Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Prodott Aktarview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

Figura 1: Quddiem view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Karatteristiċi ewlenin

• Programmabbli kull Ġimgħa: Allows up to 16 ON/OFF programs per day or week.
• Multi-funzjonali: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Kapaċità Għolja: Jappoġġja 16 Amp / 220 Volt AC loads.
• Voltage Kompatibilità: Operates with 220V, 230V, 240V AC.
• Batterija inkorporata: Iżomm is-settings waqt l-enerġijatages (Lithium battery type).
• Applikazzjonijiet versatili: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. Speċifikazzjonijiet

4. Installazzjoni

Avviż Importanti dwar is-Sigurtà: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. Immuntar: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Wiring: Refer to the wiring diagram on the back of the unit.
   

   Figura 2: Lura view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • Terminal 3: Komuni (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Qawwa Mixgħul: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Istruzzjonijiet Operattivi

5.1. Funzjonijiet tal-buttuna

• ARLOĠĠ: Użat biex jiġi ssettjat il-ħin u l-jum attwali.
• PROG: Enters/exits programming mode for ON/OFF schedules.
• IL-ĠIMGĦA: Selects the day(s) of the week during time or program setting.
• SIEGĦA: Adjusts the hour during time or program setting.
• MIN: Adjusts the minute during time or program setting.
• FAKAR: Recalls or cancels a program setting.
• MANWAL: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Reset): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Issettjar tal-Ħin u l-Jum Kurrenti

1. Agħfas u żomm il- ARLOĠĠ buttuna.
2. Waqt li żżomm ARLOĠĠ, agħfas ĠIMGĦA to set the current day (MO, TU, WE, TH, FR, SA, SU).
3. Waqt li żżomm ARLOĠĠ, agħfas SIEGĦA biex tissettja s-siegħa kurrenti.
4. Waqt li żżomm ARLOĠĠ, agħfas MIN biex tissettja l-minuta kurrenti.
5. Irrilaxxa l- ARLOĠĠ buttuna biex issalva s-settings.

5.3. Programming ON/OFF Schedules

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Agħfas il- PROGRAMM Agħfas il-buttuna darba. Id-displej se juri "1 ON".
2. Agħfas ĠIMGĦA repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Agħfas SIEGĦA biex tissettja s-siegħa mixgħula mixtieqa.
4. Agħfas MIN biex tissettja l-minuta ON mixtieqa.
5. Agħfas PROGRAMM għal darb'oħra. Id-displej se juri "1 OFF".
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Agħfas PROGRAMM to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. To exit programming mode and save settings, press the ARLOĠĠ buttuna.

5.4. Override Manwali

Agħfas il- MANWAL buttuna biex tiċċikla bejn il-modi tal-ħruġ:

• FUQ: L-output huwa kontinwament mixgħul, u jinjora l-programmi.
• AUTO: Output follows the programmed schedules.
• MITFI: L-output huwa kontinwament MITFI, u jinjora l-programmi.

Kun żgur li t-tajmer huwa mixgħul AUTO mode for programmed operation.

5.5. Resetting the Timer

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. Manutenzjoni

The Sinotimer TM618N-2 requires minimal maintenance.

• Żomm l-apparat nadif u ħieles mit-trab. Uża drapp artab u niexef għat-tindif.
• Tużax tindif jew solventi li joborxu.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7 Issolvi l-problemi

8. Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

Manufacturer: Sinotimer