Manwal tal-Utent tal-Kamera tad-Dome tan-Netwerk PT Full-Color 4MP tas-Serje Dahua Lite

1. Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your Dahua Lite Series 4MP Full-Color PT Network Dome Camera. Please read this manual carefully before using the product and retain it for future reference. This camera is designed for surveillance applications, offering high-resolution imaging with pan and tilt capabilities, full-color night vision, and robust weather protection.

2. Setup

2.1 Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:

• Dahua Lite Series 4MP Full-Color PT Network Dome Camera
• Mudell tal-Immuntar
• Viti tal-Immuntar u Plugs tal-Ħajt
• Konnettur li ma jgħaddix ilma minnu għal Kejbil tan-Netwerk
• Gwida Quick Start

2.2 Installazzjoni Fiżika

Choose a suitable mounting location that provides the desired surveillance coverage and is within reach of power and network connections. Ensure the mounting surface is strong enough to support the camera's weight.

Stampa 1: Ġenb view of the Dahua PT Network Dome Camera, illustrating the integrated mounting bracket for wall or ceiling installation. This view highlights the camera's robust housing and the articulation point for pan and tilt movements.

1. Immuntar: Use the provided mounting template to mark drill holes on the wall or ceiling. Drill the holes and insert the wall plugs. Secure the mounting bracket of the camera using the provided screws.
2. Wiring: Connect the network cable to the camera's Ethernet port. Use the waterproof connector to protect the connection from environmental elements. If not using Power over Ethernet (PoE), connect a 12V DC power adapter (not included) to the power input.

Stampa 2: Wara view of the Dahua PT Network Dome Camera, detailing the network port and power input. This image is useful for understanding how to connect the necessary cables for operation and ensuring proper sealing for outdoor use.

2.3 Network Connection and Initial Configuration

After physical installation and wiring, power on the camera.

1. Qawwa Mixgħul: Connect the power supply. The camera will perform a self-test, which may involve a brief pan/tilt movement.
2. Aċċess għan-Netwerk: The camera typically obtains an IP address automatically via DHCP. If DHCP is not available, it will default to a static IP address (refer to the Quick Start Guide for the default IP).
3. Web Interface: Iftaħ a web browser on a computer connected to the same network. Enter the camera's IP address in the address bar.
4. Idħol: Enter the default username and password (usually 'admin'/'admin' or specified in the Quick Start Guide). You will be prompted to change the password upon first login for security reasons.

Stampa 3: Quddiem view of the Dahua PT Network Dome Camera, showcasing the lens, IR illuminators, and white light LEDs. This perspective is crucial for understanding the camera's field of view and its full-color night vision capabilities.

3. Joperaw

3.1 Aċċess għall- Web Interface

Ladarba illoggjat fil- web interface, you can access various camera functions and settings.

3.2 Ħaj View u Daqq

Navigate to the 'Live View' section to see real-time video feed. The 'Playback' section allows you to review irreġistrat footage stored on an inserted SD card or network video recorder (NVR).

3.3 PT (Pan/Tilt) Control

The camera supports pan and tilt movements. Use the directional controls within the web interface to adjust the camera's viewing angle. The pan range allows for horizontal rotation, and the tilt range allows for vertical adjustment.

3.4 Full-Color and IR/White Light Modes

This camera features both IR (infrared) and white light illumination for night vision. In low-light conditions, the camera can switch to full-color mode using its white light LEDs to capture vivid, color images, or use IR for discreet black-and-white surveillance. These modes can be configured in the camera's settings.

3.5 Settings tar-Reġistrazzjoni

Configure recording schedules, motion detection triggers, and storage locations (e.g., local SD card, NVR, NAS) through the recording settings menu.

3.6 Sejbien tal-Moviment

Set up motion detection zones and sensitivity levels to trigger alarms, recordings, or notifications when movement is detected within the specified areas.

4. Manutenzjoni

4.1 Tindif tal-Lenti

Regularly clean the camera lens with a soft, dry cloth to ensure clear image quality. Avoid using abrasive cleaners or solvents.

4.2 Aġġornamenti tal-Firmware

Iċċekkja perjodikament l-uffiċjal ta' Dahua websit għal aġġornamenti tal-firmware. Iż-żamma tal-firmware aġġornat tiżgura prestazzjoni ottimali, sigurtà, u aċċess għal karatteristiċi ġodda. Segwi l-istruzzjonijiet ipprovduti mal-pakkett tal-aġġornament tal-firmware bir-reqqa.

4.3 Kontrolli regolari

Inspect the camera's physical condition, mounting, and cable connections periodically to ensure everything is secure and free from damage.

4.4 Konsiderazzjonijiet Ambjentali

The camera has an IP66 rating, indicating it is protected against dust ingress and powerful water jets. While robust, avoid directing high-pressure water streams directly at the camera. Ensure proper drainage around the installation area to prevent water accumulation.

5 Issolvi l-problemi

5.1 Kwistjonijiet Komuni

• Ebda Qawwa: Check power connections and ensure the power adapter (if used) is functioning. If using PoE, verify the PoE switch/injector is active.
• L-ebda Konnessjoni man-Netwerk: Verify the Ethernet cable is securely connected. Check network settings (IP address, gateway, DNS). Ensure the camera and viewing device are on the same network or properly routed.
• Kwalità Fqira tal-Immaġni: Clean the lens. Check lighting conditions. Adjust image settings (brightness, contrast, saturation) in the web interface.
• PT Control Not Responding: Ensure the camera is properly powered and connected to the network. Restart the camera.

5.2 Irrisettjar il-Kamera

If issues persist, you may need to reset the camera to factory default settings. Refer to the Quick Start Guide or the camera's web interface for instructions on performing a factory reset. This will erase all custom configurations.

5.3 Ikkuntattja l-Appoġġ

If you encounter problems that cannot be resolved using this manual, please contact your vendor or Dahua technical support for assistance.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija, jekk jogħġbok irreferi għall-karta tal-garanzija inkluża mal-prodott tiegħek jew ikkonsulta l-websajt uffiċjali ta' Dahua. website. Technical support can be obtained through your authorized dealer or by visiting the Dahua support portal online.