1. Introduzzjoni
The Splenssy Tuya Micro DC 5V Smart WiFi Adaptor is designed to add smart control capabilities to your USB-powered devices. This compact adaptor allows you to remotely manage power to connected devices via a smartphone application, voice commands through compatible smart assistants like Alexa and Google Home, and scheduled operations. It also features overcharge protection to safeguard your devices.
Figure 1: The Splenssy Smart WiFi Adaptor in use, connected to a power strip and charging a smartphone.
2. Istruzzjonijiet ta' Setup
2.1. Kontenut tal-Pakkett
- Splenssy Tuya Micro DC 5V Smart WiFi Adaptor
- Manwal għall-Utent (dan id-dokument)
2.2. App Download
To control your smart adaptor, download the Tuya Smart or Ħajja Intelliġenti application from your device's app store (available on iOS and Android). Fittex għal "Tuya Smart" or "Smart Life" and install the application.
2.3. Tqabbil tal-Apparat
- Qawwa Mixgħul: Plug the Splenssy Smart WiFi Adaptor into a standard USB power source (e.g., a USB wall charger, power bank, or computer USB port).
- Daħħal il-Mod tat-Tqabbil: Press and hold the button on the adaptor for approximately 5 seconds until the indicator light begins to flash rapidly. This indicates the device is ready for pairing.
- Żid Apparat fl-App: Open the Tuya Smart or Smart Life app on your smartphone. Ensure your phone is connected to a 2.4GHz Wi-Fi network. Tap the "+" icon in the top right corner to add a new device.
- Agħżel it-Tip ta' Apparat: The app may automatically detect the device. If not, manually select "Electrical" > "USB Wi-Fi Plug" or a similar category.
- Ikkonferma l-Indikatur li Jteptep: Follow the in-app prompts, confirming that the indicator light on the adaptor is flashing rapidly.
- Qabbad mal-Wi-Fi: Enter your 2.4GHz Wi-Fi network password when prompted. The app will then attempt to connect to the adaptor.
- Tlestija: Once connected, the indicator light on the adaptor will stop flashing and remain solid. You can then rename the device within the app for easier identification.
Note: If pairing fails, ensure your Wi-Fi network is 2.4GHz, the password is correct, and the device is close to your router. You may need to reset the adaptor by unplugging and replugging it, then repeating the pairing steps.
Figure 2: Key features of the Splenssy Smart WiFi Adaptor.
3. Istruzzjonijiet Operattivi
3.1. Kontroll mill-bogħod permezz tal-App
After successful pairing, you can control the adaptor from anywhere using the Tuya Smart or Smart Life app. Tap on the device in the app to access its control interface, where you can toggle power on/off, set schedules, and configure other smart features.
Figure 3: Remote control of the adaptor via the smartphone app.
3.2. Kontroll tal-Vuċi b'Alexa u Google Home
The adaptor is compatible with Amazon Alexa and Google Home for voice control. To enable this feature:
- Kontijiet tal-Kontijiet: Fl-app Alexa jew Google Home, mur fis-sezzjoni "Skills" jew "Works with Google". Fittex għal "Tuya Smart" or "Smart Life" and enable the skill.
- Awtorizza: Log in with your Tuya Smart/Smart Life account credentials to link the accounts.
- Skopri Mezzi: Ask your smart assistant to discover devices (e.g., "Alexa, discover my devices" or "Hey Google, sync my devices").
- Kmandi bil-vuċi: Once discovered, you can use voice commands such as "Alexa, turn on [device name]" or "Hey Google, turn off [device name]".
Figure 4: Using voice control with Alexa to operate the smart adaptor.
3.3. Scheduling Features
Set schedules within the app to automatically turn devices on or off at specific times. This is useful for automating lights, fans, or other USB-powered gadgets.
Figura 5: Eżample of setting a daily schedule for the adaptor.
