Manwal tal-Utent tal-Heater Spazjali tat-Torri TRUSTECH KPT-1608F

1. Istruzzjonijiet Importanti dwar is-Sigurtà

Please read this entire instruction manual before using your TRUSTECH KPT-1608F Tower Space Heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage. Keep this manual for future reference.

• Dejjem ipplaggja l-ħiters direttament f'ħanut/reċipjent tal-ħajt. Qatt tuża b'korda ta' estensjoni jew vit tal-enerġija rilokabbli (outlet/power strip).
• Dan il-heater ikun jaħraq meta jkun qed jintuża. Biex tevita ħruq, tħallix ġilda mikxufa tmiss uċuħ sħan. Uża l-mankijiet meta ċċaqlaq dan il-heater.
• Żomm materjali kombustibbli, bħal għamara, mħaded, friex, karti, ħwejjeġ, u purtieri mill-inqas 3 piedi (0.9 m) minn quddiem il-heater u żommhom 'il bogħod mill-ġnub u wara.
• Attenzjoni kbira hija meħtieġa meta xi heater jintuża minn jew ħdejn tfal jew persuni invalidi u kull meta l-heater jitħalla jaħdem u ma jkunx hemm attenzjoni.
• Dejjem aqla l-heater meta ma tkunx qed tuża.
• Tħaddimx xi heater b'korda jew plagg bil-ħsara jew wara li l-heater ma jaħdimx, ikun waqa' jew ġie mħassar b'xi mod. Armi l-heater, jew erġa' lura f'faċilità ta' servizz awtorizzata għal eżaminazzjoni u/jew tiswija.
• Tużax barra.
• Dan il-heater mhuwiex maħsub għall-użu fil-kmamar tal-banju, f'żoni tal-ħasil tal-ħwejjeġ, u f'postijiet interni simili. Qatt issib il-ħiter fejn jista 'jaqa' f'banju jew f'kontenitur ta 'ilma ieħor.
• Tmexxix korda taħt it-twapet. Tgħattix il-korda b'twapet tat-twapet, runners, jew kisi simili. Irranġa l-korda 'l bogħod miż-żona tat-traffiku u fejn ma titfixkelx.
• Biex skonnettja l-heater, dawwar il-kontrolli fuq OFF, imbagħad neħħi l-plagg mill-iżbokk.
• Daħħalx jew tħallix oġġetti barranin jidħlu f'xi ftuħ ta' ventilazzjoni jew exhaust peress li dan jista' jikkawża xokk elettriku jew nar, jew jagħmel ħsara lill-heater.
• Biex tipprevjeni nar possibbli, m'għandekx timblokka d-dħul tal-arja jew l-egżost bl-ebda mod. Tużax fuq uċuħ rotob, bħal sodda, fejn il-fetħiet jistgħu jiġu mblukkati.
• Ħiter għandu partijiet sħan u b'ark jew sparking ġewwa. Tużahx f'żoni fejn jintużaw jew jinħażnu gażolina, żebgħa jew likwidi li jaqbdu.
• Uża dan il-heater biss kif deskritt f'dan il-manwal. Kwalunkwe użu ieħor mhux rakkomandat mill-manifattur jista 'jikkawża nar, xokk elettriku, jew korriment lil persuni.
• Always plug heaters directly into a wall outlet. Never use with an extension cord.
• The heater includes an Protezzjoni mis-sħana żejda feature that automatically shuts off the unit if internal components reach a high temperature. If this occurs, unplug the heater, allow it to cool, and then plug it back in.
• Il-heater huwa mgħammar b'a Protezzjoni kontra t-Trib switch that automatically turns off the unit if it is tilted or knocked over. Ensure the heater is placed on a flat, stable surface to prevent accidental tip-overs.

2. Prodott Aktarview

The TRUSTECH KPT-1608F Tower Space Heater is designed to provide efficient and comfortable heating for indoor spaces. It features PTC ceramic heating technology for rapid warmth, multiple operating modes, an adjustable thermostat, and a 90° oscillation function for widespread heat distribution. Enhanced safety features like overheat and tip-over protection ensure reliable operation. The integrated 3D flame effect adds an aesthetic touch.

