1. Introduzzjoni
The Ahuja AI-22 is a compact and versatile 2x2 USB audio interface designed for recording, playback, and various audio applications. It provides high-quality audio conversion, allowing you to connect microphones, instruments, and other audio sources to your computer for professional-grade sound capture and monitoring. This manual provides essential information for setting up, operating, and maintaining your AI-22 audio interface.
Figura 1.1: Ahuja AI-22 Audio Interface, highlighting its diverse applications including conferencing, e-teaching, podcasting, and music production.
2. Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek. Jekk xi oġġetti huma neqsin jew bil-ħsara, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek.
Figura 2.1: The AI-22 package includes the audio interface, a Micro USB to USB Type A cable, and four anti-skid base feet.
- Ahuja AI-22 Audio Interface
- Micro USB Cable (USB 2.0 to USB Type A)
- Anti-Skid Base Feet (4 pieces)
3. Prodott Aktarview
Familiarize yourself with the front panel controls and indicators of your AI-22 audio interface.
Figura 3.1: Dettaljati view of the Ahuja AI-22 front panel, illustrating all inputs, control knobs, and status indicators.
Karatteristiċi tal-Panew ta 'quddiem:
- MIC/LINE Inputs (L/R): Combo XLR/TRS jacks for connecting microphones or line-level sources.
- INST Inputs: 1/4-inch TS jacks for connecting high-impedance instruments like guitars or basses.
- Indikaturi tal-CLIP: Red LEDs that illuminate when the input signal is too high, indicating potential clipping. Adjust gain to prevent clipping.
- SIG Indicators: Green LEDs that illuminate when an input signal is present.
- Buttuna tal-MONITOR DIRETT: Engages direct monitoring, allowing you to hear your input signal directly from the interface with zero latency.
- Pum tal-ĦRUĠ: Controls the overall output level to your monitor speakers or headphones.
- +48V Indicator: Red LED indicating that +48V phantom power is active for condenser microphones.
- Indikatur tal-QAWWA: Green LED indicating the device is powered on.
- Ħruġ tal-headphones: 1/4-inch TRS jack for connecting headphones.
4. Setup
4.1 Rekwiżiti tas-Sistema
- Operating System: Windows (compatible with most modern Windows versions).
- Port USB disponibbli.
- Kompjuter Personali.
4.2 Connecting the AI-22
- Qabbad mal-Kompjuter: Use the provided Micro USB cable to connect the AI-22 to an available USB port on your computer. The POWER indicator on the front panel will illuminate.
- Installa Sewwieqa (jekk meħtieġ): The AI-22 is typically a class-compliant USB audio device, meaning it should work with standard drivers built into your operating system. If your computer does not automatically recognize the device or if you experience issues, please visit the official Ahuja website for specific driver downloads or troubleshooting guides.
- Qabbad il-Mikrofoni/Strumenti:
- For microphones, connect via the XLR input of the MIC/LINE jacks. If using a condenser microphone, activate +48V phantom power (refer to Section 5.2).
- For line-level sources (e.g., mixer output), connect via the TRS input of the MIC/LINE jacks.
- For instruments (e.g., guitar, bass), connect via the INST jacks.
- Qabbad Apparat tal-Output:
- For monitor speakers, connect from the rear panel outputs (not explicitly shown in images, but implied by 'OUTPUT' knob).
- For headphones, connect to the 1/4-inch TRS Headphone Output on the front panel.
5. Istruzzjonijiet Operattivi
5.1 Aġġustament tal-Qligħ tad-Dħul
- Adjust the gain knob for each input (MIC/LINE, INST) until the SIG indicator lights up consistently during signal presence.
- Ensure the CLIP indicator does not light up, as this indicates signal distortion. If it does, reduce the gain.
5.2 Qawwa Phantom (+48V)
- If using a condenser microphone, press the +48V button to supply phantom power. The +48V indicator will illuminate.
- Do not activate +48V for dynamic microphones or ribbon microphones unless specifically required and supported by the microphone, as it can cause damage.
5.3 Monitoraġġ Dirett
- Press the DIRECT MONITOR button to enable zero-latency monitoring of your input signals. This allows you to hear your performance without delay, which is crucial during recording.
- When direct monitoring is active, the input signal is routed directly to the outputs (headphones and main outputs) before being processed by the computer.
5.4 Output Level Control
- Use the OUTPUT knob to adjust the overall listening volume for your monitor speakers and headphones.
5.5 Common Usage Scenarios
Figura 5.1: AI-22 configured for classroom teaching, enabling recording and playback of lectures via USB connection to a computer and output to an ampaktar ħaj.
Figura 5.2: AI-22 in a studio setup, connecting instruments and microphones to a computer for recording, with output to monitor speakers and headphones.
Figura 5.3: AI-22 integrated into a video conferencing system, facilitating audio input from multiple microphones and output through an ampaktar ħaj.
6. Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-unità. Evita li tuża prodotti tat-tindif, solventi, jew xama' li joborxu.
- Ħażna: Store the AI-22 in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Kura tal-Cable: Handle USB and audio cables carefully. Avoid sharp bends or excessive pulling to prevent damage.
- Ventilazzjoni: Ensure the unit has adequate ventilation and is not covered during operation to prevent overheating.
7 Issolvi l-problemi
If you encounter issues with your AI-22, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Bla enerġija (l-LED tal-POWER mitfi) | USB cable not connected or faulty; computer USB port issue. | Ensure USB cable is securely connected to both the AI-22 and the computer. Try a different USB port or cable. |
| L-ebda sinjal tad-dħul (l-LED SIG mitfi) | Microphone/instrument not connected; gain too low; incorrect input selected in software. | Check cable connections. Increase input gain. Verify input selection in your recording software. |
| Distorted input signal (CLIP LED on) | Il-qligħ tad-dħul huwa għoli wisq. | Reduce the input gain until the CLIP LED no longer illuminates. |
| L-ebda ħoss tal-ħruġ | Output volume too low; incorrect output device selected in computer settings; faulty cables/speakers/headphones. | Increase the OUTPUT knob. Check your computer's sound settings to ensure the AI-22 is selected as the output device. Test with different cables or output devices. |
| Latenza waqt il-monitoraġġ | Direct monitoring not enabled; software latency. | Press the DIRECT MONITOR button. Adjust buffer size settings in your recording software to reduce latency. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | AI-22 |
| Dimensjonijiet tal-Prodott (LxWxH) | 16 x 22 x 10 Ċentimetru |
| Piż tal-oġġett | 500 g |
| Numru ta 'Kanali | 2 |
| Teknoloġija tal-Konnettività | USB (for computer connection), XLR/TRS (for inputs) |
| Apparati Kompatibbli | Kompjuter Personali |
| Sistema Operattiva | Windows |
| Manifattur | AHUJA |
| Pajjiż ta' Oriġini | Indja |
9. Garanzija u Appoġġ
The warranty for the Ahuja AI-22 audio interface is provided as per manufacturer terms and conditions. For detailed warranty information, technical support, or service inquiries, please visit the official Ahuja websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.
For the most up-to-date information and resources, please refer to the manufacturer's official websit: www.ahujaradios.com
