1. Prodott Aktarview
The Streamlight TLR-1 HL is a high-lumen, rail-mounted tactical flashlight designed for maximum illumination in various environments. It features a powerful C4 LED that delivers 1000 lumens, providing a wide beam pattern suitable for clearing rooms or searching large areas. Its robust construction ensures durability and reliability in demanding conditions.
The Streamlight TLR-1 HL flashlight, shown here in Flat Dark Earth, is a rail-mounted tactical light. It is accompanied by a 12-pack of CR123A lithium batteries, which power the device.
Karatteristiċi ewlenin:
- Sors tad-Dawl: C4 LED delivers 1000 lumens; 20,000 candela peak beam intensity; 283m beam distance; runs 1.5 hours.
- Ottika: TIR optic produces a concentrated beam with optimum peripheral illumination.
- Sistema ta 'Immuntar: Ferrovija clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of the muzzle.
- Kompatibilità: Mounts directly to guns compatible with Glock-style rails and to all MIL-STD-1913 (Picatinny) rails. Includes keys for Glock-style, Picatinny, Beretta 90two, S&W 99, S&W TSW, and Sig P320.
- Kostruzzjoni: Durable, anodized machined aluminum construction with high temperature, shock-mounted glass lens.
- Swiċċ: Ambidextrous momentary/steady on/off switch.
- Strobe User programmable strobe can be enabled/disabled.
- Holster Fit: Fits existing light bearing holsters.
- Reżistenza għall-Ilma: IPX7 waterproof to 1m for 30 minutes.
- Qawwa: Powered by two CR123A lithium batteries (included).
2. Setup
Installazzjoni tal-batterija
- Unscrew the head of the flashlight counter-clockwise to open the battery compartment.
- Insert two CR123A lithium batteries with the positive (+) end facing towards the flashlight head.
- Screw the flashlight head back on clockwise until it is finger-tight.
A close-up of the included Streamlight CR123A lithium batteries, which are essential for powering the TLR-1 HL flashlight. These batteries provide reliable and long-lasting performance.
Mounting the Flashlight
- Identify the appropriate key for your firearm's rail type (Glock-style, Picatinny, Beretta 90two, S&W 99, S&W TSW, Sig P320). The TLR-1 HL comes with a key kit to ensure proper fit.
- Ħoll il-ferrovija clamp thumb screw on the flashlight.
- Allinja l-linji tal-flashlightamp with your firearm's accessory rail.
- Press the flashlight firmly onto the rail, ensuring the key engages with the rail slot.
- Tighten the thumb screw until the flashlight is securely attached and does not wobble.
This image provides a detailed side view of the TLR-1 HL flashlight, showcasing its durable anodized machined aluminum construction and the integrated rail clamp system designed for quick and secure attachment.
The TLR-1 HL flashlight is shown mounted on a pistol, illustrating how it integrates seamlessly with the firearm's rail system. This compact design ensures it fits existing light-bearing holsters.
Ieħor view of the TLR-1 HL mounted on a pistol, highlighting its compatibility with Glock-style rails and MIL-STD-1913 (Picatinny) rails. The light's low profile maintains the firearm's balance.
3. Istruzzjonijiet Operattivi
Operazzjoni tal-Iswiċċ
The TLR-1 HL features an ambidextrous momentary/steady on/off switch located at the rear of the unit.
- Momentarju Fuq: Press and hold either side of the toggle switch. The light will remain on as long as the switch is held. Release to turn off.
- Continuous On: Quickly tap either side of the toggle switch and release. The light will remain on until you toggle the switch again.
- Mitfi: From continuous on, quickly tap either side of the toggle switch.
Funzjoni Strobe
The TLR-1 HL includes a user-programmable strobe function. This feature can be enabled or disabled based on user preference.
- To Activate Strobe (if enabled): From the OFF position, rapidly double-tap either side of the toggle switch.
- To Program Strobe (Enable/Disable): Consult the detailed programming instructions provided in the full product manual or on the Streamlight websit.
4. Manutenzjoni
Kura Ġenerali
- Keep the flashlight clean from dirt, dust, and debris. Use a soft, damp drapp għat-tindif.
- Periodically clean and lubricate the O-rings with silicone grease to maintain water resistance.
- Aħżen il-flashlight f'post frisk u niexef meta ma tkunx qed tuża.
Sostituzzjoni tal-batterija
- Always replace both CR123A batteries at the same time.
- Use only high-quality CR123A lithium batteries.
- Armi batteriji użati skont ir-regolamenti lokali.
5. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Tip ta' Sors tad-Dawl | LED (C4) |
| Luminożità abjad | 1000 Lumens |
| L-intensità tar-raġġ tal-quċċata | 20,000 kandela |
| Distanza tal-Passaġġ tad-Dawl | 283 Meters |
| Runtime | 1.5 sigħat |
| Sors tal-Enerġija | Mħaddma bil-batterija |
| Tip ta 'batterija | 2 x CR123A Lithium (included) |
| Voltage | 6 Volts (DC) |
| Livell ta 'Reżistenza għall-Ilma | IPX7 (Reżistenti għall-ilma sa 1m għal 30 minuta) |
| Materjal | Anodized Machined Aircraft Aluminum |
| Kulur | Flat Dark Earth (Tan) |
| Tip ta 'Immuntar | Muntatura tal-Pistola |
6 Issolvi l-problemi
- Id-dawl ma jixgħelx:
- Iċċekkja l-orjentazzjoni tal-batterija.
- Ensure batteries are fresh and fully charged.
- Tighten the flashlight head securely.
- Dawl Intermittenti:
- Clean battery contacts and O-rings.
- Ensure the flashlight is securely mounted and the thumb screw is tight.
- Strobe Not Activating:
- Verify that the strobe function is enabled in the user-programmable settings.
7. Garanzija u Appoġġ
Streamlight products are known for their quality and durability. For detailed warranty information, product registration, or technical support, please visit the official Streamlight webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta’ garanzija.
