1. Informazzjoni dwar is-Sigurtà
Always read and understand all safety warnings and instructions before operating the JET AFS-1000C Air Filtration System. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Kun żgur li l-unità tkun ertjata kif suppost.
- Do not operate in wet conditions or expose to rain.
- Always disconnect power before servicing or changing filters.
- Keep children and unauthorized persons away from the unit.
- Mount the unit securely to a sturdy structure capable of supporting its weight.
- Use only specified replacement filters.
- Dan il-prodott fih kimiċi magħrufa mill-Istat ta’ Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni, żur www.P65Warnings.ca.gov.
2. Prodott Aktarview
The JET AFS-1000C is an advanced air filtration system designed to maintain clean air in workshops and similar environments. It features an automatic air quality sensor that adjusts fan speed based on dust levels, and a filter status indicator to notify users when filters need replacement.
Figure 2.1: JET AFS-1000C Air Filtration System, showing its compact design and control panel.
Karatteristiċi ewlenin:
- Automatic air quality sensor adjusts six fan speeds.
- Electrostatic outer filter captures 5-micron particles.
- Inner filter captures 1-micron particles.
- Bright, clear, angled LED display panel for easy viewing.
- Filter status indicator for timely filter replacement.
- Radio frequency remote for speed and timer adjustments.
- Strong, injection molded plastic housing dampens vibration and noise (67dB at highest speed).
- Quiet and efficient BLDC motor.
3. Komponenti Inklużi
The JET AFS-1000C package includes the following items:
- Air Filtration Unit (AFS-1000C)
- Filtru ta 'ġewwa
- Filtru ta 'barra
- Kontroll mill-bogħod
- 1 CR2032 Battery (għall-remot)
- 4 Eye Bolts (for mounting)
Figure 3.1: Included remote control and eye bolts for installation.
4. Setup
Immuntar tal-Unità:
- Identify a suitable location for mounting, preferably in the center of your workspace for optimal air circulation.
- Ensure the mounting surface (e.g., ceiling joists) can safely support the unit's weight (approximately 33 pounds) plus any additional stress from operation.
- Install the four provided eye bolts securely into the mounting surface.
- Using appropriate chains or cables (not included), suspend the air filtration unit from the eye bolts, ensuring it is level and stable.
- Connect the unit to a standard 120V power outlet.
Figure 4.1: The AFS-1000C unit properly mounted in a workshop environment.
5. Istruzzjonijiet Operattivi
Panel tal-Kontroll u Remot:
The AFS-1000C can be operated directly from its front-mounted LED control panel or via the included radio frequency remote control. The angled LED display provides clear visibility, especially when the unit is ceiling-mounted.
Figura 5.1: Dettaljat view of the easy-to-read LED display panel.
Power On/Off:
Press the power button on the control panel or remote to turn the unit on or off.
Aġġustament tal-veloċità tal-fann:
The unit features six fan speeds, ranging from 450 CFM to 1000 CFM. Use the 'Speed' buttons on the control panel or remote to cycle through the available speeds. The automatic air quality sensor will adjust the fan speed as needed based on detected dust levels.
Figura 5.2: Intern view highlighting the quiet and efficient BLDC motor.
Funzjoni Timer:
Set the unit to run for a specified duration using the 'Timer' function. The timer can be set for up to 16 hours, after which the unit will automatically shut off. This is useful for clearing the air after you leave the workspace.
Indikatur tal-Istatus tal-Filtru:
The control panel includes a filter status indicator that displays the condition of your filters: 'Good', 'Replace Soon', or 'Replace'. Monitor this indicator to ensure optimal filtration performance.
6. Manutenzjoni
Filter Replacement and Cleaning:
The AFS-1000C utilizes a two-stage filtration system: an electrostatic outer filter (5-micron) and an inner filter (1-micron). Regular inspection and replacement of filters are crucial for maintaining air quality and unit efficiency.
Figura 6.1: Illustrazzjoni taż-żewġ-stage filtration process, capturing particles down to 1 micron.
Figure 6.2: The air filtration unit with its filters clearly visible.
When the filter status indicator shows 'Replace Soon' or 'Replace', follow these steps:
- Skonnettja l-unità mis-sors tal-enerġija.
- Carefully open the filter access panel.
- Remove the old filters. Note that the electrostatic outer filter (part number 708731) is disposable, while the inner filter (part number 708733) is a three-bag heavy-duty cloth filter.
- For the inner filter, if it's a washable type (part number 708732), clean it according to manufacturer instructions. Otherwise, replace both filters with new ones.
- Insert the new or cleaned filters, ensuring they are properly seated.
- Agħlaq il-pannell tal-aċċess għall-filtru b'mod sikur.
- Reconnect power and reset the filter indicator if necessary (refer to control panel instructions).
Optional specialty filters are available, such as a washable electrostatic outer filter (708732) for reusability and a charcoal filter (708734) for odor and smoke elimination.
7 Issolvi l-problemi
If your JET AFS-1000C is not operating as expected, consider the following common issues:
- L-unità ma tixgħelx: Check if the power cord is securely plugged into a 120V outlet. Verify the outlet has power.
- Fluss tal-arja jew effiċjenza mnaqqsa: Check the filter status indicator. Clogged filters significantly reduce performance and need to be cleaned or replaced. Ensure there are no obstructions to the air intake or exhaust.
- Storbju mhux tas-soltu: Verify the unit is securely mounted and not vibrating against any surfaces. Check that filters are properly installed and not loose. If noise persists, contact customer support.
- Il-kontroll mill-bogħod ma jaħdimx: Replace the CR2032 battery in the remote. Ensure there are no obstructions between the remote and the unit.
Għal kwistjonijiet li ma jiġux solvuti b'dawn il-passi, jekk jogħġbok irreferi għat-taqsima tal-Garanzija u l-Appoġġ.
8. Speċifikazzjonijiet
| Speċifikazzjoni | Valur |
|---|---|
| Numru tal-Mudell | AFS-1000C |
| Manifattur | JPW Industries |
| Numru tal-Parti | 713000 |
| Piż tal-oġġett | 33 liri |
| Dimensjonijiet tal-Prodott | 30.13 x 24.25 x 15.38 pulzieri |
| Sors tal-Enerġija | Corded Elettriku |
| Voltage | 120 Volts |
| Horsepower | 0.33 |
| Livell tal-ħoss | 67 dB (at highest speed) |
| Filter Type (Outer) | Electrostatic (5-micron) |
| Filter Type (Inner) | 1-mikron |
| Timer | Sa 16 sigħat |
| Komponenti Inklużi | Air Filtration Unit, Inner Filter, Outer Filter, Remote Control, 1 CR2032 Battery, 4 Eye Bolts |
| Materjal | Plastik iffurmat bl-injezzjoni |
| Kulur | Abjad |
9. Garanzija u Appoġġ
Informazzjoni dwar il-garanzija:
The JET AFS-1000C Air Filtration System comes with a 5-Sena Garanzija for residential use. If the product is used for commercial or industrial purposes, the warranty defaults to a 2-Sena GaranzijaJekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Figure 9.1: The 5-Year Warranty emblem.
Appoġġ għall-Klijent:
For technical assistance, parts, or warranty inquiries, please contact Jet customer support. Refer to the contact information provided in your product packaging or visit the official Jet webis-sit għad-dettalji ta' appoġġ l-aktar aġġornati.
