1. Introduzzjoni
Thank you for choosing the JKING Electric Skateboard Model Jupiter-02. This manual provides essential information for the proper setup, operation, and maintenance of your electric longboard. Please read it thoroughly before your first ride to ensure safety and optimal performance.
The JKING Electric Skateboard features a 900W hub-motor, a top speed of 26 MPH, and a range of 19.5-21.8 miles. It is designed for adults aged 16 and above, with a maximum load capacity of 330 lbs.
2. Informazzjoni dwar is-Sigurtà
- Always wear protective gear: This includes a helmet, knee pads, elbow pads, and wrist guards.
- Restrizzjonijiet tal-Età u l-Piż: This skateboard is intended for users aged 16 and above. The maximum supported weight is 330 lbs (150 kg).
- Kundizzjonijiet Ambjentali: The board has an IP64 water resistance rating, meaning it is resistant to splashing water and dust. Avoid riding in heavy rain, through puddles, or in wet conditions to prevent damage to electronic components.
- Kontroll ta' Qabel is-Sewqan: Before each use, inspect the skateboard for any loose components, wheel damage, or battery issues. Ensure the remote control is fully charged.
- Ifhem l-Inħawi Tiegħek: Ride in safe, open areas away from traffic, pedestrians, and obstacles. Be aware of your surroundings and local regulations regarding electric skateboards.
- Ibbrejkjar: Practice braking at various speeds to understand the board's stopping capabilities.
- Kontroll tal-veloċità: Start with the lowest speed mode and gradually increase as you become comfortable with the board's handling.
- Sigurtà tal-Iċċarġjar: Use only the provided charger. Do not overcharge the battery.
3. Komponenti tal-Prodott
The JKING Electric Skateboard Model Jupiter-02 comes with the following main components:
- Electric Skateboard (Deck, Trucks, Wheels, Hub Motors, Battery Enclosure)
- Kontroll mill-bogħod mingħajr fili
- Power Adapter and Charging Cable for Skateboard
- Type-C Charging Cable for Remote Control
- Għodda T għall-aġġustamenti
- Manwal għall-Utent (dan id-dokument)
Figura 3.1: JKING Electric Skateboard showing top, side, and bottom views. The top features a non-slip grip tape with the JKING logo. The side highlights the board's profile and LED light strips. The bottom shows the battery enclosure, hub motors, and warning labels.
Figura 3.2: Close-up view of the JKING Electric Skateboard's underside, highlighting the ON/OFF button, power jack for charging, and the forward and reverse hub motors.
Figura 3.3: Diagram of the JKING Electric Skateboard remote control, indicating the LCD Display, Power Buttons, Mode Control Key, Direction Control Key, and Type-C Charging Port. The LCD display shows Speedometer, Remote Control Battery SOC, Speed Gear Level, Odometry, Speed Units, Skateboard Battery SOC, Brake Gear Level, and Trip Mileage.
4. Twaqqif u Użu Inizjali
4.1 Spakkjar u Spezzjoni
Carefully remove all components from the packaging. Inspect the skateboard and accessories for any signs of damage. Ensure all listed components are present.
Figura 4.1: The JKING Electric Skateboard and its included accessories, including the remote control, charger, T-tool, and user manual. The image also shows the board's dimensions: 38.2 inches length, 10.0 inches width, and 5.3 inches height.
4.2 Charging the Skateboard
- Locate the power jack on the underside of the skateboard (refer to Figure 3.2).
- Connect the power adapter to the skateboard's power jack, then plug the adapter into a standard electrical outlet.
- The charging indicator light on the charger will typically change color (e.g., red to green) when charging is complete.
- A full charge takes approximately 4 hours. Do not leave the skateboard charging unattended for extended periods.
4.3 Iċċarġjar tal-Kontroll mill-bogħod
- Locate the Type-C charging port on the remote control (refer to Figure 3.3).
- Connect the provided Type-C charging cable to the remote and a USB power source.
- The remote's LCD display will indicate charging status.
4.4 Tqabbil tal-Kontroll mill-bogħod
The skateboard and remote control are usually pre-paired. If re-pairing is necessary, consult the specific instructions provided with your remote or contact customer support.
5. Istruzzjonijiet Operattivi
5.1 Tixgħel/Jitfi
- Skateboard: The board will automatically turn on when you start to ride it. It will automatically turn off if not in use for 5 minutes to conserve battery. You can also manually turn it on/off using the power button on the underside (refer to Figure 3.2).
- Kontroll mill-bogħod: Press and hold one of the Power Buttons on the remote control to turn it on or off (refer to Figure 3.3).
