Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, and maintenance of the GeoVision GV-TBL8804 8MP H.265 Super Low Lux WDR Pro Full Color Warm LED IR Bullet IP Camera. The GV-TBL8804 is an outdoor network camera designed for day and night surveillance, featuring an automatic IR-cut filter, one IR LED, and two warm LEDs. It supports H.265 video codec for efficient compression and adheres to IP67 standards for outdoor use. The camera can be powered via Power over Ethernet (PoE) and incorporates AI deep learning algorithms for distinguishing human and vehicle movements, enhancing perimeter protection and real-time alerts when integrated with GeoVision Video Management Software (VMS).
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett qabel ma tipproċedi bl-installazzjoni.
- GeoVision GV-TBL8804 8MP Bullet IP Camera
- Gwida għall-Installazzjoni
- Viti u Ankri tal-Immuntar
- Konnettur li ma jgħaddix ilma minnu (għal kejbil Ethernet)
- Software CD (or download link for GV-VMS)
Prodott Overview
The GeoVision GV-TBL8804 camera features a robust design suitable for outdoor environments. Below is an illustration of the camera's main components.
Figura 1: Quddiem u ġenb view of the GeoVision GV-TBL8804 8MP Bullet IP Camera. The image displays the main camera lens, two warm LEDs, and a single IR LED on the front panel. The side shows the GeoVision logo and the adjustable mounting bracket.
Karatteristiċi ewlenin:
- 1/2.7" progressive scan super low lux CMOS sensor for superior low-light performance.
- Day and Night function with a removable IR-cut filter for optimal image quality in varying light conditions.
- Built-in micro SD card slot (SD / SDHC / SDXC / UHS-I, Class 10) for local storage of recordings.
- AI deep learning capabilities for AI Perimeter Protection and classification of human and vehicle objects.
- IP67-rated weather-resistant enclosure for outdoor installation.
- Two-way audio support for communication.
- Alarm sound and warm LED light triggered by AI detection events for enhanced security.
Setup
1. Immuntar tal-Kamera
- Agħżel Post: Choose a suitable outdoor location that provides the desired surveillance coverage and is within range of your network infrastructure. Ensure the mounting surface is sturdy enough to support the camera.
- Drill toqob: Use the provided mounting template (if available) to mark and drill pilot holes for the mounting screws.
- Sikura l-Bracket: Attach the camera's mounting bracket securely to the surface using the supplied screws and anchors.
- Aġġusta Angolu: Loosen the adjustment screws on the bracket to position the camera at the desired angle. Tighten the screws once the camera is in place.
2. Konnessjoni tal-Enerġija u tan-Netwerk
- Kejbil Ethernet: Connect an Ethernet cable from your PoE-enabled network switch or PoE injector to the camera's Ethernet port. Use the waterproof connector to ensure a secure and weather-resistant connection.
- Qawwa (Mhux obbligatorja): If not using PoE, connect a compatible 12V DC power adapter (not included) to the camera's power input.
- Dwal indikaturi: Observe the camera's indicator lights. A solid green light typically indicates a successful network connection and power.
3. Konfigurazzjoni Inizjali
- Installazzjoni tas-Softwer: Install the GeoVision GV-VMS software on a Windows-based computer connected to the same network as the camera.
- Skoperta tal-Apparat: Use the GV-VMS software or GeoVision's IP Device Utility to discover the camera on your network.
- Kredenzjali default: Log in to the camera using the default username and password (refer to the separate Quick Start Guide or GeoVision documentation for default credentials).
- Ibdel il-Password: For security, immediately change the default password to a strong, unique password.
- Issettjar tan-Netwerk: Configure network settings such as IP address (static or DHCP), subnet mask, and gateway as required by your network environment.
- Settings tal-ħin: Issettja d-data u l-ħin korretti, preferibbilment billi tissinkronizza ma' server NTP.
Istruzzjonijiet Operattivi
1. Aċċess għal Live View
- GV-VMS: Open the GeoVision GV-VMS software, add the camera to your device list, and select it to view l-għalf ħaj.
- Web Browser: Daħħal l-indirizz IP tal-kamera f' web browser (e.g., Chrome, Firefox) to access its web interface. Log in with your credentials to view il-feed dirett u kkonfigura s-settings.
