1. Introduzzjoni
Thank you for choosing the Bravilor Bonamat HWA 14 Hot Water Dispenser. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and keep it for future reference.
2. Istruzzjonijiet tas-Sigurtà
To ensure safe operation and prevent damage to the appliance or injury to users, please observe the following safety precautions:
- Sigurtà Elettrika: Always connect the dispenser to a grounded power outlet. Do not operate with a damaged power cord or plug. Keep the power cord away from hot surfaces.
- Hot Surfaces and Water: The dispenser produces hot water and surfaces may become hot during operation. Exercise extreme caution to avoid burns. Do not touch hot surfaces directly.
- Livell tal-Ilma: Never operate the dispenser without sufficient water in the tank. This can cause damage to the heating element.
- Tindif: Disconnect the power supply before cleaning. Do not immerse the appliance in water or other liquids. Use only recommended cleaning agents.
- Tfal u Superviżjoni: Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom. It-tfal għandhom ikunu sorveljati biex jiżguraw li ma jilagħbux bl-apparat.
- Tiswijiet: Do not attempt to repair the appliance yourself. All repairs should be performed by qualified service personnel.
3. Prodott Aktarview
The Bravilor Bonamat HWA 14 is a robust and efficient hot water dispenser designed for various applications. Familiarize yourself with its main components:
3.1 Komponenti
- Unità Prinċipali (Akkomodazzjoni)
- Water Tank (internal, 13.1 L capacity)
- Tektek tad-Dispensing
- Drip Trey
- Power Switch / Indicator Lights
- Korda tal-Enerġija
3.2 Prodott Views

Figura 1: Quddiem view of the Bravilor Bonamat HWA 14, showing the main body, dispensing tap, and drip tray.

Figura 2: Angolat view of the dispenser, highlighting its compact design and side panel.

Figura 3: Ġenb view of the dispenser, illustrating its depth and overall dimensions.
4. Setup
4.1 Disimballaġġ
- Neħħi d-dispenser mill-imballaġġ tiegħu bir-reqqa.
- Neħħi l-materjali tal-ippakkjar kollha, inklużi kwalunkwe films jew tejps protettivi.
- Inspect the appliance for any signs of damage. If damaged, do not use and contact your supplier.
4.2 Tqegħid
- Place the dispenser on a stable, level, and heat-resistant surface.
- Ensure adequate ventilation around the unit. Do not place it directly against a wall or in an enclosed cabinet.
- Keep the dispenser away from direct sunlight, heat sources, and areas with high humidity.
- Kun żgur li s-sokit tal-elettriku huwa faċilment aċċessibbli.
4.3 Tindif Inizjali
- Before first use, clean the water tank and dispensing tap.
- Fill the tank with clean water and dispense a few liters to flush the system. Discard this water.
- Imsaħ il-barra bl-adamp drapp.
5. Istruzzjonijiet Operattivi
5.1 Mili tat-Tank tal-Ilma
- Ensure the dispenser is unplugged or powered off.
- Iftaħ l-għatu tat-tank tal-ilma.
- Fill the tank with fresh, cold drinking water up to the maximum fill line. Do not overfill.
- Agħlaq l-għatu sew.
5.2 Tixgħel
- Ipplaggja l-korda tad-dawl fi żbokk elettriku ertjat.
- Ixgħel is-swiċċ prinċipali tal-enerġija, li ġeneralment ikun jinsab fuq wara jew fil-ġenb tal-unità.
- The indicator light will illuminate, signaling that the heating process has begun. The water will heat to the optimal temperature. This may take several minutes depending on the initial water temperature and tank capacity.
5.3 Tqassim ta' Ilma sħun
- Once the water has reached the desired temperature (indicated by a change in the indicator light or a ready signal), place a cup or container under the dispensing tap.
- Press or pull the dispensing lever/button to release hot water.
- Release the lever/button to stop the flow.
- Attenzjoni: Hot steam may be released during dispensing.
5.4 Tifi
- When not in use for extended periods, turn off the main power switch.
- Skonnettja d-dispenser mill-plagg tal-elettriku.
6. Manutenzjoni
Regular maintenance ensures the longevity and optimal performance of your hot water dispenser.
6.1 Tindif ta 'Kuljum
- Battal u naddaf it-trej tat-taqtir regolarment.
- Imsaħ l-uċuħ ta 'barra b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Clean the dispensing tap with a soft brush or cloth to remove any residue.
6.2 Tneħħija tal-Ġebla
Depending on water hardness, limescale can build up inside the tank and heating elements. Descale the unit regularly (e.g., every 1-3 months) using a suitable descaling agent for hot water appliances. Follow the descaling agent's instructions carefully.
- Ensure the dispenser is unplugged and cooled down.
- Prepare the descaling solution according to the product instructions.
- Ferra s-soluzzjoni fit-tank tal-ilma.
- Allow it to sit for the recommended time.
- Ixxotta s-soluzzjoni kompletament.
- Rinse the tank thoroughly by filling and draining with fresh water several times to remove all descaling residue.
6.3 Ħażna
If storing the dispenser for an extended period, ensure it is clean, dry, and empty of water. Store it in a cool, dry place, away from direct sunlight and extreme temperatures.
7 Issolvi l-problemi
Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom. Jekk il-problema tippersisti, ikkuntattja l-appoġġ għall-klijenti.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda qawwa | Dispenser unplugged; Power outlet faulty; Power switch off. | Check power cord connection; Test outlet with another device; Turn on power switch. |
| Ilma mhux tisħin | Insufficient water in tank; Heating element malfunction. | Fill water tank to appropriate level; Contact customer support if problem persists. |
| Fluss ta 'ilma bil-mod | Limescale buildup in tap or internal pipes. | Perform descaling procedure. Clean dispensing tap. |
| L-ilma għandu togħma stramba | First use residue; Need for cleaning/flushing. | Flush the system with several tanks of fresh water. Clean the tank. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Bravilor Bonamat |
| Numru tal-Mudell | 57325-b2b |
| Isem tal-Mudell | HWA 14 |
| Kulur | Multicolor (Bunt) |
| Kapaċità | 13.1 Litri |
| Dimensjonijiet tal-Prodott (approssimattivi) | 50 x 30 x 30 cm (Packaging dimensions, actual product dimensions may vary slightly) |
| Piż tal-oġġett | 2.5 Kilogrammi |
| Komponenti Inklużi | Hot Water Dispenser, Instruction Manual |
9. Garanzija u Appoġġ
For warranty information and customer support, please refer to the documentation provided with your purchase or contact your local Bravilor Bonamat distributor. Keep your proof of purchase for any warranty claims.
For further assistance, visit the official Bravilor Bonamat websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.





