Prodott Overview
The MOUNTUP Single Monitor Wall Mount (Model MU2003-AU) is designed to securely hold a single computer screen on a wall, freeing up desk space and allowing for flexible viewing angles. This gas spring monitor arm supports most flat or curved monitors up to 32 inches, with a weight capacity ranging from 4.4 to 19.8 pounds. It is compatible with VESA patterns 75x75mm and 100x100mm. The mount is suitable for installation on wood studs, brick, and concrete walls, but it is not intended for drywall-only applications.
Image: The MOUNTUP Single Monitor Wall Mount, showcasing its sleek black design and articulated arm. This mount provides a space-saving solution by elevating your monitor off the desk.
Kompatibilità tal-wiri
Before installation, ensure your monitor meets the following compatibility requirements:
- Daqs tal-iskrin: Fits most flat or curved computer screens up to 32 inches.
- Kapaċità tat-Tagħbija: Supports displays weighing between 4.4 pounds (2 kg) and 19.8 pounds (9 kg).
- Mudell VESA: Compatible with VESA mounting patterns of 75x75mm and 100x100mm. Verify the four screw holes on the back of your monitor. If your monitor has a different VESA pattern, an adapter may be required (not included).
Image: Visual representation of the monitor mount's compatibility, highlighting the maximum load capacity (4.4-19.8 lbs), VESA compatibility (75x75mm, 100x100mm), and maximum screen size (32 inches).
Setup u Installazzjoni
Carefully follow these steps to install your MOUNTUP Single Monitor Wall Mount. It is recommended to have a second person assist during certain stages tal-installazzjoni.
1. Wall Compatibility
This monitor mount is designed for installation on solid wood studs, concrete walls, or brick walls. DO NOT mount on drywall alone.
Image: Illustrates the types of walls suitable for installation: wood stud, concrete wall, and brick wall. It explicitly warns against mounting on drywall without a stud.
2. Attaching Arm Assembly to Wall
Locate a suitable mounting position on your chosen wall type. Use a stud finder to accurately locate the center of a wood stud if applicable. Mark the pilot holes for drilling.
Drill pilot holes according to the manual's specifications for your wall type. Secure the arm assembly to the wall using the provided lag bolts and washers. Ensure the assembly is level before fully tightening.
Video: MOUNTUP Single Monitor Wall Mount MU2003 Installation Guide. This video provides a comprehensive step-by-step guide for installing the monitor arm assembly to the wall, including locating studs, drilling pilot holes, and securing the mount.
Image: Shows the built-in gas spring mechanism and the quick-release VESA plate, which simplifies the process of attaching and detaching the monitor.
3. Attaching Monitor to VESA Plate
Attach the VESA plate to the back of your monitor using the appropriate screws and washers provided. Ensure the plate is securely fastened to the monitor's VESA mounting holes.
4. Mounting Monitor onto Arm
Carefully slide the monitor (with the attached VESA plate) onto the head of the swivel arm. Ensure it clicks securely into place. Install the security bolt to prevent accidental dislodgement.
Tħaddim u Aġġustamenti
The MOUNTUP monitor arm offers full motion capabilities for optimal viewing comfort and ergonomic positioning.
1. Aġġustament tat-Tensjoni tal-Mola tal-Gass
The gas spring tension needs to be adjusted to match your monitor's weight. This ensures the arm can hold the monitor at any desired height without drifting up or down.
- Jekk il-monitor jaqa': Turn the screw counter-clockwise ("+") direction to increase gas spring tension for a heavier monitor.
- Jekk il-monitor rises up: Turn the screw clockwise ("-") direction to reduce gas spring tension for a lighter monitor.
Hold the arm in a horizontal position while making adjustments. Refer to the table in the image for approximate turns based on monitor weight.
Video: MOUNTUP Gas Spring Tension & Tilting Adjustment Guide MU2003. This video demonstrates how to adjust the gas spring tension to ensure the monitor arm holds your display securely at any height.
Immaġni: Dettaljata view of the gas spring adjustment screw and the tilt angle adjustment bolt, with instructions on how to modify tension and angle.
2. Tilt Angle Adjustment
To adjust the monitor's tilt angle (up 90° / down 45°):
- Ħoll il-bolt li jmejjel.
