VELUX io-homecontrol Remote Control Wall Mount (Model 860979) Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation and use of the VELUX io-homecontrol Remote Control Wall Mount, Model 860979. This genuine VELUX spare part is designed to securely hold your compatible VELUX io-homecontrol remote controls, ensuring they are always accessible and organized. It is suitable for remote controls used with VELUX solar and electric blinds.

2. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha li ġejjin huma inklużi fil-pakkett tiegħek:

• 1 x VELUX io-homecontrol Wall Mount (consisting of a base and a cover)
• 4 x Viti tal-Immuntar
• 4 x Ankri tal-ħajt

Stampa 2.1: The image displays the complete set of components included with the VELUX io-homecontrol Remote Control Wall Mount. This includes the white plastic wall mount itself, which appears to be in two parts (a base and a cover), four metal screws, and four grey plastic wall anchors for secure installation.

3. Informazzjoni dwar is-Sigurtà

Please read and understand these safety instructions before installation and use:

• Ensure the mounting surface is suitable and can support the weight of the wall mount and remote control.
• Use appropriate tools for drilling and fastening. Wear safety glasses when drilling.
• Keep small parts (screws, anchors) out of reach of children to prevent choking hazards.
• Do not overtighten screws, as this may damage the wall mount or the mounting surface.

4. Setup u Installazzjoni

Follow these steps to properly install your VELUX io-homecontrol Remote Control Wall Mount:

1. Agħżel Post: Select a convenient and easily accessible location on a wall where you wish to store your remote control. Ensure there are no electrical wires or pipes behind the chosen spot.
2. Immarka l-Punti tat-Tħaffir: Place the wall mount base against the wall at your desired height and use a pencil to mark the positions for the mounting screws.
3. Drill toqob: Using an appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill holes at the marked positions. The depth should be sufficient for the wall anchors.

Stampa 4.1: This image shows a white wall next to a wooden door and a light switch. To the right of the light switch, the small, grey base of the remote control wall mount is temporarily placed against the wall, indicating where it will be installed. This step involves marking the precise drilling points for the screws.

4. Daħħal l-ankri tal-ħajt: Tektek bil-mod l-ankri tal-ħajt fit-toqob imtaqqbin sakemm ikunu mal-wiċċ tal-ħajt.
5. Waħħal il-Bażi: Align the holes in the wall mount base with the wall anchors. Insert the mounting screws through the base and into the anchors. Tighten the screws until the base is firmly secured to the wall. Do not overtighten.

Stampa 4.2: The image displays the white wall mount base, now securely fastened to the wall using screws and anchors. It is positioned to the right of a standard light switch, demonstrating the completed attachment of the base component before the cover is applied.

6. Waħħal il-Qoxra: Once the base is secure, snap or slide the decorative cover onto the base. Ensure it clicks into place for a neat finish.
7. Insert Remote Control: Gently slide your compatible VELUX io-homecontrol remote control into the installed wall mount. It should fit snugly.

Stampa 4.3: This image shows the final installation of the VELUX io-homecontrol remote control wall mount. The white remote control is now securely placed within the mounted holder, which is positioned on a white wall adjacent to a light switch and a wooden door frame, illustrating the product in its intended use.

5. Istruzzjonijiet Operattivi

Using the VELUX io-homecontrol Remote Control Wall Mount is straightforward:

• To store your remote control, simply slide it into the wall mount until it is securely held.
• To use your remote control, gently pull it out of the wall mount.

The mount is designed for VELUX io-homecontrol remote controls with model numbers 860963, 946494, and 3UR B01.

6. Manutenzjoni

Biex tiżgura l-lonġevità u d-dehra tal-muntatura tal-ħajt tiegħek:

• Clean the wall mount periodically with a soft, damp drapp.
• Evita li tuża prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Ensure the remote control is clean before placing it in the mount to prevent dirt buildup.

7 Issolvi l-problemi

If you encounter any issues with your wall mount, consider the following:

• Il-muntatura tħossha maħlula: Check if the mounting screws are securely tightened. If the wall anchors are loose, you may need to re-install the mount using new anchors or in a slightly different position.
• Remote control does not fit: Verify that your remote control is a compatible VELUX io-homecontrol model (860963, 946494, or 3UR B01). This wall mount is specifically designed for these models.
• Remote control falls out: Ensure the remote is fully inserted into the mount. If the mount is damaged, it may need replacement.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or technical support regarding your VELUX io-homecontrol Remote Control Wall Mount, please refer to the official VELUX website or contact VELUX customer service directly. Keep your proof of purchase for any warranty claims.