5.2 Funzjonijiet ta' Kontroll mill-bogħod
The remote control allows you to manage the skateboard's speed, direction, and braking.
- Acceleration/Braking: Use the main control lever/wheel to accelerate (push forward) or brake (pull back).
- Modi ta 'Veloċità: The remote features 3 speed modes. Use the Mode Control Key to cycle through these modes (e.g., Low, Medium, High). Start with the lowest speed mode.
- Kontroll tad-Direzzjoni: Use the Direction Control Key to switch between forward and reverse motion.
- Display LCD: The display provides real-time information including current speed, battery levels for both the remote and skateboard, selected speed gear, brake gear, odometry, and trip mileage.
5.3 Dwal tas-Sigurtà LED
The JKING Electric Skateboard is equipped with two seven-color running LED safety light bars on both sides. These lights change direction and speed with the skateboard's movement, enhancing visibility.
- Tixgħel/Jitfi: Press and hold the reverse key (Direction Control Key) on the remote control for approximately 3 seconds to turn the LED light bars on or off.
Figura 5.1: The JKING Electric Skateboard with its LED light bars illuminated, demonstrating enhanced visibility in low-light conditions. The image also shows a person riding the skateboard.
6. Manutenzjoni
- Tindif: Regularly wipe down the board with a damp cloth. Avoid using excessive water or harsh chemicals. For the grip tape, use a soft brush to remove dust and debris.
- Ħażna: Store the skateboard in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is charged to about 50-60%.
- Wheel and Motor Maintenance: The brushless hub-motors are designed for durability. If the motor wheels wear out, only the sleeve needs replacement, not the entire motor. Regularly check wheels for wear and tear.
- Kura tal-batterija: Avoid fully discharging the battery frequently. Charge the battery after each use, or at least once a month if not in use, to prolong its lifespan.
- Iċċekkja tal-Hardware: Periodically check all nuts and bolts, especially on the trucks and wheels, to ensure they are securely tightened. Use the provided T-tool for adjustments.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Skateboard does not turn on. | Low battery; Skateboard not activated by movement; Power button not pressed. | Charge the skateboard battery; Gently push the board to activate auto-on; Press the power button on the underside. |
| Il-kontroll remot ma jikkonnettjax. | Low remote battery; Out of range; Pairing issue. | Charge the remote control; Ensure remote is within operating range; Re-pair the remote if necessary (refer to remote's specific instructions). |
| Veloċità jew firxa mnaqqsa. | Low battery charge; Riding uphill or against strong wind; Heavy load; Extreme temperatures. | Ensure battery is fully charged; Adjust riding conditions; Check load weight. |
| Id-dwal LED mhux qed jaħdmu. | Lights turned off; Remote control issue. | Press and hold the reverse key on the remote for 3 seconds to toggle lights; Ensure remote is charged and connected. |
| Ħsejjes mhux tas-soltu waqt it-tħaddim. | Loose components; Debris in wheels/motors. | Inspect all hardware for tightness; Clean wheels and motor areas. If noise persists, contact support. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Ċajt |
| Numru tal-Mudell | Jupiter-02 |
| Tip ta' Mutur | Dual Brushless Hub-Motor (450W*2) |
| L-ogħla Veloċità | Sa 26 MPH (42 km/siegħa) |
| Firxa | 19.5 - 21.8 Miles (31.4 - 35 km) |
| Batterija | 36V 7500mAh 270Wh Lithium-Ion (UL 2272 certified) |
| Ħin tal-Iċċarġjar | Madwar sagħtejn |
| Tagħbija Max | 330 lbs (150 kg) |
| Materjal tal-Gverta | Injam tal-Aġġru b'8 saffi |
| Deck Dimensions (L x W x H) | 38.2 x 10 x 5.3 Pulzier (97 x 25.4 x 13.5 ċm) |
| Daqs tar-rota | 90 mm |
| Materjal tar-rota | Poliuretejn (PU) |
| Piż tal-oġġett | 19.4 Lira (8.8 kg) |
| Klassifikazzjoni tar-Reżistenza għall-Ilma | IP64 |
| Angolu tat-Tlugħ | Massimu 20 ° |
| Medda ta' Età | Adult (16+) |
9. Garanzija u Appoġġ
The JKING Electric Skateboard Model Jupiter-02 comes with a 6-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims, technical support, or any questions regarding your product, please contact the seller or JKING customer service through the platform where you purchased the product. Please have your purchase receipt and product model number (Jupiter-02) ready.
