1. Introduzzjoni
This manual provides essential information for the assembly, operation, and maintenance of your tectake Canton Computer Desk 800993. Please read these instructions carefully before assembly and use to ensure safe and correct handling of the product. This computer desk is designed to provide a functional and stable workspace for home or office environments, featuring a spacious desktop and integrated side storage compartments.
Immaġni 1.1: Fuqview of the tectake Canton Computer Desk 800993, showcasing its industrial light wood finish and integrated shelving.
2. Twissijiet tas-Sigurtà
Warning: Assembly required. Exercise caution during mounting and when using the desktop.
- Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel tibda l-assemblaġġ.
- Arma l-iskrivanija fuq wiċċ artab u nadif biex tevita l-grif.
- Tissikkax iżżejjed il-viti, għax dan jista' jagħmel ħsara lill-materjal.
- Żomm partijiet żgħar 'il bogħod mit-tfal waqt l-assemblaġġ.
- Iċċekkja perjodikament il-qafliet kollha biex tiżgura li jibqgħu ssikkati.
- Do not exceed the maximum load capacities specified in the 'Specifications' section.
- Avoid placing hot items directly on the desktop surface without protection.
3. Kontenut tal-Pakkett
Before assembly, verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Panel tad-Desktop (1)
- Steel Frame Components (various)
- Side Shelf Panels (2)
- Saqajn Aġġustabbli (4)
- Ħardwer tal-Assemblaġġ (viti, boltijiet, ċavetta Allen)
- Manwal ta 'Istruzzjoni (dan id-dokument)
4. Istruzzjonijiet tal-Assemblea
Follow these steps carefully to assemble your tectake Canton Computer Desk. It is recommended to have two people for assembly.
- Iftaħ u Identifika l-Partijiet: Lay out all components on a clean, soft surface. Refer to the parts list to ensure everything is present.
- Arma l-Qafas Prinċipali: Connect the long horizontal steel bars to the vertical leg frames using the provided screws and Allen key. Ensure all connections are secure but do not fully tighten yet.
- Attach Side Shelf Supports: Secure the steel supports for the side shelves to the main frame as indicated in the diagram.
- Install Side Shelf Panels: Slide and secure the two side shelf panels onto their designated supports.
- Attach Desktop Panel: Carefully place the desktop panel onto the assembled frame. Align the pre-drilled holes on the desktop with the holes on the frame. Secure the desktop using the appropriate screws.
- Installa Saqajn Aġġustabbli: Screw the four adjustable plastic feet into the bottom of the desk legs.
- Final Tightening and Leveling: Once all components are in place, fully tighten all screws. Adjust the plastic feet to ensure the desk is stable and level on your floor.
Immaġni 4.1: Dettaljata view of the integrated side shelves, illustrating their placement within the desk frame.
Immaġni 4.2: Angolata view of the assembled desk, showing the desktop attached to the steel frame and shelves.
Image 4.3: Close-up of an adjustable foot, demonstrating its leveling mechanism.
5. Linji Gwida Operattivi
- Pjazzament: Position the desk on a flat, stable surface. Avoid direct sunlight or extreme temperature changes to prevent material damage.
- Kapaċità tat-Tagħbija: Do not exceed the maximum load capacity of 150 kg for the tabletop and 25 kg for each side compartment. Distribute weight evenly.
- Ġestjoni tal-Kejbil: Utilize the space behind the desk for organizing cables to maintain a tidy workspace.
- Stabbiltà: Regularly check the adjustable feet and tighten them if the desk becomes wobbly.
6. Manutenzjoni u Kura
- Tindif: Imsaħ l-uċuħ tal-iskrivanija b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif li joborxu jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
- Tixrid: Naddaf it-tixrid immedjatament biex tevita tbajja’ jew ħsara mill-ilma lill-injam inġinerizzat.
- Qafliet: Periodically inspect all screws and bolts and tighten them as necessary to maintain structural integrity.
- Protezzjoni: Use coasters or protective pads under hot items or items that may scratch the surface.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-iskrivanija titriegħed | Uneven floor; loose fasteners | Adjust the leveling feet; tighten all screws and bolts. |
| Parts are missing or damaged | Shipping error; manufacturing defect | Contact tectake customer support with your purchase details. |
| Diffikultà waqt l-assemblaġġ | Incorrect step sequence; misaligned parts | Review the assembly instructions carefully; ensure parts are correctly oriented before tightening. |
8. Speċifikazzjonijiet
- Mudell: 800993
- Ditta: tectake
- Kulur: Industrial Light Wood
- Materjal: Injam Inġinerizzat, Azzar Liga
- Total Dimensions (W x D x H): Madwar 120 x 60 x 75.5 ċm
- Top Side Compartments (W x D x H): Madwar 20 x 58 x 34 ċm
- Bottom Side Compartment (W x D x H): Madwar 20 x 58 x 30 ċm
- Steel Body Dimensions: Madwar 2 x 2 ċm
- Adjustable Plastic Feet Height: Madwar 1.5 ċm
- Tabletop Load Capacity: 150 kg
- Each Side Compartment Load Capacity: 25 kg
- Piż tal-oġġett: 15 kg
- Karatteristiċi Speċjali: Saqajn aġġustabbli
Image 8.1: Detailed diagram illustrating the dimensions of the tectake Canton Computer Desk.
9. Garanzija u Appoġġ
For warranty information, product support, or to report missing/damaged parts, please contact your retailer or the manufacturer, tectake. Please have your purchase receipt and model number (800993) available when contacting support.
Manufacturer: tectake
Seller: TecTake Sweden AB
