Introduzzjoni
The TOA SR-S4S is a high-performance, two-way line array speaker system designed for short-distance sound transmission. Its unique design allows for precise sound projection and consistent audio levels across various distances. This manual provides essential information for the proper setup, operation, and maintenance of your SR-S4S speaker system.
Informazzjoni dwar is-Sigurtà
Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korrimenti personali u ħsara lit-tagħmir:
- Sors tal-Enerġija: Ensure the speaker is connected to a power source that matches its voltage rekwiżiti.
- Ventilazzjoni: Timblokkax il-fetħiet tal-ventilazzjoni. Kun żgur li jkun hemm fluss tal-arja adegwat madwar l-unità biex tevita li tisħon iżżejjed.
- Umdità: Keep the speaker away from water or excessive moisture. This product is not waterproof.
- Immuntar: When mounting, ensure the structure can support the speaker's weight (approximately 16 kg / 42.8 pounds). Use appropriate mounting hardware and follow all local building codes.
- Servizzi: Tippruvax isservi dan il-prodott int stess. Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.
Prodott Overview
The SR-S4S speaker system is engineered for optimal sound distribution, featuring a robust design and advanced acoustic components.
Immaġni: Quddiem view of the TOA SR-S4S Short Throw 2-Way Line Array Speaker System. The speaker is a tall, slender, rectangular unit with a perforated metal grille covering the front face. The enclosure is light gray, and visible bolts secure the side panels. The TOA logo is subtly visible near the bottom of the grille.
Karatteristiċi ewlenin:
- Equipped with eight 10cm woofers for powerful low-frequency output.
- Features 24 small tweeters for clear high-frequency sound reproduction.
- Linear sound source effect minimizes energy attenuation over distance, enhancing long-distance sound projection.
- Suppressed vertical sound dispersion directs sound precisely to the target area.
- Maintains consistent sound pressure levels, preventing excessive loudness near the speaker.
- Allows for configuration of longer sound sources by joining 2 or 3 speakers, increasing projection distance and volume.
- Includes a built-in network circuit for single amplifier drive.
- Can be converted to a bi-amplifier drive system by modifying internal connections.
- Supports high-impedance applications with the optional MT-S0601 Matching Transformer.
Setup
Follow these steps for the initial setup of your SR-S4S speaker system:
- Spakkjar: Neħħi l-ispiker bir-reqqa mill-imballaġġ tiegħu. Spezzjona għal kwalunkwe sinjal ta’ ħsara waqt it-trasport.
- Pjazzament: Position the speaker in the desired location. Ensure it is on a stable, level surface or securely mounted according to professional installation guidelines. Consider the speaker's directivity angle (90° Horizontal / 10° Vertical) for optimal sound coverage.
- Konnessjoni: Qabbad il-kelliem ma' tiegħek amplifier using appropriate speaker cables. The SR-S4S features M5 screw terminals and Neutrik NL4MP x2 input connectors. Ensure correct polarity (+ to + and - to -).
- Fakultattiv Bi-Amping: If using a bi-amplifier drive system, refer to the detailed wiring diagram in the advanced setup guide (not included in this manual) for internal connection changes.
- Optional Matching Transformer: For high-impedance applications, install the optional MT-S0601 Matching Transformer as per its instructions.
- Qawwa Mixgħul: Once all connections are secure, power on your amplifier and audio source. Start with the volume at its lowest setting.
Operazzjoni
Operating the SR-S4S is straightforward once properly set up:
- Kontroll tal-Volum: Adjust the volume level using your amplifier's controls. Avoid setting the volume too high, which can cause distortion or damage to the speaker.
- Ottimizzazzjoni tal-ħoss: For optimal sound quality, consider using a digital processor like the DP-0206 (optional) to fine-tune the frequency response.
- Integrazzjoni tas-Sistema: The SR-S4S is designed to integrate seamlessly into various audio setups, from small venues to larger installations requiring precise sound projection.
Manutenzjoni
Regular maintenance ensures the longevity and performance of your SR-S4S speaker system:
- Tindif: Use a soft, dry cloth to wipe down the exterior of the speaker. Do not use abrasive cleaners, solvents, or excessive moisture.
- Spezzjoni: Periodically check all cable connections for tightness and signs of wear. Ensure mounting hardware remains secure.
- Ħażna: If storing the speaker for an extended period, keep it in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
Issolvi l-problemi
If you encounter issues with your SR-S4S speaker, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda output tal-ħoss | Konnessjonijiet tal-kejbil sfużi jew mhux korretti Ampl-alimentatur mhux mixgħul Għażla ta' input mhux korretta fuq ampaktar ħaj | Iċċekkja l-ispikers kollha u ampkonnessjonijiet ta 'lifier. Tiżgura ampIl-lifer huwa mixgħul u qed jaħdem. Verify correct input source is selected on ampaktar ħaj. |
| Ħoss distort | Volum għoli wisq Damaged speaker cable Ampqtugħ tal-lifier | Naqqas il-livell tal-volum. Spezzjona l-kejbils tal-ispikers għal ħsara; ibdel jekk meħtieġ. Iċċekkja amplifier's output level and ensure it's not overdriven. |
| Ħoss intermittenti | Konnessjoni maħlula Cable difettuż | Assigura l-konnessjonijiet kollha. Try a different speaker cable to isolate the issue. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, ikkuntattja l-appoġġ għall-klijenti ta' TOA jew tekniku tas-servizz kwalifikat.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Tip ta' Kompartiment | Tip ta ’rifless baxx |
| Kapaċità tal-Immaniġġjar tal-Enerġija | Continuous program 600W |
| Impedenza Rated | 8Ω |
| Sensittività (1W, 1m) | 93dB |
| Rispons ta' Frekwenza | 70-20000Hz (when using DP-0206 (option)) |
| Frekwenza Crossover | 3500Hz |
| Angolu tad-Direttività | Orizzontali: 90°, Vertikali: 10° |
| Low Frequency Component | 10cm cone-type x8 |
| High Frequency Component | 2.5cm balanced dome-type x24 |
| Konnetturi tad-dħul | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x2 |
| Dimensjonijiet (W x H x D) | 160 x 892 x 303mm (6.3 x 35.1 x 11.9 pulzieri) |
| Piż | 16 kg (35.3 lbs) / Item Weight: 42.8 pounds (from product data) |
| Numru tal-Mudell | SR-S4S |
Garanzija u Appoġġ
For warranty information, please refer to the warranty card included with your product or visit the official TOA website. For technical support, replacement parts, or service inquiries, please contact TOA customer service through their official channels. Provide your product model number (SR-S4S) and serial number when contacting support.
TOA Electronics
Manufacturer of the SR-S4S Line Array Speaker System.
