1. Introduzzjoni
This manual provides detailed instructions for the setup, operation, and maintenance of your RCA RCDW10 Alarm Clock Radio. This device combines a digital alarm clock with an AM/FM radio and essential NOAA Weather Alert capabilities, designed to keep you informed and on schedule.
2. Informazzjoni Importanti dwar is-Sigurtà
- Aqra l-istruzzjonijiet kollha qabel tħaddem l-unità.
- Żomm dan il-manwal għal referenza futura.
- Tesponix l-unità għal taqtir jew titjir ta' ilma.
- Kun żgur li jkollok ventilazzjoni xierqa; timblokkax il-fetħiet tal-ventilazzjoni.
- Uża biss aċċessorji/aċċessorji speċifikati mill-manifattur.
- Aqla 'l-unità waqt maltempati tas-sajjetti jew meta ma tintużax għal perjodi twal.
- Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.
3. Kontenut tal-Pakkett
- RCA RCDW10 Alarm Clock Radio
- Kurdun tal-Enerġija AC
- Manwal għall-Utent (dan id-dokument)
Note: A 9V battery for backup power is not included and must be purchased separately.
4. Prodott Aktarview
Quddiem View

Wara View

Kontrolli tal-Panel Fuq

Familiarize yourself with the buttons and ports:
- CLK/MEM: Clock/Memory button for setting time and saving radio presets.
- SET: Used in conjunction with CLK/MEM for setting time and alarms.
- DIMMER: Jaġġusta l-luminożità tal-wiri.
- AL1 VOL+ / AL2 VOL-: Adjusts alarm volume and is used for setting alarms.
- SNOOZE/SLEEP: Activates snooze during an alarm or sleep timer during radio playback.
- SOURCE/AL OFF: Toggles between AM/FM/Weather Band/AUX modes and turns off the active alarm.
- NOAA: Activates the NOAA Weather Band.
- Tuning Buttons (+/-): Used for tuning radio frequencies and adjusting time/alarm settings.
- Antenna: Telescoping antenna for improved radio reception.
- Input AUX: Jack ta' 3.5mm għall-konnessjoni ta' apparati awdjo esterni.
- Kompartiment tal-batterija: For 9V battery backup.
5. Setup
5.1 Konnessjoni tal-Enerġija
- Plug the AC power cord into the AC IN jack on the back of the unit.
- Plug the other end of the power cord into a standard wall outlet (AC 120V, 60Hz).
- The unit will power on, and the display will show a flashing time (e.g., 12:00 AM).
5.2 Installazzjoni ta' Backup tal-Batterija
The unit requires one 9V battery (not included) for battery backup. This feature retains your time and alarm settings during a power outage.
- Iftaħ l-għatu tal-kompartiment tal-batterija fuq wara tal-unità.
- Daħħal batterija ġdida ta' 9V, waqt li tosserva l-polarità korretta (+ u -).
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Note: Battery backup only maintains settings; the display will not illuminate, and alarms will not sound during a power outage.
5.3 Aġġustament tal-Antenna
For optimal AM/FM and Weather Band reception, extend the telescoping antenna fully and adjust its position. For AM reception, rotating the unit itself may also improve signal quality.
6. Istruzzjonijiet Operattivi
6.1 Issettjar tal-Ħin tal-Arloġġ
- Agħfas u żomm il- CLK/MEM Agħfas il-buttuna sakemm id-displej jteptep.
- Uża l- + or - tuning buttons to adjust the hour. Observe the PM indicator for correct AM/PM setting.
- Agħfas il- CLK/MEM button again. The minute digits will flash.
- Uża l- + or - tuning buttons to adjust the minutes.
- Agħfas il- CLK/MEM button once more to save the time and exit clock setting mode.
6.2 Dimmer tal-Wiri
Agħfas il- DIMMER button repeatedly to cycle through different brightness levels for the display (High, Medium, Low, Off).
6.3 Setting Alarms (Alarm 1 and Alarm 2)
You can set two independent alarms. The procedure is similar for both.
- To Set Alarm 1: Agħfas u żomm il- AL1 VOL+ Agħfas il-buttuna sakemm il-ħin tal-allarm jteptep.
- Uża l- + or - tuning buttons to adjust the alarm hour. Observe the PM indicator.
- Agħfas AL1 VOL+ għal darb'oħra. Iċ-ċifri tal-minuti jibdew jteptep.
- Uża l- + or - tuning buttons to adjust the alarm minutes.
- Agħfas AL1 VOL+ agħfas mill-ġdid biex tagħżel is-sors tal-allarm: Buzzer or Radju. The corresponding indicator (Buzzer or Radio) will light up.
- If Radio is selected, use the + or - tuning buttons to set the desired wake-up volume.
- Agħfas AL1 VOL+ one last time to save Alarm 1 settings. The AL1 indicator will remain lit.
- To Set Alarm 2: Follow the same steps using the AL2 VOL- buttuna.
6.4 Funzjoni Snooze
Meta tinstema' allarm, agħfas il-buttuna SNOOZE/SLEEP button to temporarily silence it. The alarm will sound again after approximately 9 minutes. You can repeat this several times.
6.5 Turning Off Alarms
- To turn off the current alarm: Agħfas il- SOURCE/AL OFF button. The alarm will be reset for the next day.
- To disable an alarm permanently: Press the corresponding alarm button (AL1 VOL+ or AL2 VOL-) repeatedly until the AL1 or AL2 indicator light turns off.
6.6 Radio Operation (AM/FM/Weather Band)
- Agħfas il- SOURCE/AL OFF button repeatedly to cycle through radio bands: FM, AM, NOAA, AUX.
- Irfinar Manwali: Uża l- + or - tuning buttons to adjust the frequency step by step.
- Irfinar tal-Iskennjar Awtomatiku: Agħfas u żomm il- + or - tuning buttons for a few seconds. The radio will automatically scan and stop at the next strong station.
6.7 Saving and Recalling Radio Presets
You can store your favorite radio stations for quick access.
- Tune to the desired station (AM or FM).
- Agħfas u żomm il- CLK/MEM sakemm "P01" (jew in-numru preset disponibbli li jmiss) jteptep fuq id-displej.
- Uża l- + or - tuning buttons to select the desired preset number (P01-P10).
- Agħfas CLK/MEM għal darb'oħra biex issalva l-istazzjon fil-preset magħżul.
- To Recall Presets: Fil-modalità tar-radju, agħfas fil-qosor il-buttuna CLK/MEM button repeatedly to cycle through your saved presets.
6.8 NOAA Weather Alerts
The RCA RCDW10 is equipped to receive NOAA Weather Alerts, providing critical information during severe weather events.

