1. Introduzzjoni
The BOYA BY-XM6 S2 is a 2.4GHz dual-channel wireless microphone system designed to capture clear, broadcast-quality sound. It is ideal for a wide range of applications including vlogging, live streaming, interviews, and mobile journalism. This system offers stable signal transmission, high-fidelity recording, and an intuitive OLED display, making your audio recording process efficient and reliable.
2. Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:
Image: All components included in the BOYA BY-XM6 S2 system package.
- 1x BY-XM6 RX Riċevitur
- 2x BY-XM6 TX Trasmettitur
- 1x 3.5mm TRS għal TRS Output Cable għall-Kameras
- 1x 3.5mm TRS għal TRRS Output Cable għal Smartphones
- 3x USB-C Iċċarġjar Cable
- 2x Lavalier Mikrofonu
- Windskrin tal-pil 2x għal Mikrofonu Inkorporat
- 1x Borża
3. Prodott Aktarview
3.1 Komponenti
The BY-XM6 S2 system consists of two transmitters (TX) and one receiver (RX). Each unit is compact and features an OLED display for easy monitoring of settings and battery life.
Image: The BOYA BY-XM6 S2 system, including the receiver (RX) and two transmitters (TX).
3.2 Karatteristiċi ewlenin
- 2.4GHz Digital Frequency: Ensures stable and reliable wireless transmission up to 100 meters (328 feet) without obstacles.
- Dual Channel System: Supports two person interviewing or recording simultaneously.
- Reġistrazzjoni ta' fedeltà għolja: Built-in low-noise microphone and included lavalier microphones provide clear audio.
- Display OLED: Easy-to-read screen shows battery level, signal strength, audio levels, and more.
- Multiple Input Modes: Can be used with the built-in microphone or external lavalier microphones.
- Real-time Headphone Monitoring: Allows you to monitor audio output directly from the receiver.
- Swiċċ Mono/Stereo: Provides flexibility for post-production by allowing selection between mono and stereo recording modes.
- Ħajja twila tal-batterija: Up to 7 hours of operation time on a single charge.
- Kompatt u portabbli: Lightweight design for easy carrying and discreet use.
Image: Key features of the BOYA BY-XM6 S2 system, highlighting its wireless capabilities and display.
Image: The BOYA BY-XM6 S2 is compatible with various devices including cameras, smartphones, and computers.
Multiple input modes
Up to 7 hours operation time
Daqs ultra kompatt
4. Gwida ta' Setup
4.1 Iċċarġjar tal-Apparati
Before first use, fully charge the transmitter (TX) and receiver (RX) units using the provided USB-C charging cables. Connect the cables to a standard USB power adapter (not included) or a computer's USB port. The OLED display will indicate charging status.
4.2 Tixgħel/Jitfi
- Qawwa Mixgħul: Long press the power button on both the TX and RX units until the OLED display illuminates.
- Itfi: Long press the power button again on both units until the display turns off.
4.3 Konnessjoni ma' Apparati ta' Reġistrazzjoni
The BY-XM6 S2 system is designed for plug-and-play operation. The TX and RX units will automatically pair upon powering on. If pairing fails, refer to the troubleshooting section.
- Għal Kameras (DSLR/Mingħajr Mera): Use the 3.5mm TRS to TRS output cable. Connect one end to the RX's 'OUT' port and the other end to your camera's microphone input.
- Għal Smartphones/Tablets: Use the 3.5mm TRS to TRRS output cable. Connect one end to the RX's 'OUT' port and the other end to your smartphone's headphone/microphone jack. For devices without a 3.5mm jack, an appropriate adapter (e.g., USB-C to 3.5mm or Lightning to 3.5mm) may be required (not included).
- Connecting Lavalier Microphone: Plug the lavalier microphone into the 'MIC IN' port on the TX unit. Ensure it is securely connected.
5. Istruzzjonijiet Operattivi
5.1 Funzjoni Mute
To mute the transmitter, short press the mute button on the TX unit. A mute icon will appear on the OLED display. Short press again to unmute.
