GOLOZA Projection Alarm Clock User Manual

Introduzzjoni

Grazzi tax-xiriasing the GOLOZA Projection Alarm Clock. This digital clock features a modern curved design, a 180° rotatable projector, 3-level brightness dimmer for both the display and projection, clear red LED digits, progressive alarm volume, and a 9-minute snooze function. It also includes a USB charging port for your mobile devices. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

Karatteristiċi Ewlenin

• Integrated Projector: 180-degree rotatable arm for optimal positioning, projecting clear time figures on walls or ceilings (0.5-3m distance).
• Display LED Kbir: Curved screen with 3.4*1.7-inch digits for easy readability.
• Luminożità aġġustabbli: 3 levels of brightness for both the main display and the projected time.
• Port tal-Iċċarġjar tal-USB: Built-in 5V/1A USB output to charge mobile devices.
• Progressive Alarm Volume: Alarm sound gradually increases (up to 75dB) for a gentle wake-up.
• Funzjoni Snooze: Large snooze button provides an extra 9 minutes of sleep.
• Disinn faċli għall-utent: Large, clearly marked control buttons for easy operation.
• Batterija ta 'Backup inkorporata: CR2032 button cell battery saves time and alarm settings during power outages.
• Disinn Mgħawweġ Stylish: Mimics eye curvature for comfortable viewing and reduced eyestrain.

Gwida ta' Setup

1. Konnessjoni tal-Enerġija

Connect the provided AC adapter (AC100-240V, 50/60Hz) to the clock's power input and plug it into a wall outlet. The clock will power on and the display will light up.

Figure 1: GOLOZA Projection Alarm Clock connected to power.

2. Backup tal-Batterija

The clock comes with a built-in CR2032 button cell battery. This battery automatically saves your time and alarm settings in case of a power outage. The display will go blank and the alarm will not sound during an outage, but settings will be retained when power returns. No need to reset.

Figure 2: Location of the built-in CR2032 battery for backup.

3. Issettjar tal-Ħin u l-Allarm

Refer to the 'Operating Instructions' section for detailed steps on setting the current time, 12/24H format, and alarm settings using the control buttons on top of the clock.

Istruzzjonijiet Operattivi

1. Time Display and Brightness

The clock features a large LED display. Use the dedicated brightness button (often marked with a sun icon) on the top of the clock to cycle through 3 brightness levels (e.g., High, Medium, Low) or turn the display off completely. This allows you to adjust visibility for day or night.

Figure 3: Adjusting the display brightness for optimal viewing.

2. Format 12/24 Hour

The clock supports both 12-hour and 24-hour time formats. A dedicated button (often marked with '12/24H' or similar) allows you to switch between these modes. In 12-hour mode, a 'PM' indicator will appear for afternoon times.

Figure 4: Switching between 12-hour and 24-hour time formats.

3. Karatteristika tal-Projezzjoni

The integrated projector allows you to display the time on your wall or ceiling. The projector arm can swivel 180 degrees for optimal positioning.

• Attiva l-Projezzjoni: Short press the projection button (often marked with a projector icon) to turn the projection on.
• Aġġusta Angolu: Rotate the projector arm 180 degrees to direct the time display to your desired surface (wall or ceiling).
• Aġġusta l-luminożità: Short press the projection button repeatedly to cycle through 3 brightness levels (Low, Medium, High) or turn the projection off.
• Flip Projection: If the projected numbers appear upside down, long press the projection button to flip them 180 degrees for correct orientation.

Figure 5: Time projected clearly on a surface.

Figure 6: Detailed steps for using the projection feature.

Video Demonstration: Projection Feature

4. Alarm and Snooze

The alarm features a progressive buzzer volume, starting softly and gradually increasing in loudness and speed.

• Issettja Allarm: Use the alarm setting buttons (often marked with a bell icon) to set your desired wake-up time.
• Activate Snooze: When the alarm sounds, press the large SNOOZE button on the top of the clock to get an additional 9 minutes of sleep. The alarm will sound again after 9 minutes.
• Itfi l-allarm: To completely turn off the alarm for the day, press any other button besides the SNOOZE button.

Figure 7: Using the 9-minute snooze function.

5. Port tal-Iċċarġjar tal-USB

The clock includes a 5V/1A USB output port on the side, allowing you to charge your smartphone or other mobile devices. Use your device's original USB charging cable for best results.

Figure 8: Charging a mobile device using the integrated USB port.

Manutenzjoni

To ensure the longevity and optimal performance of your GOLOZA Projection Alarm Clock, follow these simple maintenance guidelines:

• Tindif: Wipe the clock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• Pjazzament: Poġġi l-arloġġ fuq wiċċ stabbli u ċatt 'il bogħod mix-xemx diretta, sħana eċċessiva, jew umdità.
• Qawwa: Always use the original AC adapter provided with the clock.

Issolvi l-problemi

Speċifikazzjonijiet tal-Prodott

Garanzija u Appoġġ

Your GOLOZA Projection Alarm Clock is covered by a 24-il xahar garanzija mid-data tax-xiri.

For any questions, technical support, or warranty claims, please contact GOLOZA customer service through your purchase platform:

• Go to your Account.
• Navigate to Orders.
• Select Order Detail for your GOLOZA Projection Alarm Clock.
• Find "Sold by: GOLOZA" and click "Ask a question".

Figure 9: GOLOZA customer support contact method.