1. Introduzzjoni
Thank you for choosing Linkind Solar Fence Lights. This manual provides essential information for the proper installation, operation, and maintenance of your solar lights. Please read these instructions carefully before use and retain them for future reference.
2. Prodott Aktarview
The Linkind Solar Fence Lights are designed for outdoor use, providing illumination for fences, patios, stairs, and other areas. Each light features 27 LEDs, a motion sensor for enhanced security, and is powered by solar energy, offering an eco-friendly lighting solution. The lights are IP65 rated for weather resistance and emit a 3000K warm white light.
Immaġni 2.1: Fuqview of the Linkind Solar Fence Lights, illustrating the design and components.
3. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Linkind |
| Numru tal-Mudell | LL4000236 |
| Dimensjonijiet (L x W x H) | 10 x 5.3 x 5.8 ċm |
| Piż | 530 g (per unit, approximate) |
| Batterija | 1 Lithium-ion (inkluża) |
| Klassifikazzjoni tal-IP | IP65 (Li ma jgħaddix ilma) |
| Numru ta 'LEDs | 27 |
| Temperatura tal-Kulur Dawl | 3000K Abjad Saħħan |
| Materjal | Acrylonitrile Butadiene Styrene (ABS) |
| Karatteristiċi Speċjali | Ditekter tal-moviment |
| Sors tal-Enerġija | Mħaddma Solari |
| Fluss Luminuż | 200 lm |
4. Kontenut tal-Pakkett
Kun żgur li l-oġġetti kollha huma preżenti u f'kundizzjoni tajba meta tiftaħhom:
- 4 x Linkind Solar Fence Lights
- Mounting Screws and Wall Plugs (quantity sufficient for 4 lights)
- Manwal ta 'Istruzzjoni (dan id-dokument)
5. Installazzjoni
For optimal performance, choose an installation location that receives direct sunlight for at least 6-8 hours daily. Avoid areas under eaves, trees, or other obstructions that may block sunlight.
Passi tal-Immuntar:
- Ipprepara l-wiċċ: Identify the desired mounting location on a fence, wall, or stair riser. Ensure the surface is clean and stable.
- Immarka Punti Drill: Hold the light in position and mark the two screw holes.
- Drill toqob: Use a drill to create holes at the marked points. Insert the provided wall plugs into the drilled holes.
- Sikura d-Dawl: Align the light with the wall plugs and insert the screws, leaving a small gap (approximately 5mm) between the screw head and the wall.
- Iddendel id-Dawl: Hang the light onto the screws. Ensure it is securely fastened.
- Alternative Installation: For surfaces where drilling is not preferred, the lights can also be fixed using strong double-sided adhesive tape (not included).
Image 5.1: Step-by-step visual guide for mounting the solar fence lights.
Immaġni 5.2: Eż.amples of suitable installation locations for the solar lights, including fences, stairs, and walls.
6. Operazzjoni
Initial Activation and Charging:
Before first use, ensure the lights are placed in direct sunlight for at least 8-10 hours to allow the internal battery to fully charge. The lights will automatically charge during the day and turn on at night.
Image 6.1: Illustration of the automatic charging during the day and illumination at night.
Modi tax-Xogħol:
The lights feature multiple working modes, selectable via a button on the unit. Press the button to cycle through the modes:
- Mode 1 (Dim Light Mode): The light stays on at a dim level. When motion is detected, it brightens to 100% for 25 seconds, then returns to dim.
- Mode 2 (Energy Saving Mode): The light remains off. When motion is detected, it brightens to 100% for 25 seconds, then turns off.
- Mode 3 (Lights Off): The lights remain off at all times, regardless of motion.
Image 6.2: Explanation of the three selectable lighting modes.
Funzjonalità tas-Sensor tal-Mozzjoni:
The integrated motion sensor detects movement within a specific range and angle, activating the brighter light modes as configured.
- Distanza ta' sejbien: Sa 6 metri (20 pied)
- Angolu ta' sejbien: 120 grad
Image 6.3: Details of the motion sensor's detection capabilities.
7. Manutenzjoni
Regular maintenance ensures optimal performance and longevity of your solar lights.
- Tindif tal-Panel Solari: Imsaħ il-pannell solari perjodikament b'ċarruta ratba u damp drapp biex tneħħi t-trab, il-ħmieġ, jew il-fdalijiet. Pannell nadif jiżgura ċċarġjar effiċjenti.
- Kura tal-batterija: The integrated Lithium-ion battery is designed for long-term use. Avoid prolonged storage in a completely discharged state. If storing the lights, ensure they are fully charged first.
- Protezzjoni Ambjentali: The lights are IP65 rated, making them waterproof, frost-resistant, heat-resistant, and windproof. However, extreme weather conditions may temporarily affect performance.
Image 7.1: Visual representation of the light's weather resistance features.
8 Issolvi l-problemi
If you encounter issues with your Linkind Solar Fence Lights, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx bil-lejl. | Insufficient sunlight exposure; switch is off; battery is depleted. | Ensure the light is placed in direct sunlight for 8-10 hours. Check if the operating mode is set to 'Lights Off' (Mode 3) and change it if necessary. Allow the battery to charge fully. |
| Id-dawl huwa baxx jew jibqa' mixgħul għal perjodu qasir biss. | Insufficient charging; dirty solar panel; aging battery. | Relocate the light to an area with more direct sunlight. Clean the solar panel regularly. If the issue persists after prolonged use, the battery may need replacement (contact support). |
| Is-senser tal-moviment mhux qed jaħdem jew huwa sensittiv wisq. | Sensor obstructed; incorrect mode selected; environmental interference. | Ensure the sensor lens is clean and unobstructed. Verify the light is in Mode 1 or Mode 2. Avoid installing near heat sources or reflective surfaces that might trigger the sensor. |
9. Informazzjoni dwar is-Sigurtà
- Do not disassemble or modify the product. This may cause damage and void the warranty.
- Żomm il-prodott 'il bogħod minn nar jew temperaturi għoljin.
- Do not immerse the product in water, despite its waterproof rating, to prevent potential damage to internal components.
- Dispose of batteries according to local regulations. Do not dispose of batteries in household waste.
- Ensure proper installation to prevent the light from falling and causing injury or damage.
10. Garanzija u Appoġġ
Linkind products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official Linkind websit.
