OREiN SL-1

OREiN LED Flood Light Outdoor Motion Sensor

Manwal għall-Utent

1. Informazzjoni dwar is-Sigurtà

Jekk jogħġbok aqra l-istruzzjonijiet kollha tas-sigurtà bir-reqqa qabel l-installazzjoni u t-tħaddim. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew perikli oħra.

2. Prodott Aktarview

The OREiN LED Flood Light is an outdoor motion sensor security light designed for enhanced illumination and security around your home. It features a 450° wide adjustable design, allowing for flexible light direction, and offers three distinct operating modes to suit various needs.

OREiN LED Flood Light with two adjustable heads and a central motion sensor

Figure 2.1: OREiN LED Flood Light, showcasing its dual adjustable heads and integrated motion sensor.

Karatteristiċi ewlenin:

X'hemm fil-Kaxxa:

3. Installazzjoni

The OREiN LED Flood Light is designed for hardwired installation and requires connection to a standard junction box (not included). It supports both wall mounting and soffit mounting.

Passi ta' Installazzjoni:

  1. Ipprepara l-Wiċċ tal-Immuntar: Ensure the power is off at the circuit breaker. Identify the location for installation, preferably a standard junction box.
  2. Waħħal il-Bracket: Secure the provided mounting bracket to the junction box or wall using the appropriate screws. The bracket dimensions are approximately 3.54 inches (9 cm) in diameter.
    Diagram showing the mounting bracket dimensions and how it attaches to a junction box

    Figure 3.1: Mounting bracket dimensions and attachment to a junction box.

  3. Qabbad il-Wiring: Connect the wires from the fixture to the corresponding wires in the junction box (e.g., black to black, white to white, ground to ground). Use wire nuts to secure connections.
    Step-by-step diagram showing electrical wiring connections for the flood light

    Figure 3.2: Wiring connections for hardwired installation.

  4. Immuntar l-Apparat tad-Dawl: Align the fixture with the mounting bracket and secure it with screws. Ensure a tight and stable fit.
  5. Aġġusta r-Ras tad-Dawl: Once mounted, adjust the two light heads and the motion sensor to your desired angles. The fixture offers 450° of total adjustment.
    Image demonstrating the 450 degree wide light adjustment capability of the flood light

    Figure 3.3: Flexible adjustment of light heads to avoid light pollution or illuminate specific areas.

    Image showing the flood light mounted on a soffit, highlighting its soffit ceiling mount friendly design

    Figure 3.4: Soffit ceiling mount friendly design with no angle restrictions for the sensor.

  6. Irrestawra l-Enerġija: Ixgħel il-qawwa lura fis-circuit breaker.

4. Istruzzjonijiet Operattivi

The OREiN LED Flood Light features an integrated red button for mode selection and control. The motion sensor has a detection range of 6.4-40 feet.

Image illustrating the motion detection range of the flood light in a driveway setting

Figure 4.1: Motion activated lighting with a detection range of 6.4-40 feet.

Red Button Setting Instructions:

  1. Mixgħul/Mitfi: Long press the red button for 2 seconds to turn the light on or off.
  2. Aqleb il-Modi: Single click the red button to cycle through the three operating modes. Observe the light's behavior to identify the current mode:
    • Modalità tas-Sigurtà: The light flashes twice slowly. In this mode, the motion sensor turns on the light to 100% brightness when motion is detected, and turns off when no motion is detected.
      Illustration of Security Mode where light turns on to 100% brightness upon motion detection

      Figure 4.2: Security Mode operation (100% brightness on motion).

    • Day to Day Mode: The light flashes twice quickly. In this mode, the light stays at 30% brightness when no motion is detected and switches to 100% brightness upon detecting motion.
      Illustration of Day to Day Mode where light stays at 30% brightness and goes to 100% on motion

      Figure 4.3: Day to Day Mode operation (30% brightness, 100% on motion).

    • Modalità Manwali: The light is fixed (no flashes). In this mode, the light turns on at night and stays on all night, controlled by a manual switch.
      Illustration of Manual Mode where light is controlled by a manual switch

      Figure 4.4: Manual Mode operation (controlled by external switch).

  3. Irrisettja: Long press the red button for 10 seconds to reset the light to its default settings.
    Close-up image of the red button and its functions: On/Off, Switch Modes, Reset

    Figure 4.5: Red button functions for On/Off, Mode Switching, and Reset.

Aġġusta tad-Direzzjoni tad-Dawl:

The flood light features multiple adjustable joints on its light arms, allowing you to precisely direct the light where needed. This flexibility helps in avoiding light pollution to neighbors or illuminating specific areas like walkways or blind corners.

Diagram showing the various adjustable joints and angles on the flood light arms

Figure 4.6: Adjustable joints for precise light direction.

5. Manutenzjoni

The OREiN LED Flood Light is designed for long-lasting performance with minimal maintenance. Its IP65 rating ensures protection against dust and water.

Image showing the flood light being exposed to rain, demonstrating its IP65 waterproof rating

Figure 5.1: IP65 Waterproof design, suitable for various weather conditions.