- When the unit is in NOAA Weather Band mode (selected via SOURCE/AL OFF button), it continuously monitors for weather alerts.
- Upon receiving an alert, the unit will sound an alarm and display the NOAA indicator.
- The alert system is designed to provide timely warnings for various natural disasters, including tornadoes, hurricanes, heavy rain/flooding, and earthquakes.
- Ensure the antenna is fully extended for best reception of NOAA broadcasts.
6.9 Sleep Timer
It-tajmer tal-irqad jippermettilek torqod bir-radju, li jintefa awtomatikament wara perjodu stabbilit.
- Waqt li r-radju jkun qed idoqq, agħfas il-buttuna SNOOZE/SLEEP Agħfas il-buttuna ripetutament biex tgħaddi mill-għażliet tat-tajmer tal-irqad (eż., 90, 60, 30, 15-il minuta, MITFI).
- Ir-radju se jdoqq għat-tul magħżul u mbagħad jintefa awtomatikament.
6.10 Input AUX
Connect an external audio device (e.g., MP3 player, smartphone) to the AUX IN jack on the back of the unit using a 3.5mm audio cable (not included).
- Agħfas il- SOURCE/AL OFF button until "AUX" appears on the display.
- Play audio from your connected device. The sound will be output through the clock radio's speaker.
- Adjust the volume using the volume controls on your external device and the clock radio.
7. Manutenzjoni
- Tindif: Imsaħ l-unità b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
- Sostituzzjoni tal-batterija: Replace the 9V backup battery annually or when the battery low indicator appears (if applicable) to ensure settings are retained during power outages.
- Ħażna: If storing the unit for an extended period, remove the 9V backup battery to prevent leakage.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-unità ma tixgħelx. | Il-korda tal-enerġija mhux imqabbda sew. | Ensure the AC power cord is securely plugged into the unit and a working wall outlet. |
| Display is blank during power outage. | Battery backup only retains settings, does not power display. | This is normal operation. The display will return when AC power is restored. |
| Riċeviment ħażin tar-radju. | Antenna mhux estiża jew pożizzjonata b'mod korrett; interferenza. | Extend the telescoping antenna fully and adjust its direction. Try repositioning the unit. Avoid placing near other electronic devices. |
| L-allarm ma jdoqqx. | Alarm not set or disabled; volume too low. | Verify alarm settings (AL1/AL2 indicators should be lit). Check alarm volume if set to radio. Ensure the unit has AC power. |
| NOAA alerts not received. | Not in NOAA mode; poor reception; no alerts issued. | Ensure the unit is in NOAA Weather Band mode. Extend and adjust the antenna. Confirm if any alerts are active in your area. |
9. Speċifikazzjonijiet
- Mudell: RCDW10
- Sors tal-Enerġija: AC 120V, 60Hz
- Backup tal-batterija: Batterija waħda ta' 9V (mhux inkluża)
- Bands tar-Radju: AM, FM, NOAA Weather Band
- Wiri: Digital LED, Dimmable
- Karatteristiċi: Dual Alarms, Snooze, Sleep Timer, AUX Input, NOAA Weather Alerts
- Dimensjonijiet: Approximately 5.3 in (W) x 3.2 in (H) x 2.6 in (D) / 13.5 cm (W) x 8.1 cm (H) x 6.6 cm (D)
- Piż: Madwar 399 g

10. Garanzija u Appoġġ
RCA products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official RCA support websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Please note that specific warranty terms may vary by region and retailer.