- Adjust the monitor to your desired angle.
- Retighten the tilting bolt to secure the position.
3. Swivel and Rotation
The monitor arm allows for extensive movement:
- Dawwar: The arm can swivel up to 270° at the wall plate and 180° at the monitor connection point, allowing you to easily share your screen or adjust your viewAngolu ta' ing minn pożizzjonijiet differenti fil-kamra.
- Rotazzjoni: The monitor can rotate 360° (from landscape to portrait orientation) without removing it from the mount.
- Aġġustament Għoli: The gas spring arm provides up to 12.2 inches of vertical height adjustment, allowing you to position your monitor at an ergonomic eye level.
Image: Demonstrates the full range of motion, including height adjustment (12.2 inches), 360° rotation, 180° swivel at two points, and tilt angles (+90°/-90°).
Video: MOUNTUP Single Monitor Wall Mount MU2003 Function Display. This video showcases the various movements and adjustments possible with the monitor arm, including extension, swivel, tilt, and rotation.
4. Ġestjoni tal-Kejbil
Integrated cable management clips help keep your workspace tidy by routing cables along the arm. Open the clips, insert your cables, and close them to secure.
Image: Before and after comparison showing how the monitor arm helps create a clutter-free and ergonomically optimized workspace.
Manutenzjoni
To ensure the longevity and optimal performance of your MOUNTUP monitor arm, regular maintenance is recommended:
- Tindif: Imsaħ il-muntatura b'ċarruta ratba u damp drapp. Evita li tuża prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
- Spezzjoni: Periodically check all bolts and connections to ensure they are secure. Retighten if necessary.
- Rebbiegħa tal-Gass: If the monitor arm's movement becomes stiff or too loose over time, re-adjust the gas spring tension as described in the "Operating and Adjustments" section.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Monitor arm does not hold position (drifts up or down). | Incorrect gas spring tension for monitor weight. | Adjust the gas spring tension using the included hex key. Turn counter-clockwise to increase tension for heavier monitors, or clockwise to decrease tension for lighter monitors. Refer to the "Gas Spring Tension Adjustment" section. |
| Monitor tilts forward or backward excessively. | Tilting bolt is too loose. | Retighten the tilting bolt on the VESA plate connection point. Refer to the "Tilt Angle Adjustment" section. |
| Arm feels stiff or difficult to move. | Gas spring tension is too high or joints are tight. | Reduce gas spring tension slightly. Apply a small amount of silicone lubricant to the arm's pivot points if necessary. |
| Monitor is not level after installation. | Arm assembly not perfectly level during wall mounting. | Slightly loosen the wall mounting bolts, adjust the arm assembly to be level, and then retighten the bolts securely. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Dimensjonijiet tal-Prodott | 2.76 x 8.66 x 14.57 pulzieri |
| Piż tal-oġġett | 4.18 liri |
| Numru tal-Mudell tal-Oġġett | MU2003-AU |
| Tip ta 'Immuntar | Mount Wall |
| Tip ta' Moviment | Mejjel, Dawwar, Dawwar, Aġġusta l-Għoli, Mozzjoni Sħiħa |
| Brand | MONTAĠĠ |
| Materjal | Aluminju |
| Daqs Massimu Kompatibbli | 32 Pulzier |
| Daqs Minimu Kompatibbli | 17 Pulzier |
| Kompatibilità VESA | 75x75mm, 100x100mm |
| Kapaċità tal-piż | 4.4-19.8 lbs |
| Angolu ta 'Mejjel Massimu | 90 Degrees (Up) / 45 Degrees (Down) |
| Kulur | Iswed |
| Manifattur | MONTAĠĠ |
| Pajjiż ta' Oriġini | Iċ-Ċina |
| Data L-Ewwel Disponibbli | 28 ta’ Ġunju 2022 |
Garanzija u Appoġġ
MOUNTUP provides 3-year support for this monitor mount, reflecting confidence in its construction, strength, and durability. For any pre-purchase questions, installation assistance, or support needs, please do not hesitate to contact MOUNTUP customer service.
Għal aktar riżorsi, tista' tirreferi għall-uffiċjal Manwal tal-Installazzjoni (PDF) u Manwal għall-Utent (PDF) disponibbli online.
