Manwal tal-Utent tal-Qafas tas-Sodda tal-Pjattaforma tal-Metall MAF ta' 14-il Pulzier Queen

Introduzzjoni

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your MAF 14-Inch Queen Metal Platform Bed Frame. Please read this manual thoroughly before assembly and retain it for future reference.

Informazzjoni Importanti dwar is-Sigurtà

• Exercise caution around metal slats during assembly and use.
• Ensure all components are properly assembled and tightened before use to prevent instability.
• Teċċedix il-kapaċità massima tal-piż ta' 3000 libbra.
• Żomm partijiet żgħar 'il bogħod mit-tfal waqt l-assemblaġġ.

Kontenut tal-Pakkett

Qabel tibda l-assemblaġġ, ivverifika li l-partijiet kollha elenkati hawn taħt huma preżenti u mhux imħassra. Jekk xi partijiet huma nieqsa jew imħassra, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

• Taqsimiet tal-Qafas tas-Sodda (Ras, Saqajn, Binarji tal-Ġenb)
• Saqajn ta' Appoġġ
• Paletti tal-Azzar
• Mattress Stopper(s)
• Anti-slip Rubber Pads for Legs
• Ħardwer tal-Assemblaġġ (Boltijiet, Washers, Skorfini)
• Assembly Tool (Hex Key/Wrench)
• Manwal ta' Istruzzjoni

This image displays a table detailing various bed frame sizes, corresponding mattress dimensions, the maximum weight capacity of 3000 LBS, and the typical contents included in the box for each size, including the bed frame, instructions, screws, and wrench.

Setup u Assemblea

Assembly of the MAF Queen Metal Platform Bed Frame is designed to be straightforward and can typically be completed by one person in approximately 20 minutes. All necessary tools are included in the package.

1. Ħoll il-Komponenti: Neħħi l-partijiet kollha mill-imballaġġ bir-reqqa u poġġihom fuq wiċċ nadif u artab biex tevita l-grif. Ivverifika l-partijiet kollha mal-lista tal-kontenut tal-pakkett.
2. Arma s-Sezzjonijiet tal-Qafas: Connect the main frame sections (side rails, head, and foot sections) using the provided hardware. Do not fully tighten bolts until all sections are loosely connected.
3. Waħħal is-Saqajn ta' Appoġġ: Securely attach all support legs to the frame. Ensure the anti-slip rubber pads are placed on the bottom of each leg to protect your floor and prevent sliding.
4. Installa l-Paletti tal-Azzar: Place the steel slats into the designated U-shaped grooves on the frame. Ensure each slat is properly seated to provide optimal mattress support and prevent movement.
5. Install Mattress Stopper(s): Attach the mattress stopper(s) to the designated points on the frame. Ensure they are mounted outwards to effectively prevent the mattress from slipping.
6. Issikkar finali: Once all components are in place and aligned, systematically tighten all bolts using the provided wrench. Ensure all connections are secure but do not overtighten.

This image illustrates the correct way to mount the mattress stopper, showing it positioned outwards from the frame, and an incorrect example where it is mounted inwards.

Istruzzjonijiet Operattivi

Tqegħid tas-Saqqijiet

This platform bed frame is designed to be used without a box spring. Place your mattress directly onto the steel slats. The integrated mattress stoppers and anti-skid baffles will help keep your mattress securely in place.

This image shows the MAF bed frame with a mattress placed directly on its slats, illustrating the "No Box Spring Needed" feature.

Kapaċità tal-piż

The MAF 14-Inch Queen Metal Platform Bed Frame is constructed from heavy-duty steel and is capable of supporting up to 3000 pounds. Distribute weight evenly across the frame.

This image highlights the robust construction of the bed frame, emphasizing its 3000 LBS weight capacity.

Ħażna taħt is-sodda

With 14 inches of height, the frame provides approximately 12.4 inches of clearance for under-bed storage, allowing you to maximize space in your bedroom.

This image demonstrates the generous 12.4-inch under-bed clearance, suitable for storing various items.

Manutenzjoni

• Tindif: Imsaħ il-qafas tal-metall b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif li joborxu jew kimiċi ħarxa li jistgħu jagħmlu ħsara lill-finitura.
• Iċċekkja tal-Hardware: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary to maintain stability and prevent noise.
• Protezzjoni tal-Art: Ensure the rubber foot pads are intact and in place to protect your flooring and prevent the frame from sliding.

Issolvi l-problemi

Speċifikazzjonijiet

• Mudell: MT10-JD-AMZ01-14Q
• Daqs: Reġina
• Dimensjonijiet tal-Prodott: 79.5"T x 59.5"W x 14"Għ
• Daqs tas-Saqqu Kompatibbli: 80" x 60"
• Materjal: Azzar Heavy Duty
• Kulur: Iswed
• Tip ta 'Finish: Matte
• Kapaċità tal-piż: 3000 LBS
• Ground to Item Distance (Under-bed Clearance): 12.4 Pulzier
• Slat Distance: 5.5 Inches (for Queen/King sizes)
• Karatteristiċi Speċjali: Rounded Corners, Steel Slat Support, No Box Spring Needed, Easy Assembly, Storage Space, Squeak Resistant, Anti-Slip Design
• Assemblaġġ Meħtieġa: Iva

This image provides a visual representation of the queen bed frame's dimensions, including overall length, width, height, and under-bed storage clearance.

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

This MAF Metal Platform Bed Frame comes with a 5-year after-sale service. This warranty covers manufacturing defects and structural integrity under normal use. Please retain your proof of purchase for warranty claims.

Appoġġ għall-Klijent

For any questions, assistance with assembly, missing parts, or warranty claims, please contact MAF customer support. We are committed to providing a satisfactory solution as quickly as possible.

Informazzjoni ta' Kuntatt:

• Email: support@maf-sleep.com (Eżamp(eż., l-email attwali mhux ipprovduta)
• Telefon: 1-800-XXX-XXXX (Eż.amp(jiġifieri, it-telefon attwali mhux ipprovdut)
• Websit: www.maf-sleep.com (Eżample, attwali website not provided)

Please note: The contact email, phone, and website provided above are examples. Refer to your product packaging or purchase documentation for official MAF customer support details.