3.4. Protezzjoni ta 'ħlas żejjed
The adaptor can be configured to stop charging devices automatically once they reach 100% charge. This feature helps prevent overcharging, which can extend the lifespan of your device batteries.
Figure 6: Overcharge protection feature for connected devices.
3.5. Użu Ġenerali
Connect any USB-powered device, such as LED strip lights, desk lamps, USB fans, or small humidifiers, to the adaptor's USB output port. The adaptor will then provide smart control over that device's power supply.
Figure 7: The adaptor powering a desk lamp.
Figure 8: The adaptor controlling an LED strip light.
Figura 9: Eżamples of devices compatible with the smart adaptor.
4. Manutenzjoni
4.1. Tindif
To clean the adaptor, disconnect it from the power source and wipe it gently with a dry, soft cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.
4.2. Ħażna
Store the adaptor in a cool, dry place away from direct sunlight and extreme temperatures. Avoid environments with high humidity or dust.
4.3. Prekawzjonijiet tas-Sigurtà
- Do not disassemble or modify the adaptor.
- Żomm 'il bogħod mill-ilma u likwidi oħra.
- Ensure the connected USB device's power requirements do not exceed the adaptor's specifications.
- Use only with appropriate USB power sources.
5 Issolvi l-problemi
If you encounter issues with your Splenssy Smart WiFi Adaptor, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Device not pairing / Indicator light not flashing. | Not in pairing mode; insufficient power. | Ensure the adaptor is plugged into a stable 5V USB power source. Press and hold the button for 5 seconds until the light flashes rapidly. Try unplugging and replugging the device. |
| Cannot connect to Wi-Fi / Frequent disconnections. | Incorrect Wi-Fi password; 5GHz Wi-Fi network; weak signal. | Verify your Wi-Fi password. Ensure your router is broadcasting a 2.4GHz network and your phone is connected to it during setup. Move the adaptor closer to your Wi-Fi router. |
| Il-kontroll tal-vuċi (Alexa/Google Home) mhux qed jaħdem. | Accounts not linked; device not discovered; incorrect commands. | Check that your Tuya Smart/Smart Life account is correctly linked in the Alexa/Google Home app. Ask your smart assistant to discover devices. Use the exact device name configured in the app. |
| Scheduled tasks not executing. | Device offline; incorrect schedule settings. | Ensure the adaptor is connected to Wi-Fi and online in the app. Verify the schedule settings (times, days) are correct. |
| Device unresponsive, indicator light solid blue, cannot manually toggle. | Internal error; firmware issue. | Try a hard reset by unplugging the device for 30 seconds and then plugging it back in. If the issue persists, contact customer support. |
6. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Dimensjonijiet tal-Prodott | 1.77 x 1.2 x 1.02 pulzieri (4.5 x 3.0 x 2.6 ċm) |
| Piż tal-oġġett | 2.08 uqija (0.06 Kilogrammi) |
| Numru tal-Mudell | QGH7007721010914LY |
| Brand | Splenssy |
| Interface tal-Ħardwer | USB |
| Kulur | Abjad |
| Apparati Kompatibbli | Desktop, Smartphone (USB-powered devices) |
| Protokoll tal-Kollegament tad-Data | IEEE 802.11b (2.4GHz Wi-Fi) |
| Familja ta' Sistemi Operattivi Kompatibbli | Android (and iOS via Tuya Smart/Smart Life app) |
7. Informazzjoni dwar Garanzija
Specific warranty details for the Splenssy Tuya Micro DC 5V Smart WiFi Adaptor may vary by region and retailer. Please refer to the warranty card included with your product or contact the seller/manufacturer directly for comprehensive warranty terms and conditions.
8. Appoġġ għall-Klijent
For further assistance, technical support, or inquiries regarding your Splenssy Smart WiFi Adaptor, please contact the retailer from whom you purchased the product or visit the official Splenssy website for contact information. You may also find helpful resources within the Tuya Smart or Smart Life application's help section.