1. Introduzzjoni
The Vento VIVI-DC is a 10-inch wall mount swivel fan designed to enhance airflow in various indoor spaces. Its unique triaxial design and folding arm allow for versatile positioning and efficient air circulation. This manual provides essential information for the safe installation, operation, and maintenance of your VIVI-DC fan.
Figura 1: Quddiem view of the Vento VIVI-DC fan, showcasing its compact design and walnut finish.
2. Istruzzjonijiet tas-Sigurtà
Jekk jogħġbok aqra l-istruzzjonijiet kollha tas-sigurtà bir-reqqa qabel l-installazzjoni u t-tħaddim biex tevita korriment jew ħsara.
- Always unplug the fan from the power source before cleaning, maintenance, or when not in use.
- Do not insert fingers or any objects through the fan guard when the fan is operating.
- Ensure the fan is mounted securely to a wall stud or appropriate anchor points to prevent it from falling.
- This fan is designed for indoor use only. Do not use it outdoors or in wet environments.
- Keep the power cord away from heated surfaces and sharp edges.
- Do not operate the fan with a damaged cord or plug. Contact customer support for assistance.
- Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew struzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom. .
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- Fan Unit (Shield, Blades, Fan Housing)
- Bracket tal-Immuntar
- Kontroll mill-bogħod
- Remote Transmitter Holder
- Provvista ta 'enerġija DC
- Iġbed il-Katina
- Screw Pack (4 x Screws, 4 x Plastic Wall Plugs, 1 x Pull Chain Extension)
- Screws for Transmitter Holder (2 x Screws)
Figura 2: Sploda view showing all included components and accessories for the VIVI-DC fan.
4. Setup u Installazzjoni
Follow these steps for proper installation of your VIVI-DC wall mount fan.
4.1 Għodda Meħtieġa (Mhux Inkluża)
- Drill
- Tornavit tar-ras Phillips
- Lapes
- Tejp tal-Kejl
4.2 Immuntar tal-Fann
- Agħżel Post: Choose a suitable indoor wall location, preferably near a power outlet. Ensure the mounting surface can support the fan's weight (approximately 7 lbs).
- Immarka l-Punti tat-Tħaffir: Hold the mounting bracket against the wall at the desired height. Use a pencil to mark the positions for the four mounting screws.
- Drill Pilota Toqob: Drill pilot holes at the marked positions. If mounting into drywall, insert the plastic wall plugs into the pilot holes.
- Bracket tal-Immuntar Sikur: Align the mounting bracket with the pilot holes and secure it to the wall using the four screws provided.
- Attach Fan Unit: Carefully attach the fan unit to the secured mounting bracket. Ensure it clicks or locks into place firmly.
- Qabbad l-Enerġija: Plug the DC power supply into the fan unit and then into a standard wall outlet.
- Install Remote Holder (Optional): Mount the remote transmitter holder to a convenient location using the two smaller screws provided.
Figure 3: Dimensional diagram of the VIVI-DC fan, useful for planning installation space.
5. Operazzjoni
The VIVI-DC fan can be controlled using the included remote control or the integrated pull chain.
5.1 Kontroll mill-Bogħod
The remote control allows you to power the fan on/off and adjust its speed settings.
Figure 4: The remote control for the VIVI-DC fan, featuring power and speed adjustment buttons.
- Buttuna tal-Qawwa (⏻): Press once to turn the fan on or off.
- Speed Button (Low Speed): Press to set the fan to low speed.
- Speed Button (High Speed): Press to set the fan to high speed.
5.2 Pull Chain
The pull chain provides an alternative method for basic fan control.
- Pull the chain once to turn the fan on (default to low speed).
- Pull the chain again to switch to high speed.
- Pull the chain a third time to turn the fan off.
5.3 Aġġustament tal-Angolu tal-Fann
The VIVI-DC fan features a triaxial design and a swivel arm, allowing you to manually adjust the fan head to direct airflow as needed. Gently pivot the fan head and arm to achieve the desired angle.
6. Manutenzjoni
Regular cleaning will help maintain the fan's performance and appearance.
- Dejjem aqla’ l-fann qabel it-tindif.
- Uża artab, damp drapp biex timsaħ l-uċuħ ta’ barra tal-fann. Tużax prodotti tat-tindif jew solventi li joborxu.
- To clean the fan blades, carefully remove the front grill (if detachable, refer to assembly diagram for guidance). Wipe the blades with a soft cloth. Ensure all parts are dry before reassembling and operating the fan.
- Do not immerse the fan or any electrical components in water or other liquids.
7 Issolvi l-problemi
If you encounter issues with your VIVI-DC fan, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-fann ma jixgħelx | Ebda provvista ta 'enerġija Batterija tal-kontroll mill-bogħod eżawrita | Ensure the DC power supply is securely plugged into the fan and a working outlet. Ibdel il-batterija tal-kontroll mill-bogħod. |
| Fan is noisy or vibrates excessively | Komponenti sfużi Ostruzzjoni fix-xfafar tal-fann | Ensure the fan unit is securely attached to the mounting bracket. Check for any loose screws. Unplug the fan and carefully remove any debris or obstructions from the blades. |
| Il-kontroll mill-bogħod ma jaħdimx | Batterija mdgħajfa Ostruzzjoni bejn il-kontroll remot u l-fann Remot mhux imqabbad (jekk applikabbli) | Ibdel il-batterija tal-kontroll mill-bogħod. Ensure there is a clear line of sight between the remote and the fan's receiver. Refer to specific pairing instructions if provided with the remote (not typically required for this model). |
8. Speċifikazzjonijiet
- Mudell: VIVI-DC
- Ditta: Vento
- Dijametru tal-fann: 10 pulzieri
- Dimensjonijiet tal-Prodott (P x W x H): 10.08" x 12.9" x 14.33"
- Piż tal-oġġett: 7 liri
- Sors tal-Enerġija: DC Powered
- Wattage: 12 watt
- Kapaċità tal-Fluss tal-Arja: 268 pied kubu fil-minuta (CFM)
- Livell ta' Storbju: 48 Decibels (dBa)
- Metodu ta' Kontroll: Remote Control, Pull Chain
- Numru ta' Livelli ta' Qawwa: 2 (Baxx, Għoli)
- Użu fuq ġewwa/barra: Ġewwa Biss
- Karatteristiċi Speċjali: Adjustable Tilt, Remote Controlled, Folding Arm, Energy Efficient DC Motor
9. Garanzija u Appoġġ
The Vento VIVI-DC fan comes with the following warranty:
- Mutur DC: 18-month limited manufacturer's warranty.
- Other Fan Parts: 1-year limited manufacturer's warranty.
For warranty claims, technical support, or replacement parts, please contact Vento customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (VIVI-DC) ready when contacting support.
