SENSEA Extensible Shower Curtain Rod

Introduzzjoni

Thank you for choosing the SENSEA Extensible Shower Curtain Rod. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new shower rod. Please read these instructions carefully before use and retain them for future reference.

Informazzjoni dwar is-Sigurtà

• Ensure the rod is securely installed between two stable surfaces.
• Do not hang excessive weight on the rod, as this may cause it to fall and result in injury or damage.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Regularly check the rod's stability to ensure it remains firmly in place.

Kontenut tal-Pakkett

Your SENSEA Extensible Shower Curtain Rod package should contain:

• 1 x SENSEA Extensible Shower Curtain Rod (Black Aluminum)

Note: Shower curtain and hooks are not included.

Setup u Installazzjoni

The SENSEA extensible shower curtain rod is designed for quick and easy installation without the need for drilling or tools, thanks to its integrated spring mechanism. It adapts perfectly to your wall width without causing damage.

Figura 1: The SENSEA shower curtain rod, illustrating its no-drill installation and adjustable length range of 1.20 meters to 2.20 meters.

1. Kejjel l-Ispazju: Determine the desired width for your shower curtain rod. The rod is adjustable from 120 cm to 220 cm.
2. Extend the Rod: Hold the rod with both hands. Twist one end of the rod to unlock the extension mechanism. Gently pull the rod to extend it slightly beyond the measured width of your installation area (approximately 2-3 cm longer).
3. Pożizzjona l-Virga: Place one end of the rod against one wall at the desired height. Compress the rod slightly by pushing the other end against the opposite wall.
4. Sikur fil-post: Once positioned, release the pressure. The internal spring mechanism will exert tension, holding the rod firmly between the two walls. Ensure the rod is level and stable.
5. Kontroll Finali: Gently tug on the rod to confirm it is securely installed and will not slip.

Figura 2: Detail of the rod's end cap, designed for secure, non-slip contact with wall surfaces.

Istruzzjonijiet Operattivi

Once the SENSEA shower curtain rod is securely installed, its operation is straightforward:

1. Hang Your Curtain: Attach your shower curtain to the rod using appropriate shower curtain hooks or rings.
2. Adjust Curtain Position: Slide the shower curtain along the rod as needed to open or close your shower area.

Figura 3: A shower curtain properly hung on the rod, demonstrating typical use.

Manutenzjoni

To ensure the longevity and appearance of your SENSEA shower curtain rod, follow these simple maintenance guidelines:

• Tindif: Wipe the rod regularly with a soft, damp drapp. Għal marki iebsa, tista' tintuża soluzzjoni ta' sapun ħafif. Evita prodotti tat-tindif li joborxu jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
• Spezzjoni: Periodically check the rod for any signs of wear or damage. Ensure the end caps are intact and the rod remains securely tensioned between the walls.
• Prevenzjoni tas-sadid: The aluminum construction is designed to resist rust, but wiping it dry after showering can help maintain its condition, especially in high-humidity environments.

Issolvi l-problemi

Speċifikazzjonijiet

• Ditta: Sensea
• Numru tal-Mudell: 3276000702214
• Tip: Extensible Shower Curtain Rod
• Materjal: Aluminju
• Kulur: Iswed
• Tul aġġustabbli: 120 ċm sa 220 ċm (47.2 pulzieri sa 86.6 pulzieri)
• Tip ta' Installazzjoni: Wall-mounted (tension-based, no drilling required)
• Dimensjonijiet tal-Prodott (L x W x H): Approximately 130 x 10 x 6 cm (collapsed); 200 grams

Appoġġ u Garanzija

SENSEA products are designed for reliability and to meet your needs. For any questions or assistance regarding your shower curtain rod, please refer to the retailer where you purchased the product or visit the official SENSEA websit għal informazzjoni dwar l-appoġġ għall-klijenti.

Informazzjoni dwar id-disponibbiltà tal-ispare parts mhijiex ipprovduta.