5.2 Gwadan Kontroll
Adjust the audio input gain on the TX unit to optimize sound levels and prevent distortion. Use the '+' and '-' buttons to increase or decrease the gain. Monitor the audio level bar on the OLED display to ensure levels are within the optimal range.
5.3 Mono/Stereo Mode Selection
The receiver (RX) allows you to switch between mono and stereo output modes. Navigate through the menu on the RX unit to select the desired mode. In mono mode, both transmitter audio signals are mixed into a single channel. In stereo mode, each transmitter's audio is output to a separate channel (left/right).
5.4 Monitoraġġ f'ħin reali
Connect headphones to the 3.5mm headphone jack on the RX unit to monitor the audio in real-time. This allows you to check audio quality and levels during recording.
6. Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf l-unitajiet. Tużax kimiċi ħarxa jew materjali li joborxu.
- Ħażna: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided pouch for protection.
- Kura tal-batterija: For optimal battery life, avoid fully discharging the units frequently. Charge them regularly, even if not in use for extended periods.
- Windskrins: Regularly clean or replace the fur windshields to maintain effective wind noise reduction.
7 Issolvi l-problemi
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda ħoss jew volum baxx | Incorrect cable connection; low gain setting; muted transmitter; low battery. | Ensure cables are securely connected. Adjust gain on TX. Check if TX is muted. Charge units. |
| Voice breaks or signal dropouts | Obstacles between TX and RX; exceeding operating range; strong interference. | Reduce distance between TX and RX. Ensure clear line of sight. Avoid areas with strong Wi-Fi or other 2.4GHz devices. |
| Poor noise cancellation / Excessive background noise | Improper microphone placement; no windshield used; high ambient noise. | Ensure lavalier mic is placed correctly (e.g., 6-8 inches from mouth). Use the fur windshield, especially outdoors. Record in quieter environments. |
| Unitajiet mhux qed jitqabblu | Units too far apart; interference; pairing error. | Bring TX and RX closer together. Power cycle both units. Refer to manual for manual pairing steps if auto-pairing fails. |
| Wiri OLED mhux qed jaħdem | Low battery; unit not powered on; hardware issue. | Charge the unit. Long press power button to ensure it's on. If issue persists, contact support. |
8. Speċifikazzjonijiet Tekniċi
| Karatteristika | Speċifikazzjoni |
|---|---|
| Tip ta' Trażmissjoni | Frekwenza Diġitali 2.4GHz |
| Medda Operattiva | Up to 100m (328ft) (without obstacle) |
| Qawwa tal-Ħruġ RF | <10mW |
| Mudell Polari | Omnidirezzjonali |
| Rispons ta' Frekwenza | 35Hz-18KHz |
| Maximum SPL (Built-in Mic) | 120dB SPL |
| Maximum SPL (Lavalier Mic) | 110dB SPL |
| Sensitivity (Built-in Mic) | -39dB |
| Sensitivity (Lavalier Mic) | -39dB |
| SNR | > 84dB |
| Rekwiżiti ta' Enerġija | Batterija tal-Li-ion inkorporata jew USB-C DC 5V |
| Ħajja tal-Batterija Inkorporata | Appross. 7 sigħat |
| Inputs tal-awdjo | 3.5mm TRS MIC/LINE IN Jack jew Mikrofonu Inkorporat |
| Piż (TX/RX) | Approx. 32g (1.13oz) each |
| Dimensjonijiet (TX/RX) | 62.1 × 31.6 × 16.5mm |
| Konnettur tal-Ħruġ Awdjo | 3.5mm Headphone Jack; 3.5mm TRS Output Jack |
| Livell ta' Output Awdjo | –60 dBV to -20dBV |
9. Garanzija u Appoġġ
This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official BOYA website. For technical support, service, or inquiries regarding your BOYA BY-XM6 S2 system, please contact the importer/packer:
Dexter Ventures Pvt. Ltd.
New Delhi and Thane Maharashtra
Email: contact@dexterventures.in
