Informazzjoni Importanti dwar is-Sigurtà
Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in injury or damage to the product.
- Consult a healthcare professional before use if you have pre-existing medical conditions, are pregnant, have electronic implants (e.g., pacemaker), or are undergoing medical treatment.
- Do not immerse the main control unit in water or expose it to excessive moisture.
- Żomm l-apparat fejn ma jintlaħaqx mit-tfal u l-annimali domestiċi.
- Uża biss l-adapter tal-enerġija fornut mal-unità.
- Ensure the wrist strap is worn during operation to complete the circuit.
- Discontinue use immediately if you experience any discomfort, pain, or unusual reactions.
- Do not use the device on open wounds, irritated skin, or areas with skin conditions.
- This device is intended for personal use and is not a medical device. Statements regarding this product have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:
- 1 x Main Control Unit
- 2 x Ionic Arrays
- 2 x Ċineg tal-polz
- 2 x Waist Belts
- 1 x Kurduni tal-Enerġija
- 1 x Manwal għall-Utent
- 1 x Kaxxa tal-Ġarr tal-Aluminju
Prodott Overview
The veicomtech Dual Ionic Foot Bath Detox Spa is designed to facilitate an ionic foot bath experience for one or two users simultaneously. It features a digital LCD display for easy monitoring and control, along with various operating modes and accessories for a customizable session.
Karatteristiċi ewlenin:
- Dual-User Capability: Allows two individuals to use the system concurrently.
- Display LCD diġitali: Provides clear visual feedback on selected modes, time, and intensity.
- Multiple Foot Bath Modes: Offers 8 distinct modes with adjustable session times.
- Adjustable Heating Belts: Includes 2 waist belts with 3 temperature settings.
- Disinn portabbli: Comes with an aluminum carrying case for convenient storage and transport.
Setup Istruzzjonijiet
Follow these steps to set up your veicomtech Dual Ionic Foot Bath Detox Spa:
- Ħoll l-Unità: Carefully remove all components from the aluminum carrying case.
- Pjazzament: Place the main control unit on a flat, stable, and dry surface, away from any water sources.
- Qabbad l-Enerġija: Insert the power cord into the power interface located on the back of the main unit. Then, plug the power cord into a standard electrical outlet.
- Prepare Foot Basins: Fill two non-metallic foot basins with warm tap water. Ensure the water level is sufficient to cover the ionic arrays and your feet. Do not overfill.
- Insert Ionic Arrays: Place one ionic array into each foot basin. Ensure the array is fully submerged in the water.
- Connect Arrays: Connect the cables from the ionic arrays to the 'ARRAY' ports on the front of the main unit.
- Attach Wrist Straps: Securely attach a wrist strap to each user's wrist. Connect the wrist strap cables to the 'WRIST STRAP' ports on the main unit. Ensure good skin contact for proper operation.
- Optional: Connect Waist Belts: If desired, connect the waist belts to the 'WAIST BELT' interfaces on the back of the main unit.
Istruzzjonijiet Operattivi
Once the unit is set up, follow these steps to begin your ionic foot bath session:
- Qawwa Mixgħul: Press the power button on the main unit to turn it on. The LCD display will illuminate.
- Agħżel il-Modalità: Use the 'MODE' buttons (A Mode / B Mode for each user) to select the desired foot bath program. The unit offers 8 different modes. Refer to the specific mode descriptions in the full manual for details.
- Aġġusta Ħin: Use the 'DETOX TIME' buttons to set the duration of your session. Typical sessions range from 20 to 30 minutes.
- Adjust Grade (Intensity): Use the 'GRADE' buttons to adjust the intensity level of the ionic process. It is recommended to start with a lower setting and gradually increase if comfortable.
- Ibda Sessjoni: Press the 'DETOX ON/OFF' button to begin the foot bath session.
- Using Waist Belts (Optional): If connected, use the 'BELT' buttons to activate and adjust the temperature of the heating waist belts. There are 3 temperature modes available.
- Wiri tal-Monitor: The LCD display will show the selected mode, time remaining, and current intensity level for each user.
- Session Completion: The unit will automatically shut off when the set time expires. A beep may sound to indicate completion.
- Itfi: After the session, press the power button to turn off the unit and unplug it from the power outlet.
Manutenzjoni
Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tat-tagħmir tiegħek:
- Tindif tal-Arrays: After each use, rinse the ionic arrays thoroughly with clean water. For stubborn residue, soak them in a mixture of 50% white vinegar and 50% water for 10-15 minutes, then scrub gently with a non-abrasive brush. Rinse completely before storage.
- Tindif tal-Unità Prinċipali: Imsaħ l-unità prinċipali b'artab, damp drapp. Tużax prodotti tat-tindif li joborxu, solventi, u lanqas tgħaddas l-unità fl-ilma.
- Ħażna: Store the unit and all accessories in the provided aluminum carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Array Lifespan: Ionic arrays have a limited lifespan and will need to be replaced periodically depending on usage frequency and water quality. Replace arrays when their performance diminishes or they show significant wear.
Issolvi l-problemi
If you encounter any issues with your device, refer to the table below for common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-unità ma tixgħelx. | Power cord not securely connected; power outlet not active. | Ensure the power cord is firmly plugged into both the unit and a working electrical outlet. Test the outlet with another device. |
| No ionic activity (no water color change or very little). | Ionic array not connected or faulty; insufficient salt in water; wrist strap not connected or making poor contact. | Check that the array and wrist strap cables are securely connected. Ensure the wrist strap makes good skin contact. Add a small pinch of non-iodized salt to the water to improve conductivity (do not over-salt). Replace the array if it is worn out. |
| Display shows error message or beeps continuously. | Excessive salt concentration in water; array malfunction; internal error. | If using salt, reduce the salt concentration in the water. Clean or replace the ionic arrays. If the problem persists, power off the unit, unplug it, wait a few minutes, and then restart. If the error continues, contact customer support. |
| Waist belt not heating. | Waist belt not connected properly; heating function not activated. | Ensure the waist belt is securely connected to the unit's 'WAIST BELT' interface. Activate the heating function using the 'BELT' buttons on the control panel. |
Speċifikazzjonijiet
- Numru tal-Mudell: 2022
- Ditta: veicomtech
- Sors tal-Enerġija: Corded Elettriku
- Main Unit Material: Plastic (Aluminum for carrying case)
- Piż tal-Pakkett: Madwar 16.64-il Lira
- Dimensjonijiet tal-pakkett: 17.09 x 13.5 x 7.44 pulzieri
- Kapaċità tal-Utent: Dual (1 to 2 people)
- Foot Bath Modes: 8
- Heating Belt Modes: 3 settings tat-temperatura
Garanzija u Appoġġ
For detailed warranty information, technical assistance, or customer support, please refer to the contact details provided with your original purchase documentation. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.
You may also visit the official veicomtech webis-sit għal aktar riżorsi u informazzjoni ta’ appoġġ.
