1. Introduzzjoni
Welcome to the instruction manual for your BBOUNDER 10 Pack Linkable LED Utility Shop Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
2. Informazzjoni dwar is-Sigurtà
Biex tiżgura tħaddim sikur u tevita ħsara, jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin:
- Dejjem skonnettja l-enerġija qabel ma tinstalla, tagħmel manutenzjoni, jew tnaddaf l-apparat.
- Tippruvax timmodifika jew tiżżarma l-apparat tad-dawl. Ġewwa m'hemm l-ebda partijiet li jistgħu jiġu rranġati mill-utent.
- Żgura li s-sors tal-enerġija voltage jaqbel mar-rekwiżiti tal-apparat tad-dawl (120 Volts).
- Install in accordance with all national and local electrical codes. If unsure, consult a qualified electrician.
- Do not install near heat sources or in excessively damp ambjenti.
- Avoid direct eye exposure to the light source when illuminated, as it is very bright.
- Handle the fixtures with care to prevent damage to the light tubes.
3. Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:
- BBOUNDER 4FT LED Utility Shop Lights (10 units)
- 56-inch Power Cord with Plug (10 units)
- 10-inch Hanging Chains (20 units, 2 per light)
- Ceiling Hooks (20 units, 2 per light)
- Mounting Screws (20 units, 2 per light)
- Plastic Anchors (20 units, 2 per light)
Figure 3.1: Included mounting hardware and power cord.
4. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Temperatura tal-Kulur | 6500 Kelvin (Cool Daylight) |
| Luminożità | 4400 Lumens |
| Wattage | 40 Watts (Equivalent to 250W fluorescent) |
| Voltage | 120 Volts |
| Tip ta' Sors tad-Dawl | LED |
| Materjal | Polikarbonat (PC) |
| Tip Finish | Trab Miksija |
| Forma | Linear ("D" shaped tube) |
| Dimensjonijiet tal-Prodott | 46.85"T x 6.38"W x 7.28"Għ |
| Piż tal-oġġett | 9.02 liri (għall-pakkett) |
| Ħajja Medja | 50,000 Sigħat |
| Tip ta 'Immuntar | Hanging or Surface Mounted |
| Dimmable | No (Not Dimmable) |
| CRI | 82 |
Figura 4.1: Aktarview of product specifications.
5. Setup u Installazzjoni
These LED shop lights offer versatile installation options, including surface mounting and suspension mounting. Choose the method best suited for your application.
5.1. Installazzjoni tal-Immonta tal-wiċċ
- Identify the desired mounting location. Mark the positions for the mounting screws, ensuring they align with the keyholes on the back of the fixture. The fixture dimensions are 46.85 inches in length.
- Drill pilot holes at the marked locations. If mounting into drywall, insert the plastic anchors.
- Screw the mounting screws into the pilot holes, leaving a small gap between the screw head and the surface.
- Align the keyholes on the back of the fixture with the screw heads and slide the fixture into place. Tighten the screws to secure the fixture.
5.2. Suspension Mount Installation
- Determine the desired hanging height and location.
- Screw the ceiling hooks into a sturdy ceiling joist or appropriate anchor points.
- Attach the hanging chains to the ceiling hooks and to the mounting points on the top of the light fixture.
- Adjust the chain length to achieve the desired height and level the fixture.
Figure 5.1: Suspending and Ceiling Mounting Options.
5.3. Daisy-Chain Linkability
These lights are designed for daisy-chain linking, allowing you to connect up to 4 lights seamlessly from a single power source. This feature helps in reducing wiring complexity and saving energy.
- Connect the power cord of the first light to a standard 120V outlet.
- Use the included linkable connectors to connect the output end of the first light to the input end of the second light.
- Repeat this process for up to 4 lights in a single chain.
- Kun żgur li l-konnessjonijiet kollha huma siguri qabel ma tixgħel.
Figure 5.2: Daisy-Chain Connection.
Figure 5.3: Installed LED Shop Lights in a Garage Environment.
6. Istruzzjonijiet Operattivi
Operating your BBOUNDER LED shop lights is straightforward:
- Power On/Off: Once installed and connected to a power outlet, use the in-line switch on the power cord to turn the lights on or off.
- Luminożità: The lights provide 4400 lumens of 6500K cool daylight illumination, ideal for workshops, garages, and other utility areas.
- Mhux Dimmable: These fixtures are not designed for use with dimmer switches. Connecting them to a dimmer may cause damage or malfunction.
Figure 6.1: In-line Power Switch.
Figure 6.2: BBOUNDER LED Utility Shop Lights.
7. Manutenzjoni
The BBOUNDER LED shop lights are designed for long-lasting performance with minimal maintenance.
- Tindif: Ensure the fixture is turned off and unplugged before cleaning. Use a soft, dry cloth to wipe down the surface. Do not use abrasive cleaners or solvents, as they may damage the finish or polycarbonate material.
- Durabilità: The unique "D" shaped tube design enhances durability, reducing issues like bending tubes, dark spots, and premature failure often seen in conventional tubes.
- Ebda Sostituzzjoni tal-Bozza: As integrated LED fixtures, there are no bulbs to replace. The entire unit is designed for a long operational life of approximately 50,000 hours.
Figure 7.1: "D" Shaped Tube for Enhanced Durability.
8 Issolvi l-problemi
If you encounter any issues with your BBOUNDER LED shop lights, refer to the following table for common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Bla enerġija, konnessjoni maħlula, swiċċ difettuż. | Check if the power cord is securely plugged into a working outlet. Ensure the in-line switch is in the "ON" position. Verify all linkable connections are secure. Test the outlet with another device. |
| Id-dawl teptip jew jitbaxxa. | Incompatible dimmer switch, unstable power supply, loose connection. | These lights are non-dimmable; ensure they are not connected to a dimmer switch. Check for stable power supply. Secure all connections. |
| Some lights in a daisy-chain are off. | Loose linkable connection, exceeding maximum linked lights. | Check the connection between the working light and the non-working light. Ensure you have not exceeded the maximum of 4 linked lights per chain. |
| Light produces buzzing sound. | Rare, but could indicate an internal component issue. | Disconnect power immediately. Contact customer support if the issue persists. |
If the problem persists after attempting these solutions, please contact BBOUNDER customer support.
9. Garanzija u Appoġġ
BBOUNDER is committed to providing high-quality products. For detailed warranty information and customer support, please refer to the following:
- Manwal tal-Utent (PDF): An official PDF user manual is available for download: Niżżel il-Manwal tal-Utent f'PDF
- Pjanijiet ta' Protezzjoni: Extended protection plans are available for purchase, offering additional coverage beyond the standard warranty. Options include 3-Year, 4-Year, and Complete Protect plans.
- Informazzjoni tal-Bejjiegħa: This product is fulfilled by Amazon and sold by Bbounder Lighting. For direct inquiries, you may visit the BBOUNDER Store on Amazon.