6 Issolvi l-problemi

If you encounter issues with your OREiN LED Flood Light, refer to the following common problems and solutions:

ProblemaKawża PossibbliSoluzzjoni
Light stays on constantly (does not turn off or dim).Incorrect mode setting (e.g., Manual Mode selected). Sensor sensitivity or ambient light sensor (LUX) setting.
  • Single click the red button to cycle through modes and ensure Security Mode or Day to Day Mode is selected.
  • Check the ambient light sensor (if adjustable) to ensure it's not set to keep the light on during daylight.
  • Long press the red button for 10 seconds to reset the light to default settings, then reconfigure.
Id-dawl ma jixgħelx meta jinstab moviment.Incorrect mode setting. Sensor obstruction or incorrect angle. Power supply issue.
  • Ensure Security Mode or Day to Day Mode is active.
  • Verify the motion sensor is not obstructed and is angled correctly to cover the desired area.
  • Iċċekkja l-konnessjonijiet tal-enerġija u s-circuit breaker.
Motion sensor does not detect motion at close range or angles.Sensor angle not optimized for close-range detection.Adjust the motion sensor's angle downwards to improve close-range detection. The sensor has a 350° rotation capability.
Id-dawl jitteptep jew huwa baxx.Loose wiring connection. Power fluctuation.
  • Turn off power at the breaker and check all wiring connections for tightness.
  • Jekk il-problema tippersisti, ikkonsulta elettriċista kwalifikat.

7. Speċifikazzjonijiet

KaratteristikaSpeċifikazzjoni
BrandOREIN
Isem tal-MudellOL36002440 (Item Model Number: SL-1)
Tip ta' Sors tad-DawlLED
Wattage12 Watts (Ekwivalenti ta' 150W)
Luminożità1600 Lumens
Temperatura tal-Kulur5000 Kelvin (Daylight White)
Voltage120 Volts
MaterjalPolycarbonate, Acrylonitrile Butadiene Styrene (ABS)
KulurIswed
Dimensjonijiet tal-Prodott7"T x 5"W x 5"Għ (17.78 ċm x 12.7 ċm x 12.7 ċm)
Piż tal-oġġett1.67 liri (0.76 kg)
Livell ta 'Reżistenza għall-IlmaIP65 Waterproof
Ħajja Medja50,000 Sigħat
Tip ta' InstallazzjoniWall Mounting and Soffit Mounting
Metodu ta' KontrollPush Button (on fixture)
ĊertifikazzjonijietCE, FCC, RoHS

8. Garanzija u Appoġġ

OREiN stands behind the quality of its products. Your LED Flood Light comes with a comprehensive warranty and dedicated customer support.

OREiN products are certified by FCC, CE, and ROSH, ensuring high quality standards and safety.

Dokumenti Relatati - SL-1

Preview Istruzzjonijiet għall-Aġġustament tas-Sensor OREIN
Gwida għall-aġġustament tas-settings għad-dwal ta' barra bis-sensorju tal-moviment OREIN, li tkopri l-aġġustamenti ta' TIME, SENS, u LUX għal diversi modi ta' dawl.
Preview Manwal tal-Installazzjoni u l-Utent tad-Dwal ta' Barra b'Sensor tal-Mozzjoni Intelliġenti OREiN OL36002440
Gwida komprensiva għall-installazzjoni u t-tħaddim tad-Dwal ta' Barra bis-Sensor tal-Mozzjoni Intelliġenti OREiN, Mudell OL36002440. Tinkludi s-setup, l-aġġustamenti tas-sensor, il-modi, is-soluzzjoni tal-problemi, u struzzjonijiet dwar il-konnessjoni tal-app.
Preview OREIN LED Security Lights with Motion Sensor: Installation and Operation Guide
Detailed installation, setup, and troubleshooting guide for the OREIN LED Security Lights with Motion Sensor (Model OL3600140). Learn about sensor settings, operating modes, and product specifications.
Preview Manwal tal-Utent tad-Dawl tal-Għargħar Intelliġenti ta' Barra OREIN b'Sensor tal-Mozzjoni OL27002546
Manwal tal-utent għad-Dawl ta' Barra Intelliġenti OREIN b'Sensor tal-Mozzjoni (Mudell OL27002546). Jinkludi gwida għall-installazzjoni, settings tas-sensor, deskrizzjoni tal-modi, issolvi l-problemi, speċifikazzjonijiet tal-prodott, u struzzjonijiet għall-konnessjoni tal-app.
Preview Dwal tas-Sigurtà LED OREiN b'Sensor tal-Mozzjoni: Manwal tal-Installazzjoni u t-Tħaddim
Gwida komprensiva għall-installazzjoni u t-tħaddim tad-Dwal tas-Sigurtà LED OREiN b'Sensor tal-Mozzjoni (30W, 4500LM). Tinkludi prekawzjonijiet ta' sigurtà, struzzjonijiet ta' setup, soluzzjoni ta' problemi, u pariri dwar il-kura.
Preview OREIN OL3600140 LED Motion Sensor Outdoor Lights: Installation and Operation Guide
This guide provides detailed instructions for installing, operating, and maintaining the OREIN OL3600140 LED Motion Sensor Outdoor Lights. Learn about sensor settings, modes, troubleshooting, and product specifications.