Figure 2.1: TRUSTECH KPT-1608F Tower Space Heater

Karatteristiċi ewlenin:

• Tisħin Instant: PTC ceramic heating element provides rapid warmth.
• Oxxillazzjoni ta' 90°: Iqassam is-sħana b'mod uniformi madwar il-kamra.
• 3 Modi ta' Operazzjoni: High Heat (1500W), Low Heat (1000W), and Fan Only.
• Termostat aġġustabbli: Maintain desired room temperature from 50°F (10°C) to 95°F (35°C).
• Timer ta' 12 siegħa: Programmable shut-off timer in 1-hour increments.
• Kontroll mill-bogħod: Operazzjoni konvenjenti mill-bogħod.
• 3D Flame Effect: Realistic flame display for ambiance, can be turned on/off independently.
• Protezzjonijiet tas-Sigurtà: Overheat and Tip-Over automatic shut-off.

3. Setup

Follow these steps to set up your heater:

1. Ippakkja: Neħħi l-ħiter mill-imballaġġ tiegħu bir-reqqa. Żomm l-imballaġġ għall-ħażna barra l-istaġun.
2. Pjazzament: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from walls, furniture, and other objects. Do not place it on soft surfaces like rugs or carpets that might block the air intake.
3. Konnessjoni tal-Enerġija: Plug the power cord directly into a 120V AC, 60Hz grounded wall outlet. Do not use extension cords or power strips.

4. Istruzzjonijiet Operattivi

The heater can be operated using the touch control panel on the top of the unit or the included remote control.

Funzjonijiet tal-Panel tal-Kontroll u tal-Kontroll mill-Bogħod:

Figure 4.1: Control Panel and Remote Control

• Buttuna tal-Qawwa (Simbolu tal-Qawwa): Ixgħel jew jitfi l-heater.
• Buttuna tal-Modalità (Fan/Heat Symbol): Cycles through High Heat (1500W), Low Heat (1000W), and Fan Only modes.
• Buttuna tal-Oxxillazzjoni (Arrows Circle Symbol): Jattiva jew jiddiżattiva l-funzjoni tal-oxxillazzjoni ta' 90°.
• Buttuna tat-Tajmer (Simbolu tal-Arloġġ): Jissettja t-tajmer tat-tifi awtomatiku minn siegħa sa 12-il siegħa.
• Temperature Up/Down Buttons (+/- Symbols): Jaġġusta l-issettjar tat-temperatura mixtieqa.
• 3D Flame Button (Flame Symbol): Turns the 3D flame effect ON or OFF.

Operazzjoni Bażika:

1. Qawwa Mixgħul: Press the Power Button. The heater will start in the last used mode or default to a heating mode.
2. Agħżel il-Modalità: Press the Mode Button to cycle through High Heat, Low Heat, and Fan Only. The display will indicate the current mode.
3. Issettjat Temperatura: In heating modes, use the Temperature Up/Down buttons to set your desired temperature between 50°F and 95°F. The heater will automatically adjust its operation to maintain this temperature.
4. Attiva l-Oxxillazzjoni: Press the Oscillation Button to enable the 90° widespread heat distribution. Press again to stop oscillation.
5. Issettja l-Timer: Press the Timer Button to set an auto-off timer from 1 to 12 hours. Each press increases the timer by one hour. The heater will automatically turn off after the set time.
6. 3D Flame Effect: Press the 3D Flame Button to turn the realistic flame effect on or off. This can be operated independently of the heating function.
7. Itfi: Press the Power Button again to turn off the heater. The fan may continue to run for a short period to cool down the heating element.

Figure 4.2: Instant and Widespread Warmth

Figure 4.3: Energy-Saving Thermostat

Figure 4.4: 3D Realistic Flame Effect

5. Manutenzjoni

Proper maintenance ensures the longevity and efficient operation of your heater.

Tindif:

1. Dejjem aqla’ l-heater mill-plagg tal-elettriku u ħallih jiksaħ kompletament qabel ma tnaddfu.
2. Imsaħ l-uċuħ ta' barra tal-ħiter b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.
3. Tgħaddix il-heater fl-ilma jew tħalli l-ilma jqattar ġewwa l-heater, għax dan jista 'joħloq periklu ta' xokk elettriku.
4. Clean the air intake and exhaust vents regularly with a vacuum cleaner or a soft brush to remove dust and lint.

Ħażna:

When storing the heater, keep it in a cool, dry location. It is recommended to store it in its original packaging to protect it from dust and damage.

6 Issolvi l-problemi

Jekk il-ħiter tiegħek mhux qed jaħdem sew, jekk jogħġbok irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Figure 6.1: Tip-Over and Overheat Protection

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

This TRUSTECH KPT-1608F Tower Space Heater comes with a garanzija ta 'sena mid-data tax-xiri.

For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase documentation or visit the official TRUSTECH websit għad-dettalji tas-servizz tal-klijent.