1. Introduzzjoni
This manual provides detailed instructions for the assembly, operation, and maintenance of your AZZA Pyramid L 4.0 PC Case. Designed for enthusiasts, this ATX mid-tower case features tempered glass panels on all sides, support for PCIe 4.0, and includes a 120mm AZZA Hurricane III ARGB fan. Please read these instructions carefully before beginning assembly to ensure proper installation and optimal performance.
Karatteristiċi ewlenin:
- All-sided tempered glass construction for a panoramic view tal-komponenti interni.
- Integrated PCIe 4.0 riser cable for vertical GPU mounting.
- Front I/O panel with USB Type-C port for modern connectivity.
- Includes one 120mm AZZA Hurricane III ARGB fan for enhanced cooling and aesthetics.
- Unique pyramid design for distinctive system presentation.
2. Speċifikazzjonijiet
| Brand | AZZA |
| Numru tal-Mudell | CSAZ-804L, PYRAMID L 4.0 |
| Dimensjonijiet tal-Prodott | 19.29 x 19.29 x 23.03 pulzieri (L x W x H) |
| Piż tal-oġġett | 31.09 Liri |
| Appoġġ tal-Motherboard | ATX, Micro-ATX, Mini-ITX (EATX support implied by PCIe 4.0 cable description in image) |
| Approvazzjoni tal-GPU | Up to 330 mm (length) |
| Għoli tal-CPU Cooler | Sa 95 mm |
| Appoġġ għall-Provvista tal-Enerġija | Standard ATX PSU (length not specified, but implied by case size) |
| Drive Bays | 2 x 2.5" SSD, 1 x 3.5" HDD (or 1 x 2.5" SSD) |
| Appoġġ tal-fann | Supports 3 x 120mm fans (bottom) |
| Appoġġ tar-radjatur | Supports 240mm or 360mm radiators (bottom) |
| Fan Inkluż | 1 x 120mm AZZA Hurricane III ARGB Fan |
| I/O quddiem | USB Type-C, USB 3.0, HD Audio |
Figure 1: AZZA Pyramid L PC Case dimensions (490mm W x 490mm D x 589mm H).
3. Setup u Installazzjoni
Follow these steps to assemble your AZZA Pyramid L 4.0 PC case and install your components. Ensure all power is disconnected before beginning any installation.
3.1. Case Disassembly
The AZZA Pyramid L 4.0 is designed for easy disassembly to facilitate component installation. The tempered glass side panels can be removed by unscrewing the thumb screws.
Figure 2: Illustration of the case's easy disassembly process.
3.2. Motherboard and CPU Cooler Installation
Install your motherboard onto the designated tray. Ensure proper alignment with the standoffs. The case supports CPU coolers up to 95mm in height.
Figure 3: CPU cooler height and GPU dimensions within the case.
3.3. Installazzjoni tal-Kard Grafika
The AZZA Pyramid L 4.0 includes a PCIe 4.0 riser cable for vertical GPU mounting. Install your graphics card into the riser cable and secure it. The case supports GPUs up to 330mm in length.
Figure 4: GPU length compatibility and PCIe 4.0 riser cable.
3.4. Installazzjoni tad-Drajv tal-Ħażna
The case provides mounting points for two 2.5" SSDs and one 3.5" HDD (or an additional 2.5" SSD). Secure your storage devices in the designated bays.
Figure 5: Storage drive mounting locations and cooling options.
3.5. Installazzjoni tas-Sistema tat-tkessiħ
The AZZA Pyramid L 4.0 supports up to three 120mm fans or a 240mm/360mm radiator at the bottom. An AZZA Hurricane III ARGB fan is included. Install additional fans or radiators as desired for optimal airflow.
Figure 6: Cooling system installation points for fans and radiators.
3.6. Installazzjoni ta 'Provvista ta' Enerġija
Install your ATX power supply into its designated compartment. Route all necessary cables through the cable management cutouts to maintain a clean build.
3.7. Ġestjoni tal-Kejbil
Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. Proper cable management improves airflow and aesthetics.
3.8. Assemblea Finali
Once all components are installed and cables are managed, reattach the tempered glass side panels and secure them with the thumb screws.
Figura 7: Eżample of a fully assembled system within the AZZA Pyramid L PC case.
4. Kif Tħaddem il-Kaxxa tal-PC Tiegħek
4.1. Power On/Off
Connect your power cable to the power supply and a wall outlet. Press the power button located on the front I/O panel to turn your system on or off.
4.2. Portijiet I/O ta' Quddiem
The front I/O panel provides convenient access to USB Type-C, USB 3.0, and HD Audio ports for connecting peripherals and accessories.
4.3. Kontroll tad-Dawl ARGB
The included AZZA Hurricane III ARGB fan can be controlled via your motherboard's ARGB software (if supported) or a dedicated RGB controller (if included with your system or purchased separately) to customize lighting effects.
5. Manutenzjoni
5.1. Tindif
Naddaf regolarment il-barra tal-kaxxa b'ċarruta ratba u damp cloth. For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks. Use compressed air to remove dust from fans and internal components. Ensure the system is powered off and unplugged before cleaning.
5.2. Filtri tat-Trab
Check and clean any removable dust filters periodically to maintain optimal airflow and prevent dust buildup inside the case.
6 Issolvi l-problemi
6.1. Is-Sistema Mhux Qed Tixgħel
- Verify all power cables are securely connected to the power supply, motherboard, and components.
- Kun żgur li s-swiċċ tal-provvista tal-enerġija jkun fil-pożizzjoni "ON".
- Iċċekkja l-konnessjonijiet tal-header tal-pannell ta' quddiem mal-motherboard (Power SW, Reset SW).
6.2. Kwistjonijiet ta' Tisħin Żejjed
- Ensure all case fans are spinning correctly and are oriented for proper airflow (intake/exhaust).
- Clean dust filters and internal components to prevent airflow obstruction.
- Verify CPU cooler and GPU fans are functioning.
7. Garanzija u Appoġġ
For warranty information, technical support, or replacement parts, please refer to the official AZZA webis-sit jew ikkuntattja lill-bejjiegħ tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Optional protection plans are available for purchase separately to extend coverage beyond the manufacturer's warranty. Please consult the product listing or your retailer for details on available protection plans.
