Prodott Overview
The Frizzlife ASR412-1000G is a high-quality 0.0001-micron Reverse Osmosis (RO) membrane replacement filter cartridge designed specifically for the Frizzlife PD1000-TAM4 Under-Sink Reverse Osmosis Water Filter System. This filter serves as the 2nd stage in the PD1000-TAM4 system, crucial for advanced water purification.
Image: Frizzlife ASR412-1000G RO Replacement Filter Cartridge.
Karatteristiċi u Benefiċċji Ewlenin
- Filtrazzjoni Superjuri: Equipped with a 0.0001-micron RO membrane, it effectively removes 99.99% of over 1000 contaminants, including chlorine, lead, heavy metals, fluoride, mercury, VOCs, chloramine, and arsenic.
- Dedicated Replacement: This is the designated 2nd stage replacement filter for the Frizzlife PD1000-TAM4 Under-Sink Reverse Osmosis Water Filter System.
- Quick & Tool-Free Replacement: Designed for user convenience, the ASR412-1000G RO membrane can be replaced with a simple twist after shutting off the water supply, requiring no special tools.
- Ħajja twila: Under normal conditions, the filter is recommended for replacement every 2 years. Note that actual lifespan may vary based on feed water quality and daily usage.
Speċifikazzjonijiet
| Mudell tal-Filtru | ASR412-1000G |
| Compatible System Model | PD1000-TAM4 |
| Filtrazzjoni Stage | It-2 Stage (RO Membrane) |
| Preċiżjoni tal-Filtrazzjoni | 0.0001 Mikron |
| Materjal | Carbon Fiber (as part of composite filter) |
| Dimensjonijiet tal-Prodott | 11.43 x 11.43 x 38.61 ċm (madwar 4.5 x 4.5 x 15.2 pulzieri) |
| Piż tal-oġġett | 1.81 Kilogrammi (madwar 4 lbs) |
| Ħajja Stmata | Up to 2 years (depends on water quality and usage) |
| Ċertifikazzjonijiet | Ċċertifikat CE |
Kompatibilità
The ASR412-1000G filter is exclusively designed as the It-tieni stage RO filter for the Frizzlife PD1000-TAM4 Under-Sink Reverse Osmosis Water Filter System. Ensure your system is the PD1000-TAM4 model before purchasing this replacement filter.
Image: The ASR412-1000G RO filter (labeled 'RO') as the second stage in the Frizzlife PD1000-TAM4 system.
Immaġni: Fuqview of the three filter stages for the Frizzlife PD1000-TAM4 system, highlighting the ASR412-1000G as the RO filter (Stagu 2).
Istruzzjonijiet ta' Installazzjoni u Sostituzzjoni
Replacing the ASR412-1000G RO filter in your Frizzlife PD1000-TAM4 system is a quick and tool-free process. Follow these steps:
- Itfi l-Provvista tal-Ilma: Before beginning, locate the water supply valve to your Frizzlife PD1000-TAM4 system and turn it off completely. This prevents water leakage during filter replacement.
- Release Pressure (Optional but Recommended): Open the filtered water faucet to release any remaining pressure in the system. Close the faucet once water stops flowing.
- Neħħi l-Filtru l-Qadim: Identify the 2nd stage RO filter (labeled 'RO') on your PD1000-TAM4 system. Gently twist the old filter cartridge counter-clockwise until it detaches from the system head. Some residual water may drip out.
- Ipprepara Filtru Ġdid: Remove the new ASR412-1000G filter cartridge from its packaging. Ensure the O-rings are properly seated.
- Installa Filtru Ġdid: Align the new filter cartridge with the corresponding port on the system head (the 'RO' port). Insert the filter and twist it clockwise until it is securely locked into place. You should feel a click or firm stop.
- Irrestawra l-Provvista tal-Ilma: Slowly turn the water supply valve back on. Check for any leaks around the newly installed filter.
- Laħlaħ is-Sistema: Open the filtered water faucet and allow water to run for approximately 5-10 minutes to flush out any air and carbon fines from the new filter. This ensures optimal performance and taste.
Note: For detailed visual instructions, refer to the official Frizzlife PD1000-TAM4 system manual or visit the Frizzlife support websit.
Maintenance and Filter Lifespan
The Frizzlife ASR412-1000G RO filter cartridge has an estimated lifespan of up to 2 snin. However, the actual replacement period can vary significantly based on several factors:
- Kwalità tal-Ilma tal-Għalf: Water with higher levels of contaminants (e.g., sediment, chlorine, hardness) will reduce the filter's lifespan.
- Daily Water Consumption: Higher daily usage of filtered water will necessitate more frequent filter changes.
It is recommended to monitor your filtered water's taste and flow rate. A noticeable decrease in flow or a change in taste indicates that the filter may need to be replaced sooner than the estimated lifespan.
For optimal performance and continued access to high-quality purified water, adhere to the recommended replacement schedule or replace the filter when signs of reduced performance appear.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Water Leakage after Replacement | Filter not fully seated or O-rings misaligned/damaged. | Ensure the filter is twisted firmly into place. Remove and re-install, checking O-rings for proper seating or damage. |
| Low Water Flow Rate | Air trapped in the system; filter not fully flushed; filter nearing end of life. | Flush the system for 5-10 minutes. If the issue persists, the filter may be clogged and require replacement. |
| Togħma/Riħa spjaċevoli | New filter not adequately flushed; filter has reached end of life. | Flush the system for a longer period (up to 15-20 minutes). If taste/odor persists, the filter needs replacement. |
Appoġġ u Informazzjoni ta' Kuntatt
For further assistance, detailed product information, or to purchase additional replacement filters, please visit the official Frizzlife websit jew ikkuntattja lill-appoġġ tal-klijenti tagħhom.
- Uffiċjali Websit: www.frizzlife.com
- Brand Store on Amazon: Frizzlife Solutions
Please have your product model (ASR412-1000G) and the system model (PD1000-TAM4) ready when contacting support for efficient service.
