Manutenzjoni

Proper care will ensure the longevity and appearance of your chandelier.

Tindif:

1. Always turn off the power supply to the fixture at the circuit breaker and allow it to cool completely before cleaning.
2. For metal and wood surfaces, wipe gently with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
3. Glass shades can be carefully removed and washed with mild soap and water. Rinse thoroughly and dry completely before reattaching them to the fixture.

Sostituzzjoni tal-bozza:

1. Turn off the power supply to the fixture at the circuit breaker.
2. Allow the bulbs to cool down completely before touching them.
3. Ħoll il-bozza l-qadima mis-sokit tagħha bir-reqqa.
4. Screw in a new E26 base bulb, ensuring it does not exceed the maximum recommended wattage of 60W (40W recommended).

8 Issolvi l-problemi

If you encounter any issues with your chandelier, refer to the following common problems and solutions:

9. Garanzija u Appoġġ għall-Klijent

TWIG is committed to providing quality products and customer satisfaction.

For any questions, concerns, or assistance regarding your TWIG 5-Light Farmhouse Linear Chandelier, please do not hesitate to contact our customer support team via email. We strive to respond to all inquiries within 24 hours.

Please refer to your purchase documentation or retailer for specific warranty details and terms applicable to your product.