PROVISION ISR 2MP IP PoE Camera Instruction Manual

1. Prodott Aktarview

This manual provides detailed instructions for the installation, operation, and maintenance of your PROVISION ISR 2MP IP PoE Camera. This camera is designed for both indoor and outdoor surveillance, offering high-definition video and robust features for security applications.

Karatteristiċi ewlenin:

• Immaġini b'Riżoluzzjoni Għolja: 2MP video capture for clear and detailed surveillance.
• Qawwa fuq Ethernet (PoE): Jissimplifika l-installazzjoni billi jipprovdi l-enerġija u d-dejta fuq kejbil Ethernet wieħed.
• Viżjoni bil-lejl Avvanzata: Infrared (IR) illumination up to 10 meters for clear imaging in low-light or total darkness.
• Disinn reżistenti għat-temp: Klassifikazzjoni IP67 għall-protezzjoni kontra t-trab u l-ilma, adattata għall-użu fuq barra.
• Sejbien ta' Moviment Intelliġenti: AI-based alerts for precise human movement detection.
• Kompressjoni H.265+: Efficient video compression to reduce storage requirements while maintaining video quality.
• Mikrofonu inkorporat: For audio monitoring capabilities.
• Aġġustament 3-Assi: Allows flexible positioning of the camera lens.

Figura 1: Quddiem view of the PROVISION ISR 2MP IP PoE Dome Camera.

Figura 2: Qiegħ view of the PROVISION ISR 2MP IP PoE Dome Camera, showing the lens and mounting points.

2. Setup u Installazzjoni

2.1 Kontenut tal-Pakkett

• PROVISION ISR 2MP IP PoE Camera
• Manwal ta 'Istruzzjoni (dan id-dokument)
• Viti u Ankri tal-Immuntar

2.2 Camera Components and Connections

Figure 3: Camera dimensions and connection interfaces. The camera features a Power In port, an RJ-45 port for Ethernet and Power over Ethernet (PoE), and an Audio In port.

Figure 4: Location of the built-in microphone and the SD card slot for local storage.

2.3 Immuntar tal-Kamera

1. Agħżel Post: Agħżel post adattat ġewwa jew barra, u tiżgura kamp ċar ta' dawl. view and access to network cabling. The camera is designed for ceiling mount installation.
2. Ipprepara l-wiċċ: Use the provided mounting template (if applicable, or measure the camera base) to mark the drill holes on the mounting surface.
3. Drill toqob: Drill pilot holes for the mounting screws. Insert wall anchors if mounting on drywall or other soft materials.
4. Sikura l-Kamera: Align the camera base with the drilled holes and secure it using the provided screws.
5. Aġġusta Angolu: Loosen the adjustment screws (if present) to position the camera lens for the desired viewAngolu ing. Issikka l-viti ladarba jkunu aġġustati.

Figure 5: The 3-Axis Mechanism allows for flexible adjustment of the camera's viewing angle (350° pan, 50° tilt, 355° rotation).

2.4 Konnessjoni tal-Kamera

1. Network Connection (PoE): Connect an Ethernet cable from a PoE-enabled switch or NVR directly to the camera's RJ-45 port. This will provide both power and network connectivity.
2. Network Connection (Non-PoE): If your network device does not support PoE, connect an Ethernet cable to the camera's RJ-45 port and connect a 12V DC power adapter (sold separately) to the camera's Power In port.
3. Input Awdjo: If external audio input is required, connect an audio source to the Audio In port.

3. It-tħaddim tal-Kamera

3.1 Aċċess u Konfigurazzjoni Inizjali

1. Skoperta tan-Netwerk: Use the manufacturer's provided software tool (e.g., IP Scanner) to discover the camera's IP address on your network.
2. Web Aċċess għall-Interfaċċja: Iftaħ a web browser and enter the camera's IP address. Log in using the default username and password (refer to the camera's quick start guide or manufacturer's documentation for default credentials).
3. Ibdel il-Kredenzjali Predefiniti: For security purposes, immediately change the default username and password upon first login.
4. Issettjar tan-Netwerk: Configure network settings such as static IP address (if desired), subnet mask, and gateway.

3.2 Monitoraġġ u Reġistrazzjoni tal-Vidjo

• Live View: Access the camera's live video feed through the web interface, NVR, or compatible mobile application.
• Reġistrazzjoni: Configure recording schedules, motion-triggered recording, or continuous recording via the NVR or camera's web interface. The camera supports H.265+ compression for efficient storage.
• Ħażna tal-Kard SD: Insert a compatible microSD card (up to specified capacity, typically 128GB or 256GB, not included) into the SD card slot for local video storage. Format the SD card through the camera's web interface qabel l-użu.

3.3 Sejbien tal-Mozzjoni u Twissijiet

• Konfigurazzjoni: Access the motion detection settings in the camera's web interface. Define detection zones, sensitivity levels, and trigger actions (e.g., record, send email notification).
• AI-based Detection: Utilize the camera's AI capabilities for more accurate human movement detection, reducing false alarms.

3.4 Viżjoni bil-lejl

The camera automatically switches to infrared (IR) night vision mode in low-light conditions. The IR illuminators provide clear black-and-white video up to 10 meters. Ensure no obstructions block the IR LEDs for optimal performance.

4. Manutenzjoni

4.1 Tindif

• Lenti: Gently wipe the camera lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution designed for optical surfaces.
• Djar: Naddaf il-housing tal-kamera b'reklamaramp drapp. Evita li tuża kimiċi ħarxa jew tindif li joborxu.

4.2 Aġġornamenti tal-Firmware

Iċċekkja perjodikament l-uffiċjal tal-ISR tad-DISPOŻIZZJONI website for firmware updates. Firmware updates can improve camera performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

5 Issolvi l-problemi

5.1 No Power/No Video

• Iċċekkja l-Enerġija: Ensure the camera is receiving power. If using PoE, verify the PoE switch/NVR port is active. If using a power adapter, ensure it is correctly connected and functional.
• Cable tan-Netwerk: Verify the Ethernet cable is securely connected at both ends and is not damaged. Try a different cable.
• Ribootja mill-ġdid: Disconnect and reconnect power to the camera to perform a reboot.

5.2 Cannot Access Camera via Network

• Indirizz IP: Confirm the camera's IP address using the discovery tool. Ensure your computer is on the same network segment as the camera.
• Firewall: Check if your computer's firewall or network security settings are blocking access to the camera.
• Settings default: If you have forgotten the password, you may need to reset the camera to factory defaults (refer to manufacturer's documentation for reset procedure).

5.3 Kwalità Fqira tal-Immaġni

• Lenti Naddaf: Kun żgur li l-lenti tal-kamera hija nadifa u ħielsa mit-trab jew tbajja’.
• Dawl: Verify adequate lighting in the surveillance area. For night vision, ensure IR LEDs are not obstructed.
• Settings tar-Riżoluzzjoni: Check the video resolution settings in the camera's web interface to ensure it is set to 2MP or desired quality.

6. Speċifikazzjonijiet

Figure 6: Visual summary of key camera specifications and features.

7. Garanzija u Appoġġ

7.1 Garanzija tal-Prodott

PROVISION ISR products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official PROVISION ISR websit għal termini u kundizzjonijiet dettaljati tal-garanzija speċifiċi għar-reġjun u l-mudell tiegħek.

7.2 Appoġġ Tekniku

For technical assistance, troubleshooting, or further inquiries, please contact PROVISION ISR customer support. Contact information can usually be found on the official PROVISION ISR websit jew fl-ippakkjar tal-prodott.

You can visit the PROVISION ISR store on Amazon for more information: PROVISION ISR Store