Chieftec BE-10B-300 Small Form Factor (SFF) Computer Case User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Chieftec BE-10B-300 Small Form Factor (SFF) computer case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage. Keep this manual for future reference.

2. Informazzjoni dwar is-Sigurtà

• Always disconnect the power cord from the wall outlet before opening the computer case or performing any installation or maintenance.
• Żgura ertjar xieraq biex tevita xokk elettriku.
• Handle all components with care to avoid damage from electrostatic discharge (ESD). Consider using an anti-static wrist strap.
• Keep the case away from sources of heat, direct sunlight, and moisture.
• Do not block ventilation openings to ensure adequate airflow and prevent overheating.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett. Jekk xi oġġetti huma neqsin jew bil-ħsara, ikkuntattja lill-bejjiegħ tiegħek.

• Chieftec BE-10B-300 SFF Computer Case
• Korda tal-Enerġija
• Accessory Kit (screws, standoffs, cable ties, small bracket)
• Manwal għall-Utent (dan id-dokument)

Figure 3.1: Included accessory kit with various screws, a power cable, and a small mounting bracket.

4. Prodott Aktarview

The Chieftec BE-10B-300 is a compact Small Form Factor (SFF) computer case designed for Mini ATX and Micro ATX motherboards. It features a sleek black design and includes a 300W power supply. The case supports various storage configurations and offers convenient front panel connectivity.

4.1 Esterni Views

Figura 4.1: Quddiem view of the Chieftec BE-10B-300 case, showcasing the optical drive bay, power button, and front I/O ports in a vertical setup.

Figura 4.2: Quddiem angolat view of the case, highlighting the textured front panel and accessible ports.

Figura 4.3: Fuq view of the case when oriented horizontally, showing the smooth top panel.

4.2 Tqassim Intern

Figura 4.4: Intern view of the case, illustrating the motherboard mounting area and the pre-installed cooling fan.

Figura 4.5: Intern ieħor view, detailing the drive bay structure and internal cabling.

Figura 4.6: Wara view of the case, showing expansion slots and a close-up of the tool-less lock mechanism for easy component installation.

5. Gwida ta' Setup

5.1 Preparazzjoni

1. Unpack the computer case and place it on a stable, flat surface.
2. Iġbor l-għodda meħtieġa: tornavit Phillips, ċinga tal-polz anti-statika (rakkomandata).

5.2 Ftuħ tal-Każ

Locate the thumbscrews or latches on the rear of the case that secure the side panel. Remove them and carefully slide the side panel backward, then lift it off.

5.3 Installazzjoni tal-Motherboard

1. Install the I/O shield provided with your motherboard into the opening at the rear of the case.
2. Align your Mini ATX or Micro ATX motherboard with the pre-installed standoffs inside the case.
3. Secure the motherboard using the appropriate screws from the accessory kit. Do not overtighten.

5.4 Installazzjoni tal-Provvista tal-Enerġija

The Chieftec BE-10B-300 comes with a pre-installed 300W power supply. Ensure all power cables are routed correctly and connected to your components as needed.

5.5 Installazzjoni tad-Drajv

The case supports 5.25" ultra-slim optical drives, 3.5" HDDs, and 2.5" SSDs. Refer to the diagram below for drive bay locations.

Figure 5.1: Drive bay configuration diagram, indicating mounting points for various storage devices.

1. 5.25" Ultra-Slim ODD (9.5 mm): Slide the optical drive into the designated bay from the front and secure it with screws or the tool-less mechanism if available.
2. 3.5" HDD / 2.5" SSD: Mount the drives into the appropriate brackets or bays as shown in Figure 5.1. Secure them with screws.

5.6 Installazzjoni tal-Karta tal-Espansjoni

Remove the necessary expansion slot covers from the rear of the case. Insert your expansion card (e.g., graphics card, network card) into the motherboard's PCIe slot and secure it using the tool-less lock mechanism or a screw.

5.7 Ġestjoni tal-Cable

Route all cables (power, data, front panel) neatly to ensure optimal airflow and a clean build. Use cable ties from the accessory kit to bundle cables.

5.8 Għeluq tal-Każ

Once all components are installed and cables are managed, carefully slide the side panel back into place and secure it with the thumbscrews or latches.

6. Istruzzjonijiet Operattivi

6.1 Tixgħel/Jitfi

1. Connect the power cord to the power supply unit and a wall outlet.
2. Press the power button located on the front panel of the case to turn on your computer.
3. To turn off, use the operating system's shutdown function or press and hold the power button for several seconds.

6.2 Konnessjoni tal-Periferali

Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports on the rear I/O panel of your motherboard and the front I/O panel of the case.

7. Manutenzjoni

7.1 Tindif

• Naddaf regolarment il-barra tal-kaxxa b'ċarruta ratba u damp drapp. Evita cleaners li joborxu.
• Periodically open the case and use compressed air to remove dust buildup from internal components, especially fans and heatsinks, to maintain optimal cooling performance.

8 Issolvi l-problemi

Jekk tiltaqa' ma' problemi, irreferi għall-passi komuni li ġejjin għas-soluzzjoni tal-problemi:

• Ebda Qawwa: Ensure the power cord is securely connected to both the wall outlet and the power supply. Check the power switch on the power supply itself.
• Ebda Display: Verify that your monitor is connected to the correct video output port on your graphics card or motherboard and that the monitor is powered on.
• Instabbiltà tas-Sistema: Check all internal cable connections (power, data, motherboard headers) to ensure they are firmly seated. Verify that all components are properly installed.
• Is-sħana żejda: Ensure all case fans are spinning and not obstructed. Clean any dust buildup from fans and heatsinks.

Għal kwistjonijiet aktar kumplessi, ikkonsulta l-manwali tal-komponenti tiegħek jew fittex assistenza professjonali.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

10.1 Informazzjoni dwar Garanzija

Chieftec products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Chieftec websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

10.2 Appoġġ Tekniku

If you encounter any issues that cannot be resolved using the troubleshooting guide in this manual, please contact Chieftec customer support or your retailer for assistance. Contact information can typically be found on the Chieftec webis-sit jew fuq l-imballaġġ tal-prodott tiegħek.