Einhell TC-PW 610 Compact Pneumatic Impact Wrench User Manual

Introduzzjoni

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TC-PW 610 Compact Pneumatic Impact Wrench. Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its lifespan. This powerful air impact wrench is designed for demanding tasks such as changing tires on vehicles, offering a maximum torque of 610 Nm and a compact design for accessibility.

Istruzzjonijiet tas-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korrimenti u ħsara lill-għodda:

• Ilbes tagħmir protettiv personali (PPE) xieraq, inklużi nuċċalijiet tas-sigurtà, protezzjoni għas-smigħ, u ingwanti.
• Ensure the air supply is disconnected before changing accessories or performing maintenance.
• Teċċedix il-pressjoni massima tat-tħaddim ta' 8 bar.
• Żomm idejk u ħwejjeġ maħlula 'l bogħod minn partijiet li jiċċaqilqu.
• Use only genuine Einhell accessories or those approved for use with this tool.
• Żomm qabda soda fuq l-għodda waqt l-operazzjoni.
• Aħżen l-għodda f'post niexef u sigur, fejn ma jintlaħaqx mit-tfal.
• Regularly inspect the air hose for damage and ensure secure connections.

Prodott Overview u Komponenti

The Einhell TC-PW 610 Compact Pneumatic Impact Wrench comes with several components designed for efficient operation.

Figure 1: The Einhell TC-PW 610 Compact Pneumatic Impact Wrench, including its transport case and various accessories.

Aċċessorji inklużi:

• 3 x Impact Wrench Sockets (17mm, 19mm, 21mm)
• 1 x Empty Oil Burette (for lubrication)
• 1 x Connection Fitting (European Shape)
• 1 x Teflon Sealing Strip (10 m)
• 1 x Transport and Storage Case

Figura 2: Dettaljat view of the included accessories: three color-coded sockets (17mm, 19mm, 21mm), an air connection fitting, Teflon sealing tape, and an oil bottle for maintenance.

Figura 3: Proġett tal-ġenbfile of the impact wrench, highlighting its compact design and ergonomic handle.

Figure 4: Close-up of the 1/2-inch square drive, where sockets are attached.

Setup

1. Konnessjoni tal-Provvista tal-Ajru: Connect the provided connection fitting to the air inlet of the impact wrench. Use the Teflon sealing strip on the threads to ensure an airtight seal.
2. Hose Requirement: For optimal performance, connect the tool to an air compressor using an air hose with a minimum inner diameter of 9mm.
3. Lubrikazzjoni: Before first use, and regularly thereafter, add a few drops of pneumatic tool oil (not included, use the provided oil burette) into the air inlet. This lubricates the internal components.
4. It-twaħħil tas-sokit: Select the appropriate socket (17mm, 19mm, or 21mm) and firmly attach it to the 1/2" square drive.

Istruzzjonijiet Operattivi

The Einhell TC-PW 610 is designed for efficient loosening and tightening of fasteners, particularly for vehicle wheel nuts.

Figure 5: Demonstrating the use of the impact wrench for tire changing, highlighting its practical application.

Direction and Torque Control:

The tool features an ergonomic left/right rotation switch and multiple torque settings.

Figure 6: The control switch for selecting rotation direction (left/right) and adjusting torque settings.

• Left Rotation (Loosening): The tool has 1 level for left rotation, providing full power for loosening stubborn fasteners.
• Right Rotation (Tightening): The tool offers 3 levels for right-hand rotation, allowing for controlled tightening. Select the appropriate level based on the required torque for the fastener.

Figure 7: Visual representation of the 4-step torque setting capability, allowing precise control over fastening.

Operazzjoni Ġenerali:

1. Ensure the air compressor is set to the correct pressure (max. 8 bar).
2. Select the desired rotation direction and torque setting.
3. Poġġi s-sokit sew fuq il-qafla.
4. Press the trigger to operate the tool. Release the trigger to stop.
5. For tightening, always finish with a torque wrench to ensure fasteners are tightened to manufacturer specifications.

Figure 8: The impact wrench is primarily for high-torque applications like tire changing. The image also highlights the importance of a 9mm inner diameter air hose for optimal performance.

Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tal-impact wrench tiegħek.

• Lubrikazzjoni: Add 2-3 drops of pneumatic tool oil into the air inlet before and after each use, or at least once daily if used frequently. This prevents corrosion and ensures smooth operation of internal components.


Figure 9: The "OIL" icon serves as a reminder for regular lubrication of the pneumatic tool.

• Tindif: Keep the tool clean and free from dirt and debris. Wipe down the exterior with a damp drapp. Tużax kimiċi ħarxa.
• Filtru tal-Arja: If your air compressor has an inline air filter, ensure it is regularly cleaned or replaced to prevent contaminants from entering the tool.
• Ħażna: Store the impact wrench and its accessories in the provided transport case in a dry, cool place.

Issolvi l-problemi

Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet potenzjali tagħhom.

Speċifikazzjonijiet

Figure 10: Key specifications: 8 bar max pressure, 610 Nm high power, and 1/2 inch drive.

Garanzija u Appoġġ

Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and claim procedures.

For technical support, spare parts, or service inquiries, please contact Einhell customer service. Contact information can typically be found on the Einhell official webis-sit jew fuq l-imballaġġ tal-prodott.

Uffiċjali ta' Einhell Websit: www.einhell.com