Manwal tal-Utent tas-Siġġu tal-Uffiċċju tad-Disinn Lussuż Tectake

1. Introduzzjoni

Thank you for choosing the tectake Luxurious Design Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

Quddiem view of the tectake office chair in white faux leather, showcasing its design and comfortable appearance.

2. Istruzzjonijiet tas-Sigurtà

• Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-assemblaġġ. Tużax jekk xi partijiet huma neqsin jew imkissra.
• Arma s-siġġu fuq wiċċ artab u nadif biex tevita l-grif.
• Toqgħodx bilwieqfa fuq is-siġġu. Użah biss biex toqgħod bilqiegħda.
• Do not exceed the maximum weight capacity (information not provided, assume standard office chair limits, e.g., 120 kg / 265 lbs).
• Żomm lit-tfal u l-annimali domestiċi 'l bogħod waqt l-assemblaġġ. Partijiet żgħar jistgħu jkunu perikolużi biex wieħed jifga.
• Iċċekkja regolarment il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati.

3. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha li ġejjin huma inklużi fil-pakkett tiegħek:

• Serħ tad-dahar (1)
• Sedil (1)
• Armrests (2)
• Ċilindru tal-Irfigħ tal-Gass (1)
• Bażi tal-Istilla (1)
• Xandara (5)
• Pjanċa tal-Mekkaniżmu (1)
• Pakkett tal-Ħardwer (viti, woxers, ċavetta Allen)
• Manwal ta' Istruzzjoni (1)

4. Twaqqif (Istruzzjonijiet tal-Assemblaġġ)

Follow these steps to assemble your tectake office chair:

1. Waħħal ir-Roti mal-Bażi: Daħħal il-ħames roti fit-toqob fit-tarf ta’ kull sieq tal-bażi tal-istilla. Imbotta sew sakemm jidħlu f’posthom.
2. Daħħal il-Gass Lift: Poġġi ċ-ċilindru tal-irfigħ tal-gass fit-toqba taċ-ċentru tal-bażi tal-istilla.
3. Waħħal il-Pjanċa tal-Mekkaniżmu mas-Sedil: Align the mechanism plate with the pre-drilled holes on the underside of the seat. Ensure the front of the mechanism plate faces the front of the seat. Secure with screws from the hardware pack.
4. Attach Armrests to Seat and Backrest: Attach the armrests to the sides of the seat using the provided screws. Then, attach the backrest to the armrests and the seat, securing all connections with screws. Do not overtighten until all screws are in place.
5. Qabbad l-Assemblea tas-Sedil mal-Lift tal-Gass: Poġġi s-sedil u d-dahar immuntati bir-reqqa fuq iċ-ċilindru tal-irfigħ tal-gass, filwaqt li tiżgura li t-tarf koniku tal-irfigħ tal-gass jidħol sew fil-pjanċa tal-mekkaniżmu.

5. Istruzzjonijiet Operattivi

Your tectake office chair is designed for comfort and adjustability. Familiarize yourself with its functions:

5.1. Aġġustament tal-Għoli

To adjust the chair's height, pull the lever located under the right side of the seat upwards. While holding the lever, either stand up to raise the chair or sit down to lower it. Release the lever at your desired height to lock it in place.

5.2. Tilt Function

The chair features a tilt mechanism for reclining. Pull the same lever outwards to enable the tilt function, allowing the chair to rock back and forth. Push the lever inwards to lock the chair in an upright position.

Close-up of the chair's adjustment lever for height and tilt, and a detail of the smooth-rolling casters.

6. Manutenzjoni

Proper care will extend the life of your office chair:

• Tindif: For the faux leather and plastic parts, wipe with a soft, damp cloth. Use a mild soap solution if necessary, then wipe dry. Avoid harsh chemicals or abrasive cleaners.
• Spezzjoni: Periodically check all screws and bolts to ensure they are tight. Retighten if loose.
• Xandara: Keep the casters clean and free of debris (hair, dust) to ensure smooth rolling.

Close-up of the armrest material, showing the faux leather texture and stitching, highlighting the quality of the upholstery.

7 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bis-siġġu tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

• Is-siġġu ma jaġġustax l-għoli: Kun żgur li l-lieva tal-gass lift hija kompletament attivata. Jekk il-problema tippersisti, iċ-ċilindru tal-gass lift jista' jkollu bżonn jiġi mibdul.
• Is-siġġu jitbandal: Check all assembly screws and ensure they are securely tightened. Make sure the gas lift is properly seated in the base and mechanism plate.
• Ir-roti ma jdurux bla xkiel: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.
• Ħsejjes ta' tgergir: Apply a small amount of silicone lubricant to moving parts or connections if squeaking occurs.

8. Speċifikazzjonijiet

Key technical details for the tectake Luxurious Design Office Chair:

Diagram illustrating the key dimensions of the office chair for reference.

9. Garanzija u Appoġġ

For warranty information or technical support, please contact tectake customer service through their official webis-sit jew il-bejjiegħ bl-imnut minn fejn xtrajt il-prodott. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.