Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your PRUVEEO Suction Cup Mount D30. Please read this manual carefully before use to ensure proper functionality and longevity of the product. This mount is designed to securely hold your PRUVEEO Dash Cam D30, offering a stable and reliable attachment to your vehicle's windshield or dashboard.
Kontenut tal-Pakkett
- 1 x PRUVEEO Suction Cup Mount D30
Setup u Installazzjoni
Follow these steps to properly install your PRUVEEO Suction Cup Mount D30:
- Agħżel Post: Select a clean, smooth, and flat surface on your windshield or dashboard. Ensure the chosen location does not obstruct your view of the road or interfere with airbags.
- Naddaf il-wiċċ: Thoroughly clean the chosen mounting surface with a glass cleaner or rubbing alcohol. Allow the surface to dry completely before proceeding. A clean surface is crucial for strong suction.
- Waħħal it-Tazza tal-Ġbid: Press the suction cup firmly against the cleaned surface. While maintaining pressure, push down the lever on the suction cup base to create a vacuum seal. Ensure the mount is securely attached and does not wobble.
- Waħħal id-Dash Cam: Slide the PRUVEEO Dash Cam D30 onto the mounting bracket of the suction cup mount until it clicks securely into place.
- Aġġusta l-Angolu: Loosen the adjustment knob on the mount to tilt and rotate the dash cam to your desired recording angle. Once the angle is set, tighten the knob firmly to lock the position.
Image: The PRUVEEO Suction Cup Mount D30, showing its suction cup base and adjustable bracket for attaching a dash cam.
Tħaddim tal-Muntanja
The PRUVEEO Suction Cup Mount D30 is designed for simple and secure operation:
- L-aġġustament View Angolu: The mount features a tilt head mechanism. To adjust the viewing angle of your dash cam, loosen the hexagonal nut on the side of the mount, reposition the camera, and then tighten the nut securely.
- Removing the Mount: To remove the mount, lift the lever on the suction cup base to release the vacuum seal. Gently pull the tab on the edge of the suction cup to break the seal completely, then carefully detach the mount from the surface. Avoid forceful pulling to prevent damage.
Manutenzjoni
Proper maintenance ensures the longevity and optimal performance of your suction cup mount:
- Tindif tal-Ġbid tal-Ventilazzjoni: If the suction cup loses its grip, clean it with warm water and mild soap. Rinse thoroughly and let it air dry completely. Do not wipe with a cloth, as lint can impair suction.
- Cleaning the Mounting Surface: Regularly clean the surface where the mount is attached to remove dust, dirt, or oils that can reduce suction effectiveness.
- Ħażna: When not in use, store the mount in a cool, dry place away from direct sunlight. Ensure the suction cup is clean and free of debris.
Issolvi l-problemi
If you encounter issues with your PRUVEEO Suction Cup Mount D30, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Mount does not stick or falls off. | Dirty surface; cold temperature; damaged suction cup; improper application. | Clean the mounting surface and suction cup. Ensure surface is dry. Apply mount in a warm environment. Press firmly and engage lever. Inspect suction cup for damage. |
| Dash cam is loose on the mount. | Dash cam not fully inserted; adjustment knob loose. | Ensure the dash cam is fully slid into the bracket until it clicks. Tighten the adjustment knob firmly. |
| Mount leaves residue on windshield. | Prolonged exposure to heat/sunlight. | Clean the windshield with a glass cleaner. Consider repositioning the mount periodically or removing it when not in use for extended periods in direct sunlight. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Dimensjonijiet tal-Prodott | 2 x 1 x 0.5 pulzieri |
| Piż tal-oġġett | 1.44 uqija |
| Numru tal-Mudell tal-Oġġett | D30 |
| Kulur | Iswed |
| Tip ta 'Immuntar | Ġbid |
| Karatteristika Speċjali | Mejjel ir-ras |
| Apparati Kompatibbli | Cameras (specifically PRUVEEO Dash Cam D30) |
Garanzija u Appoġġ
PRUVEEO stands behind the quality of its products. While specific warranty terms may vary, most products are covered by a limited warranty against manufacturing defects. Please retain your proof of purchase for any warranty claims.
For technical support, warranty inquiries, or any other questions regarding your PRUVEEO Suction Cup Mount D30, please contact PRUVEEO customer service through the official PRUVEEO website or your point of purchase. You can also visit the PRUVEEO Store on Amazon għal aktar informazzjoni u għażliet ta' kuntatt.
Politika ta' Ritorn: This product is eligible for a 30-day return policy from the date of purchase, subject to the terms and conditions of the retailer.