- App mobbli: Download and install the GV-Eye mobile application. Add your camera or GV-VMS server to view foo ħajtage mill-bogħod.
2. Configuring Recording
- Ħażna Lokali (Karta SD): Insert a Class 10 micro SD card into the camera's slot. Format the SD card via the camera's web interface or GV-VMS. Configure recording schedules and event-triggered recording settings.
- NVR/VMS Recording: If using a Network Video Recorder (NVR) or GV-VMS, configure recording settings directly within the NVR/VMS software.
3. L-Użu tal-Karatteristiċi tal-AI
- AI Perimeter Protection: Fi ħdan il-kamera web interface or GV-VMS, define detection zones and set rules for AI perimeter protection. This allows the camera to distinguish between human and vehicle intrusions.
- Triggers ta' Avvenimenti: Configure actions to be taken upon AI detection, such as sending alerts, triggering alarm sounds, or activating the warm LED lights.
Manutenzjoni
1. Tindif
- Naddaf il-lenti u l-housing tal-kamera regolarment b'drapp artab u dryer.amp cloth to remove dust, dirt, or water spots.
- Do not use harsh chemicals or abrasive materials, as these can damage the lens or housing.
2. Aġġornamenti tal-Firmware
- Periodically check the GeoVision official websit għall-aġġornamenti tal-firmware.
- Firmware updates can provide new features, performance improvements, and security enhancements.
- Follow the instructions provided with the firmware update package carefully to avoid damaging the device.
3. Backup tad-Data
- If using local SD card storage, regularly back up important recordings to an external storage device or network location.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No image/video feed. | No power, network issue, incorrect IP address. | Check power connection (PoE or adapter). Verify Ethernet cable connection. Ensure camera's IP address is correct and accessible on the network. |
| Kwalità fqira tal-immaġni. | Lenti maħmuġa, fokus mhux xieraq, kundizzjonijiet ta' dawl baxx. | Clean the camera lens. Check focus settings (if adjustable). Ensure sufficient lighting or verify Day/Night mode is functioning correctly. |
| Ma nistax naċċessa l-kamera permezz ta' web browser. | Incorrect IP address, network firewall, browser compatibility. | Confirm the camera's IP address. Check local firewall settings. Try a different web browser. |
| AI detection not working. | Incorrect configuration, environmental factors. | Review AI detection zone and rule settings in the camera's interface. Ensure the camera's view ikun ċar u mhux ostakolat. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | GV-TBL8804 |
| Riżoluzzjoni Għadha Effettiva | 8 MP |
| Massimu WebCam Image Riżoluzzjoni | 8 MP |
| Riżoluzzjoni tal-Qbid tal-Vidjo | 1080p (Note: 8MP resolution is for still images/higher quality streams, 1080p might refer to a common streaming resolution) |
| Teknoloġija tas-Sensor tar-Ritratti | CMOS (1/2.7" progressive scan super low lux) |
| Użu fuq ġewwa/barra | Barra |
| Klassifikazzjoni tal-Protezzjoni Internazzjonali | IP67 |
| Sors tal-Enerġija | Elettriku bil-fili (kompatibbli mal-PoE) |
| Teknoloġija tal-Konnettività | Wireless (refers to IP network connectivity, not Wi-Fi) |
| Protokoll tal-Konnettività | RTSP |
| Tip ta 'Immuntar | Mount Wall |
| Fattur tal-Formola | Bullet |
| Teknoloġija tad-Dawl Baxx | Day/Night, Super Low Lux |
| Tip ta' Sors tad-Dawl | LED (IR and Warm LED) |
| Tip ta 'Focus | Auto Focus |
| Dimensjonijiet tal-oġġett (L x W x H) | 7.4 x 2.8 x 2.8 pulzieri |
| Piż tal-oġġett | 1 liri |
| Manifattur | GeoVision INC |
Garanzija u Appoġġ
GeoVision products are typically covered by a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official GeoVision websit għal termini u kundizzjonijiet dettaljati tal-garanzija.
For technical support, product inquiries, or service requests, please contact GeoVision customer support through their official website or the contact information provided in your product documentation. Ensure you have your product model number (GV-TBL8804) and serial number ready when contacting support.
GeoVision Official Websit: www.geovision.com.tw
